From: Jonathan Cameron <jic23@kernel.org>
To: Greg KH <gregkh@linuxfoundation.org>,
"linux-iio@vger.kernel.org" <linux-iio@vger.kernel.org>
Subject: [PULL] IIO new drivers etc for the 4.2 cycle round 1
Date: Thu, 07 May 2015 10:45:25 +0100 [thread overview]
Message-ID: <554B3435.8010300@kernel.org> (raw)
The following changes since commit c610f7f772aa06ae2bd8e5ace87cde4d90f70198:
Merge 4.0-rc7 into staging-next (2015-04-07 11:03:02 +0200)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-v4.2a
for you to fetch changes up to 1038a6872802bb4a07f627162ff989bf49e2e5cc:
iio: magnetometer: support for lsm303dlh (2015-05-07 10:42:34 +0100)
----------------------------------------------------------------
First round of new drivers, functionality and cleanups for the 4.2 cycle
New drivers / device support
* st sensors driver, lsm303dlh magnetometer support.
* ltr501 - support ltr301 and ltr559 chips.
New functionality
* IIO_CHAN_INFO_CALIBEMISSIVITY for thermopile sensors.
* kxcjk1013 - make driver operational with external trigger.
* Add iio targets to the tools Makefile.
Cleanups
* st sensors - more helpful error message if device id wrong or irq request
fails, explicitly make the Block Data Update optional rather
than relying on writes to address 0 not doing anything, make interrupt
support optional (Not always wired, and not all devices actually have
an interrupt line.)
* kxcjk-1013 white space additions for readability, add the KXCJ9000 ACPI
id as seen in the wild.
* sx9500 - GPIO reset support, refactor the GPIO interrupt code, add power
management, optimize power usage by powering down when possible, rename
the gpio interrupt pin to be more useful, trivial return path simplification,
trivial formatting fixes.
* isl29018 - move towards ABI compliance with a view to moving this driver
out of staging, add some brackets to ensure code works as expected. Note
there is no actual bug as the condition being tested is always true
(with current devices).
* ltr501 - add regmap support to get caching etc for later patches,
fix a parameter sanity check that always fails (bug introduced
earlier in this series), ACPI enumeration support,
interrupt rate control support, interrupt support in general and
integration time control support, code alignment cleanups.
* mma9553 - a number of little cleanups following a review from Hartmut
after I'd already applied the original driver patch.
* tmp006 - prefix some defines with TMP006 for consistency.
* tsl4531 - cleanup some wrong prefixes, presumably from copy and paste.
* mlx90614 - check for errors in read values, add power management,
add emissivity setting, add device tree binding documentation,
fix a duplicate const warning.
* ti_am335x_adc - refactor the DT parsing into a separate function.
----------------------------------------------------------------
Antonio Ospite (2):
iio: accel: kxcjk-1013: add the "KXCJ9000" ACPI id
iio: accel: kxcjk-1013: add some blank lines for readability
Daniel Baluta (3):
iio: light: ltr501: Fix alignment to match open parenthesis
iio: ltr501: Add support for ltr559 chip
iio: ltr501: Add support for ltr301 chip
Irina Tirdea (9):
iio: accel: mma9551_core: wrong doc fixes
iio: accel: mma9551_core: typo fix in RSC APP ID
iio: accel: mma9553: check for error in reading initial activity and stepcnt
iio: accel: mma9553: return 0 as indication of success
iio: accel: mma9553: comment and error message fixes
iio: accel: mma9553: use GENMASK
iio: accel: mma9553: prefix naming fixes
iio: accel: mma9553: refactor mma9553_read_raw
iio: accel: mma9553: fix gpio bitnum init value
Jonathan Cameron (3):
iio:light:ltr501 bug in parameter sanity check.
staging:iio:light: Add some missing brackets to make sure code works as intended.
iio:prox:sx9500 trivial simplification of return path in init function.
