Re: [PATCH 2/3] iio: bindings: Add TI afe4403 heart monitor documentation

[Jonathan Cameron <jic23@kernel.org>]

On 22/04/15 17:32, Dan Murphy wrote:
> Add the TI afe4403 heart monitor device tree
> binding documentation.  heart_monitors directory
> created under iio.
> 
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> ---
>  .../bindings/iio/heart_monitor/ti_afe4403.txt      | 26 ++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/heart_monitor/ti_afe4403.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/heart_monitor/ti_afe4403.txt b/Documentation/devicetree/bindings/iio/heart_monitor/ti_afe4403.txt
> new file mode 100644
> index 0000000..b196b17
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/heart_monitor/ti_afe4403.txt
> @@ -0,0 +1,26 @@
> +* Texas Instruments - AFE4403 Heart rate and Pulse Oximeter
> +
> +The device consists of a low-noise receiver channel
> +with an integrated analog-to-digital converter (ADC),
> +an LED transmit section, and diagnostics for sensor and LED fault detection.
> +
> +Required properties:
> +  - compatible: Must contain "ti,afe4403".
> +  - ste-gpio: GPIO for the spi control line
This gpio needs more info here.  From description it sounds like a chip select
and those obviously don't need to be specified at driver level.

> +  - data-ready-gpio: GPIO interrupt when the afe4403 has data
> +  - led-supply: Chip supply to the device
> +
> +Optional properties:
> +  - reset-gpio: GPIO used to reset the device via HW
> +
> +Example:
> +
> +&heart_rate {
> +	compatible = "ti,afe4403";
> +	ste-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
> +	data-ready-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
> +	led-supply = <&vbat>;
> +};
> +
> +Technical Datasheet:
> +http://www.ti.com/product/AFE4403/datasheet
>