Re: [PATCH] iio: Clear timestamps fifo while resetting hardware fifo

[Jonathan Cameron <jic23@kernel.org>]

On 16/02/15 22:59, Viorel Suman wrote:
> A hardware fifo reset always imply an invalidation of the
> existing timestamps, so we'll clear timestamps fifo on
> successfull hardware fifo reset.
For reference, this wants iio:inv_mpu6050 as a prefix as the current
implies it is IIO in general rather than the particular driver.
> 
> Signed-off-by: Viorel Suman <viorel.suman@gmail.com>
> ---
>  drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 25 ++++++++++++++-----------
>  1 file changed, 14 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
> index 0cd306a..ba27e27 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
> @@ -24,6 +24,16 @@
>  #include <linux/poll.h>
>  #include "inv_mpu_iio.h"
>  
> +static void inv_clear_kfifo(struct inv_mpu6050_state *st)
> +{
> +	unsigned long flags;
> +
> +	/* take the spin lock sem to avoid interrupt kick in */
> +	spin_lock_irqsave(&st->time_stamp_lock, flags);
> +	kfifo_reset(&st->timestamps);
> +	spin_unlock_irqrestore(&st->time_stamp_lock, flags);
> +}
> +
>  int inv_reset_fifo(struct iio_dev *indio_dev)
>  {
>  	int result;
> @@ -50,6 +60,10 @@ int inv_reset_fifo(struct iio_dev *indio_dev)
>  					INV_MPU6050_BIT_FIFO_RST);
>  	if (result)
>  		goto reset_fifo_fail;
> +
> +	/* clear timestamps fifo */
> +	inv_clear_kfifo(st);
> +
>  	/* enable interrupt */
>  	if (st->chip_config.accl_fifo_enable ||
>  	    st->chip_config.gyro_fifo_enable) {
> @@ -83,16 +97,6 @@ reset_fifo_fail:
>  	return result;
>  }
>  
> -static void inv_clear_kfifo(struct inv_mpu6050_state *st)
> -{
> -	unsigned long flags;
> -
> -	/* take the spin lock sem to avoid interrupt kick in */
> -	spin_lock_irqsave(&st->time_stamp_lock, flags);
> -	kfifo_reset(&st->timestamps);
> -	spin_unlock_irqrestore(&st->time_stamp_lock, flags);
> -}
> -
>  /**
>   * inv_mpu6050_irq_handler() - Cache a timestamp at each data ready interrupt.
>   */
> @@ -184,7 +188,6 @@ end_session:
>  flush_fifo:
>  	/* Flush HW and SW FIFOs. */
>  	inv_reset_fifo(indio_dev);
> -	inv_clear_kfifo(st);
>  	mutex_unlock(&indio_dev->mlock);
>  	iio_trigger_notify_done(indio_dev->trig);
>  
>