Kuppuswamy Sathyanarayanan (5):
iio: ltr501: Add regmap support.
iio: ltr501: Add integration time support
iio: ltr501: Add interrupt support
iio: ltr501: Add interrupt rate control support
iio: ltr501: Add ACPI enumeration support
Linus Walleij (5):
iio: st_sensors: print error when failing to get IRQ
iio: st_sensors: make interrupt optional
iio: st_sensors: make BDU optional
iio: st_sensors: make detection more helpful
iio: magnetometer: support for lsm303dlh
Peter Meerwald (3):
iio:tsl4531: Fix leftover TCS3472_ prefix in tsl4531 driver
iio:tsl2563: Use tsl2563_ prefix for driver's functions
iio:tmp006: Prefix #defines with TMP006_
Roberta Dobrescu (4):
tools: iio: Add iio targets in tools Makefile
staging: iio: light: isl29018: Remove non-standard sysfs attributes
staging: iio: light: isl29018: Rename lux_scale to calibscale
staging: iio: light: isl29018: Use standard sysfs attributes for scale and integration time
Vianney le Clément de Saint-Marcq (6):
iio: core: Introduce IIO_CHAN_INFO_CALIBEMISSIVITY
iio: mlx90614: Add devicetree bindings documentation
iio: mlx90614: Add emissivity setting
iio: mlx90614: Add power management
iio: mlx90614: Check for errors in read values
iio: mlx90614: Fix duplicate const warning
Vignesh R (1):
iio: adc: ti_am335x_adc: refactor DT parsing into a function
Vlad Dogaru (7):
iio: accel: kxcjk1013: allow using an external trigger
iio: sx9500: add power management
iio: sx9500: rename GPIO interrupt pin
iio: sx9500: fix formatting
iio: sx9500: optimize power usage
iio: sx9500: refactor GPIO interrupt code
iio: sx9500: add GPIO reset pin
Documentation/ABI/testing/sysfs-bus-iio | 11 +
.../devicetree/bindings/iio/st-sensors.txt | 1 +
.../bindings/iio/temperature/mlx90614.txt | 24 +
.../devicetree/bindings/vendor-prefixes.txt | 1 +
drivers/iio/accel/kxcjk-1013.c | 42 +-
drivers/iio/accel/mma9551_core.c | 8 +-
drivers/iio/accel/mma9551_core.h | 2 +-
drivers/iio/accel/mma9553.c | 148 +--
drivers/iio/adc/ti_am335x_adc.c | 29 +-
drivers/iio/common/st_sensors/st_sensors_core.c | 23 +-
drivers/iio/common/st_sensors/st_sensors_trigger.c | 4 +-
drivers/iio/industrialio-core.c | 1 +
drivers/iio/light/Kconfig | 3 +-
drivers/iio/light/ltr501.c | 1233 ++++++++++++++++++--
drivers/iio/light/tsl2563.c | 36 +-
drivers/iio/light/tsl4531.c | 10 +-
drivers/iio/magnetometer/st_magn.h | 1 +
drivers/iio/magnetometer/st_magn_core.c | 116 ++
drivers/iio/magnetometer/st_magn_i2c.c | 5 +
drivers/iio/proximity/sx9500.c | 457 ++++++--
drivers/iio/temperature/mlx90614.c | 355 +++++-
drivers/iio/temperature/tmp006.c | 6 +-
drivers/staging/iio/light/isl29018.c | 297 ++---
include/linux/iio/iio.h | 1 +
tools/Makefile | 7 +-
25 files changed, 2373 insertions(+), 448 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/temperature/mlx90614.txt
next reply other threads:[~2015-05-07 9:45 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-07 9:45 Jonathan Cameron [this message]
2015-05-09 16:17 ` [PULL] IIO new drivers etc for the 4.2 cycle round 1 Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=554B3435.8010300@kernel.org \
--to=jic23@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox