From: Jonathan Cameron <jic23@kernel.org>
To: Daniel Baluta <daniel.baluta@intel.com>, pmeerw@pmeerw.net
Cc: knaack.h@gmx.de, lars@metafoo.de, linux-kernel@vger.kernel.org,
linux-iio@vger.kernel.org
Subject: Re: [PATCH v2 2/3] iio: magnetometer: mmc35240: Add PM sleep support
Date: Fri, 08 May 2015 10:08:27 -0400 [thread overview]
Message-ID: <554CC35B.2050609@kernel.org> (raw)
In-Reply-To: <1429891112-11888-3-git-send-email-daniel.baluta@intel.com>
On 24/04/15 11:58, Daniel Baluta wrote:
> We rely on regmap to save the state of the registers at suspend,
> and then we do an explicit sync at resume.
>
> Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Applied
> ---
> drivers/iio/magnetometer/mmc35240.c | 35 +++++++++++++++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
>
> diff --git a/drivers/iio/magnetometer/mmc35240.c b/drivers/iio/magnetometer/mmc35240.c
> index beefebc..7a52c3e 100644
> --- a/drivers/iio/magnetometer/mmc35240.c
> +++ b/drivers/iio/magnetometer/mmc35240.c
> @@ -17,6 +17,7 @@
> #include <linux/i2c.h>
> #include <linux/delay.h>
> #include <linux/regmap.h>
> +#include <linux/pm.h>
>
> #include <linux/iio/iio.h>
> #include <linux/iio/sysfs.h>
> @@ -447,6 +448,39 @@ static int mmc35240_probe(struct i2c_client *client,
> return devm_iio_device_register(&client->dev, indio_dev);
> }
>
> +#ifdef CONFIG_PM_SLEEP
> +static int mmc35240_suspend(struct device *dev)
> +{
> + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
> + struct mmc35240_data *data = iio_priv(indio_dev);
> +
> + regcache_cache_only(data->regmap, true);
> +
> + return 0;
> +}
> +
> +static int mmc35240_resume(struct device *dev)
> +{
> + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
> + struct mmc35240_data *data = iio_priv(indio_dev);
> + int ret;
> +
> + regcache_mark_dirty(data->regmap);
> + ret = regcache_sync_region(data->regmap, MMC35240_REG_CTRL0,
> + MMC35240_REG_CTRL1);
> + if (ret < 0)
> + dev_err(dev, "Failed to restore control registers\n");
> +
> + regcache_cache_only(data->regmap, false);
> +
> + return 0;
> +}
> +#endif
> +
> +static const struct dev_pm_ops mmc35240_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(mmc35240_suspend, mmc35240_resume)
> +};
> +
> static const struct i2c_device_id mmc35240_id[] = {
> {"MMC35240", 0},
> {}
> @@ -456,6 +490,7 @@ MODULE_DEVICE_TABLE(i2c, mmc35240_id);
> static struct i2c_driver mmc35240_driver = {
> .driver = {
> .name = MMC35240_DRV_NAME,
> + .pm = &mmc35240_pm_ops,
> },
> .probe = mmc35240_probe,
> .id_table = mmc35240_id,
>
next prev parent reply other threads:[~2015-05-08 18:30 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-24 15:58 [PATCH v2 0/3] Introduce support for MMC35240 magnetic sensor Daniel Baluta
2015-04-24 15:58 ` [PATCH v2 1/3] iio: magnetometer: Add support for MEMSIC MMC35240 sensor Daniel Baluta
2015-05-08 14:08 ` Jonathan Cameron
2015-06-28 23:07 ` Hartmut Knaack
2015-06-29 7:52 ` Daniel Baluta
2015-06-29 19:17 ` Hartmut Knaack
2015-06-30 9:35 ` Daniel Baluta
2015-04-24 15:58 ` [PATCH v2 2/3] iio: magnetometer: mmc35240: Add PM sleep support Daniel Baluta
2015-05-08 14:08 ` Jonathan Cameron [this message]
2015-04-24 15:58 ` [PATCH v2 3/3] iio: magnetometer: Add ACPI support for MMC35240 Daniel Baluta
2015-05-08 14:09 ` Jonathan Cameron
2015-04-26 17:00 ` [PATCH v2 0/3] Introduce support for MMC35240 magnetic sensor Jonathan Cameron
2015-05-08 11:29 ` Daniel Baluta
2015-05-08 14:04 ` jic23
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=554CC35B.2050609@kernel.org \
--to=jic23@kernel.org \
--cc=daniel.baluta@intel.com \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).