From: Jonathan Cameron <jic23@kernel.org>
To: Irina Tirdea <irina.tirdea@intel.com>,
linux-iio@vger.kernel.org, Hartmut Knaack <knaack.h@gmx.de>
Cc: linux-kernel@vger.kernel.org, Vlad Dogaru <vlad.dogaru@intel.com>
Subject: Re: [PATCH v2 11/17] iio: accel: mma9553: prefix naming fixes
Date: Sun, 26 Apr 2015 19:49:37 +0100 [thread overview]
Message-ID: <553D3341.7000202@kernel.org> (raw)
In-Reply-To: <1428939664-12503-12-git-send-email-irina.tirdea@intel.com>
On 13/04/15 16:40, Irina Tirdea wrote:
> Add mma9553_ prefix to all local functions/declarations.
>
> Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
> Suggested-by: Hartmut Knaack <knaack.h@gmx.de>
app
> ---
> drivers/iio/accel/mma9553.c | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/iio/accel/mma9553.c b/drivers/iio/accel/mma9553.c
> index 47cb14b..9573147 100644
> --- a/drivers/iio/accel/mma9553.c
> +++ b/drivers/iio/accel/mma9553.c
> @@ -76,8 +76,8 @@
> #define MMA9553_DEFAULT_GPIO_PIN mma9551_gpio6
> #define MMA9553_DEFAULT_GPIO_POLARITY 0
>
> -#define STATUS_TO_BITNUM(bit) (ffs(bit) - 9)
> /* Bitnum used for GPIO configuration = bit number in high status byte */
> +#define MMA9553_STATUS_TO_BITNUM(bit) (ffs(bit) - 9)
>
> #define MMA9553_DEFAULT_SAMPLE_RATE 30 /* Hz */
>
> @@ -351,11 +351,11 @@ static int mma9553_conf_gpio(struct mma9553_data *data)
> * This bit is the logical OR of the SUSPCHG, STEPCHG, and ACTCHG flags.
> */
> if (activity_enabled && ev_step_detect->enabled)
> - bitnum = STATUS_TO_BITNUM(MMA9553_MASK_STATUS_MRGFL);
> + bitnum = MMA9553_STATUS_TO_BITNUM(MMA9553_MASK_STATUS_MRGFL);
> else if (ev_step_detect->enabled)
> - bitnum = STATUS_TO_BITNUM(MMA9553_MASK_STATUS_STEPCHG);
> + bitnum = MMA9553_STATUS_TO_BITNUM(MMA9553_MASK_STATUS_STEPCHG);
> else if (activity_enabled)
> - bitnum = STATUS_TO_BITNUM(MMA9553_MASK_STATUS_ACTCHG);
> + bitnum = MMA9553_STATUS_TO_BITNUM(MMA9553_MASK_STATUS_ACTCHG);
> else /* Reset */
> appid = MMA9551_APPID_NONE;
>
> @@ -948,11 +948,11 @@ static const struct iio_event_spec mma9553_activity_events[] = {
> },
> };
>
> -static const char * const calibgender_modes[] = { "male", "female" };
> +static const char * const mma9553_calibgender_modes[] = { "male", "female" };
>
> static const struct iio_enum mma9553_calibgender_enum = {
> - .items = calibgender_modes,
> - .num_items = ARRAY_SIZE(calibgender_modes),
> + .items = mma9553_calibgender_modes,
> + .num_items = ARRAY_SIZE(mma9553_calibgender_modes),
> .get = mma9553_get_calibgender_mode,
> .set = mma9553_set_calibgender_mode,
> };
>
next prev parent reply other threads:[~2015-04-26 18:49 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-13 15:40 [PATCH v2 00/17] Fixes for the mma9553 driver Irina Tirdea
2015-04-13 15:40 ` [PATCH v2 01/17] iio: accel: mma9553: fix endianness issue when reading status Irina Tirdea
2015-04-26 18:40 ` Jonathan Cameron
2015-04-13 15:40 ` [PATCH v2 02/17] iio: accel: mma9553: check input value for activity period Irina Tirdea
2015-04-26 18:43 ` Jonathan Cameron
2015-04-13 15:40 ` [PATCH v2 03/17] iio: accel: mma9551_core: prevent buffer overrun Irina Tirdea
2015-04-26 18:41 ` Jonathan Cameron
2015-04-13 15:40 ` [PATCH v2 04/17] iio: accel: mma9553: add enable channel for activity Irina Tirdea
2015-04-26 18:42 ` Jonathan Cameron
2015-04-13 15:40 ` [PATCH v2 05/17] iio: accel: mma9551_core: wrong doc fixes Irina Tirdea
2015-04-26 18:45 ` Jonathan Cameron
2015-04-13 15:40 ` [PATCH v2 06/17] iio: accel: mma9551_core: typo fix in RSC APP ID Irina Tirdea
2015-04-26 18:46 ` Jonathan Cameron
2015-04-13 15:40 ` [PATCH v2 07/17] iio: accel: mma9553: check for error in reading initial activity and stepcnt Irina Tirdea
2015-04-26 18:47 ` Jonathan Cameron
2015-04-13 15:40 ` [PATCH v2 08/17] iio: accel: mma9553: return 0 as indication of success Irina Tirdea
2015-04-13 15:40 ` [PATCH v2 09/17] iio: accel: mma9553: comment and error message fixes Irina Tirdea
2015-04-26 18:48 ` Jonathan Cameron
2015-04-13 15:40 ` [PATCH v2 10/17] iio: accel: mma9553: use GENMASK Irina Tirdea
2015-04-26 18:49 ` Jonathan Cameron
2015-04-13 15:40 ` [PATCH v2 11/17] iio: accel: mma9553: prefix naming fixes Irina Tirdea
2015-04-26 18:49 ` Jonathan Cameron [this message]
2015-04-13 15:40 ` [PATCH v2 12/17] iio: accel: mma9553: fix gpio bitnum init value Irina Tirdea
2015-04-26 18:53 ` Jonathan Cameron
2015-04-13 15:41 ` [PATCH v2 13/17] iio: accel: mma9553: refactor mma9553_read_raw Irina Tirdea
2015-04-26 18:53 ` Jonathan Cameron
2015-04-13 15:41 ` [PATCH v2 14/17] iio: accel: mma9551_core: use size in words for word buffers Irina Tirdea
2015-04-26 19:04 ` Jonathan Cameron
2015-04-29 12:20 ` Tirdea, Irina
2015-06-14 15:00 ` Jonathan Cameron
2015-06-23 14:17 ` Tirdea, Irina
2015-04-13 15:41 ` [PATCH v2 15/17] iio: accel: mma9553: fix alignment issues Irina Tirdea
2015-06-14 15:01 ` Jonathan Cameron
2015-04-13 15:41 ` [PATCH v2 16/17] iio: accel: mma9553: document use of mutex Irina Tirdea
2015-06-14 15:02 ` Jonathan Cameron
2015-04-13 15:41 ` [PATCH v2 17/17] iio: accel: mma9553: use unsigned counters Irina Tirdea
2015-06-14 15:04 ` Jonathan Cameron
2015-06-23 14:17 ` Tirdea, Irina
2015-04-26 21:50 ` [PATCH v2 00/17] Fixes for the mma9553 driver Hartmut Knaack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=553D3341.7000202@kernel.org \
--to=jic23@kernel.org \
--cc=irina.tirdea@intel.com \
--cc=knaack.h@gmx.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=vlad.dogaru@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox