* Heart Rate monitors v2
@ 2015-05-11 20:05 Dan Murphy
2015-05-11 20:05 ` [PATCH v2 1/3] iio: heart_monitors: Add an event for heart rate monitors Dan Murphy
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: Dan Murphy @ 2015-05-11 20:05 UTC (permalink / raw)
To: linux-iio; +Cc: jic23
Hi
Wanted to add a cover letter. This series has been completely
reworked per v1 comments and previous RFC comments. Since this
driver has been ripped up I won't even start with detailing out
the changes I have made.
I have decided to rename the directory to "health" to try to
encompass any and all health devices beyond heart monitors.
I do have another driver done for a new part that will be sent
once we get the ABI's figured out for the 4403.
Dan
^ permalink raw reply [flat|nested] 8+ messages in thread* [PATCH v2 1/3] iio: heart_monitors: Add an event for heart rate monitors 2015-05-11 20:05 Heart Rate monitors v2 Dan Murphy @ 2015-05-11 20:05 ` Dan Murphy 2015-05-17 12:52 ` Jonathan Cameron 2015-05-11 20:05 ` [PATCH v2 2/3] iio: bindings: Add TI afe4403 heart monitor documentation Dan Murphy 2015-05-11 20:05 ` [PATCH v2 3/3] iio: health: Add TI afe4403 heart monitor Dan Murphy 2 siblings, 1 reply; 8+ messages in thread From: Dan Murphy @ 2015-05-11 20:05 UTC (permalink / raw) To: linux-iio; +Cc: jic23, Dan Murphy Add an event for heart rate monitors to signal an event once a heart rate measurement has been completed. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- drivers/iio/industrialio-core.c | 1 + include/uapi/linux/iio/types.h | 1 + tools/iio/iio_event_monitor.c | 2 ++ 3 files changed, 4 insertions(+) diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index 4df97f6..b7b3817 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -75,6 +75,7 @@ static const char * const iio_chan_type_name_spec[] = { [IIO_ENERGY] = "energy", [IIO_DISTANCE] = "distance", [IIO_VELOCITY] = "velocity", + [IIO_HEARTRATE] = "heartrate", }; static const char * const iio_modifier_names[] = { diff --git a/include/uapi/linux/iio/types.h b/include/uapi/linux/iio/types.h index 5c46019..b5e8c2f 100644 --- a/include/uapi/linux/iio/types.h +++ b/include/uapi/linux/iio/types.h @@ -35,6 +35,7 @@ enum iio_chan_type { IIO_ENERGY, IIO_DISTANCE, IIO_VELOCITY, + IIO_HEARTRATE, }; enum iio_modifier { diff --git a/tools/iio/iio_event_monitor.c b/tools/iio/iio_event_monitor.c index 427c271..b2cc544 100644 --- a/tools/iio/iio_event_monitor.c +++ b/tools/iio/iio_event_monitor.c @@ -51,6 +51,7 @@ static const char * const iio_chan_type_name_spec[] = { [IIO_HUMIDITYRELATIVE] = "humidityrelative", [IIO_ACTIVITY] = "activity", [IIO_STEPS] = "steps", + [IIO_HEARTRATE] = "heartrate", }; static const char * const iio_ev_type_text[] = { @@ -130,6 +131,7 @@ static bool event_is_known(struct iio_event_data *event) case IIO_HUMIDITYRELATIVE: case IIO_ACTIVITY: case IIO_STEPS: + case IIO_HEARTRATE: break; default: return false; -- 1.9.1 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v2 1/3] iio: heart_monitors: Add an event for heart rate monitors 2015-05-11 20:05 ` [PATCH v2 1/3] iio: heart_monitors: Add an event for heart rate monitors Dan Murphy @ 2015-05-17 12:52 ` Jonathan Cameron 2015-06-02 16:51 ` Dan Murphy 0 siblings, 1 reply; 8+ messages in thread From: Jonathan Cameron @ 2015-05-17 12:52 UTC (permalink / raw) To: Dan Murphy, linux-iio On 11/05/15 21:05, Dan Murphy wrote: > Add an event for heart rate monitors to signal an event > once a heart rate measurement has been completed. > > Signed-off-by: Dan Murphy <dmurphy@ti.com> Not needed by the current driver. > --- > drivers/iio/industrialio-core.c | 1 + > include/uapi/linux/iio/types.h | 1 + > tools/iio/iio_event_monitor.c | 2 ++ > 3 files changed, 4 insertions(+) > > diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c > index 4df97f6..b7b3817 100644 > --- a/drivers/iio/industrialio-core.c > +++ b/drivers/iio/industrialio-core.c > @@ -75,6 +75,7 @@ static const char * const iio_chan_type_name_spec[] = { > [IIO_ENERGY] = "energy", > [IIO_DISTANCE] = "distance", > [IIO_VELOCITY] = "velocity", > + [IIO_HEARTRATE] = "heartrate", > }; > > static const char * const iio_modifier_names[] = { > diff --git a/include/uapi/linux/iio/types.h b/include/uapi/linux/iio/types.h > index 5c46019..b5e8c2f 100644 > --- a/include/uapi/linux/iio/types.h > +++ b/include/uapi/linux/iio/types.h > @@ -35,6 +35,7 @@ enum iio_chan_type { > IIO_ENERGY, > IIO_DISTANCE, > IIO_VELOCITY, > + IIO_HEARTRATE, > }; > > enum iio_modifier { > diff --git a/tools/iio/iio_event_monitor.c b/tools/iio/iio_event_monitor.c > index 427c271..b2cc544 100644 > --- a/tools/iio/iio_event_monitor.c > +++ b/tools/iio/iio_event_monitor.c > @@ -51,6 +51,7 @@ static const char * const iio_chan_type_name_spec[] = { > [IIO_HUMIDITYRELATIVE] = "humidityrelative", > [IIO_ACTIVITY] = "activity", > [IIO_STEPS] = "steps", > + [IIO_HEARTRATE] = "heartrate", > }; > > static const char * const iio_ev_type_text[] = { > @@ -130,6 +131,7 @@ static bool event_is_known(struct iio_event_data *event) > case IIO_HUMIDITYRELATIVE: > case IIO_ACTIVITY: > case IIO_STEPS: > + case IIO_HEARTRATE: > break; > default: > return false; > ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2 1/3] iio: heart_monitors: Add an event for heart rate monitors 2015-05-17 12:52 ` Jonathan Cameron @ 2015-06-02 16:51 ` Dan Murphy 0 siblings, 0 replies; 8+ messages in thread From: Dan Murphy @ 2015-06-02 16:51 UTC (permalink / raw) To: Jonathan Cameron, linux-iio Jonathan On 05/17/2015 07:52 AM, Jonathan Cameron wrote: > On 11/05/15 21:05, Dan Murphy wrote: >> Add an event for heart rate monitors to signal an event >> once a heart rate measurement has been completed. >> >> Signed-off-by: Dan Murphy <dmurphy@ti.com> > Not needed by the current driver. Sorry for the delayed response was working on another driver's comments. This is actually used to announce that that heartrate event is ready to be read. In patch 3/3 in the function call afe4403_event_handler The IIO_HEARTRATE event is pushed. And having the heartrate name spec does not hurt. Dan >> --- >> drivers/iio/industrialio-core.c | 1 + >> include/uapi/linux/iio/types.h | 1 + >> tools/iio/iio_event_monitor.c | 2 ++ >> 3 files changed, 4 insertions(+) >> >> diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c >> index 4df97f6..b7b3817 100644 >> --- a/drivers/iio/industrialio-core.c >> +++ b/drivers/iio/industrialio-core.c >> @@ -75,6 +75,7 @@ static const char * const iio_chan_type_name_spec[] = { >> [IIO_ENERGY] = "energy", >> [IIO_DISTANCE] = "distance", >> [IIO_VELOCITY] = "velocity", >> + [IIO_HEARTRATE] = "heartrate", >> }; >> >> static const char * const iio_modifier_names[] = { >> diff --git a/include/uapi/linux/iio/types.h b/include/uapi/linux/iio/types.h >> index 5c46019..b5e8c2f 100644 >> --- a/include/uapi/linux/iio/types.h >> +++ b/include/uapi/linux/iio/types.h >> @@ -35,6 +35,7 @@ enum iio_chan_type { >> IIO_ENERGY, >> IIO_DISTANCE, >> IIO_VELOCITY, >> + IIO_HEARTRATE, >> }; >> >> enum iio_modifier { >> diff --git a/tools/iio/iio_event_monitor.c b/tools/iio/iio_event_monitor.c >> index 427c271..b2cc544 100644 >> --- a/tools/iio/iio_event_monitor.c >> +++ b/tools/iio/iio_event_monitor.c >> @@ -51,6 +51,7 @@ static const char * const iio_chan_type_name_spec[] = { >> [IIO_HUMIDITYRELATIVE] = "humidityrelative", >> [IIO_ACTIVITY] = "activity", >> [IIO_STEPS] = "steps", >> + [IIO_HEARTRATE] = "heartrate", >> }; >> >> static const char * const iio_ev_type_text[] = { >> @@ -130,6 +131,7 @@ static bool event_is_known(struct iio_event_data *event) >> case IIO_HUMIDITYRELATIVE: >> case IIO_ACTIVITY: >> case IIO_STEPS: >> + case IIO_HEARTRATE: >> break; >> default: >> return false; >> -- ------------------ Dan Murphy ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v2 2/3] iio: bindings: Add TI afe4403 heart monitor documentation 2015-05-11 20:05 Heart Rate monitors v2 Dan Murphy 2015-05-11 20:05 ` [PATCH v2 1/3] iio: heart_monitors: Add an event for heart rate monitors Dan Murphy @ 2015-05-11 20:05 ` Dan Murphy 2015-05-17 12:51 ` Jonathan Cameron 2015-05-11 20:05 ` [PATCH v2 3/3] iio: health: Add TI afe4403 heart monitor Dan Murphy 2 siblings, 1 reply; 8+ messages in thread From: Dan Murphy @ 2015-05-11 20:05 UTC (permalink / raw) To: linux-iio; +Cc: jic23, Dan Murphy Add the TI afe4403 heart monitor device tree binding documentation. health directory created under iio. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- .../devicetree/bindings/iio/health/ti_afe4403.txt | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/health/ti_afe4403.txt diff --git a/Documentation/devicetree/bindings/iio/health/ti_afe4403.txt b/Documentation/devicetree/bindings/iio/health/ti_afe4403.txt new file mode 100644 index 0000000..b196b17 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/health/ti_afe4403.txt @@ -0,0 +1,26 @@ +* Texas Instruments - AFE4403 Heart rate and Pulse Oximeter + +The device consists of a low-noise receiver channel +with an integrated analog-to-digital converter (ADC), +an LED transmit section, and diagnostics for sensor and LED fault detection. + +Required properties: + - compatible: Must contain "ti,afe4403". + - ste-gpio: GPIO for the spi control line + - data-ready-gpio: GPIO interrupt when the afe4403 has data + - led-supply: Chip supply to the device + +Optional properties: + - reset-gpio: GPIO used to reset the device via HW + +Example: + +&heart_rate { + compatible = "ti,afe4403"; + ste-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; + data-ready-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + led-supply = <&vbat>; +}; + +Technical Datasheet: +http://www.ti.com/product/AFE4403/datasheet -- 1.9.1 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v2 2/3] iio: bindings: Add TI afe4403 heart monitor documentation 2015-05-11 20:05 ` [PATCH v2 2/3] iio: bindings: Add TI afe4403 heart monitor documentation Dan Murphy @ 2015-05-17 12:51 ` Jonathan Cameron 0 siblings, 0 replies; 8+ messages in thread From: Jonathan Cameron @ 2015-05-17 12:51 UTC (permalink / raw) To: Dan Murphy, linux-iio On 11/05/15 21:05, Dan Murphy wrote: > Add the TI afe4403 heart monitor device tree > binding documentation. health directory > created under iio. > > Signed-off-by: Dan Murphy <dmurphy@ti.com> A few bits popped up when reviewing the driver. > --- > .../devicetree/bindings/iio/health/ti_afe4403.txt | 26 ++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/health/ti_afe4403.txt > > diff --git a/Documentation/devicetree/bindings/iio/health/ti_afe4403.txt b/Documentation/devicetree/bindings/iio/health/ti_afe4403.txt > new file mode 100644 > index 0000000..b196b17 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/health/ti_afe4403.txt > @@ -0,0 +1,26 @@ > +* Texas Instruments - AFE4403 Heart rate and Pulse Oximeter > + > +The device consists of a low-noise receiver channel > +with an integrated analog-to-digital converter (ADC), > +an LED transmit section, and diagnostics for sensor and LED fault detection. > + > +Required properties: > + - compatible: Must contain "ti,afe4403". > + - ste-gpio: GPIO for the spi control line > + - data-ready-gpio: GPIO interrupt when the afe4403 has data This is an interrupt as far as the device is concerned, not a gpio. hence the binding should reflect that. Not all interrupt capable devices are even capable of reading out their current value, let alone acting as outputs as well! > + - led-supply: Chip supply to the device > + > +Optional properties: > + - reset-gpio: GPIO used to reset the device via HW > + > +Example: > + > +&heart_rate { > + compatible = "ti,afe4403"; > + ste-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; > + data-ready-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; > + led-supply = <&vbat>; > +}; > + > +Technical Datasheet: > +http://www.ti.com/product/AFE4403/datasheet > ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v2 3/3] iio: health: Add TI afe4403 heart monitor 2015-05-11 20:05 Heart Rate monitors v2 Dan Murphy 2015-05-11 20:05 ` [PATCH v2 1/3] iio: heart_monitors: Add an event for heart rate monitors Dan Murphy 2015-05-11 20:05 ` [PATCH v2 2/3] iio: bindings: Add TI afe4403 heart monitor documentation Dan Murphy @ 2015-05-11 20:05 ` Dan Murphy 2015-05-17 12:50 ` Jonathan Cameron 2 siblings, 1 reply; 8+ messages in thread From: Dan Murphy @ 2015-05-11 20:05 UTC (permalink / raw) To: linux-iio; +Cc: jic23, Dan Murphy Add the TI afe4403 heart rate monitor. This device detects reflected LED wave length fluctuations and presents an ADC value to the user space to be converted to a heart rate. Data sheet located here: http://www.ti.com/product/AFE4403/datasheet Signed-off-by: Dan Murphy <dmurphy@ti.com> --- .../ABI/testing/sysfs-bus-iio-health-afe4403 | 60 ++ .../devicetree/bindings/iio/health/ti_afe4403.txt | 2 - drivers/iio/Kconfig | 1 + drivers/iio/Makefile | 1 + drivers/iio/health/Kconfig | 21 + drivers/iio/health/Makefile | 6 + drivers/iio/health/afe4403.c | 855 +++++++++++++++++++++ drivers/iio/health/afe440x.h | 116 +++ 8 files changed, 1060 insertions(+), 2 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-health-afe4403 create mode 100644 drivers/iio/health/Kconfig create mode 100644 drivers/iio/health/Makefile create mode 100644 drivers/iio/health/afe4403.c create mode 100644 drivers/iio/health/afe440x.h diff --git a/Documentation/ABI/testing/sysfs-bus-iio-health-afe4403 b/Documentation/ABI/testing/sysfs-bus-iio-health-afe4403 new file mode 100644 index 0000000..041b1ad --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-health-afe4403 @@ -0,0 +1,60 @@ +What: /sys/bus/iio/devices/iio:deviceX/out_tia_gain_cap + /sys/bus/iio/devices/iio:deviceX/out_tia_gain_res + /sys/bus/iio/devices/iio:deviceX/out_tia_amb_gain_res + /sys/bus/iio/devices/iio:deviceX/out_tia_amb_gain_res +Date: April 2015 +KernelVersion: +Contact: Dan Murphy <dmurphy@ti.com> +Description: + Get and set the resistance and the capcitance settings for the + Transimpedance Amplifier and Ambient Gain. + Resistance setting is from 0 -> 7 + Capcitance setting is from 0 -> 15 + +What: /sys/bus/iio/devices/iio:deviceX/out_enable_tia_separate_gains +Date: April 2015 +KernelVersion: +Contact: Dan Murphy <dmurphy@ti.com> +Description: + Get and set the . + +What: /sys/bus/iio/devices/iio:deviceX/out_enable_measurement +Date: April 2015 +KernelVersion: +Contact: Dan Murphy <dmurphy@ti.com> +Description: + Get and set the measurement to being enabled or disabled. + This will power down the internals of the AFE and not + generate any additional interrupts. + +What: /sys/bus/iio/devices/iio:deviceX/out_led_cntrl_ledY +Date: April 2015 +KernelVersion: +Contact: Dan Murphy <dmurphy@ti.com> +Description: + Get and set the LED current for the specified LED. + Y - Is the specific LED to set. + Values range from 0 -> 63. Current is calculated by + current = value * 0.8 + +What: /sys/.../events/in_intensity0_led1val_mag_value + /sys/.../events/in_intensity1_aled1val_mag_value + /sys/.../events/in_intensity2_led2val_mag_value + /sys/.../events/in_intensity3_aled2val_mag_value +Date: April 2015 +KernelVersion: +Contact: Dan Murphy <dmurphy@ti.com> +Description: + Event generated when the analog front end completed it's + measurement and has led values available. The values are + expressed in 24-bit twos complement for the specified LEDs. + +What: /sys/.../events/in_intensity4_led2_aled2_mag_value + /sys/.../events/in_intensity5_led1_aled1_mag_value +Date: April 2015 +KernelVersion: +Contact: Dan Murphy <dmurphy@ti.com> +Description: + Event generated when the analog front end completed it's + measurement and has led values available. The values are + expressed in 24-bit twos complement for the specified LEDs. diff --git a/Documentation/devicetree/bindings/iio/health/ti_afe4403.txt b/Documentation/devicetree/bindings/iio/health/ti_afe4403.txt index b196b17..e6cc14e 100644 --- a/Documentation/devicetree/bindings/iio/health/ti_afe4403.txt +++ b/Documentation/devicetree/bindings/iio/health/ti_afe4403.txt @@ -6,7 +6,6 @@ an LED transmit section, and diagnostics for sensor and LED fault detection. Required properties: - compatible: Must contain "ti,afe4403". - - ste-gpio: GPIO for the spi control line - data-ready-gpio: GPIO interrupt when the afe4403 has data - led-supply: Chip supply to the device @@ -17,7 +16,6 @@ Example: &heart_rate { compatible = "ti,afe4403"; - ste-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; data-ready-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; led-supply = <&vbat>; }; diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig index 4011eff..53e1892 100644 --- a/drivers/iio/Kconfig +++ b/drivers/iio/Kconfig @@ -65,6 +65,7 @@ source "drivers/iio/common/Kconfig" source "drivers/iio/dac/Kconfig" source "drivers/iio/frequency/Kconfig" source "drivers/iio/gyro/Kconfig" +source "drivers/iio/health/Kconfig" source "drivers/iio/humidity/Kconfig" source "drivers/iio/imu/Kconfig" source "drivers/iio/light/Kconfig" diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile index 698afc2..d350cb3 100644 --- a/drivers/iio/Makefile +++ b/drivers/iio/Makefile @@ -18,6 +18,7 @@ obj-y += common/ obj-y += dac/ obj-y += gyro/ obj-y += frequency/ +obj-y += health/ obj-y += humidity/ obj-y += imu/ obj-y += light/ diff --git a/drivers/iio/health/Kconfig b/drivers/iio/health/Kconfig new file mode 100644 index 0000000..24aae7c --- /dev/null +++ b/drivers/iio/health/Kconfig @@ -0,0 +1,21 @@ +# +# Health drivers +# +# When adding new entries keep the list in alphabetical order + +menu "Health" + +menu "Heart Rate Monitors" +config AFE4403 + tristate "TI AFE4403 Heart Rate Monitor" + depends on SPI_MASTER + select IIO_BUFFER + help + Say yes to choose the Texas Instruments AFE4403 + heart rate monitor and low-cost pulse oximeter. + + To compile this driver as a module, choose M here: the + module will be called afe4403 heart rate monitor and + low-cost pulse oximeter. +endmenu +endmenu diff --git a/drivers/iio/health/Makefile b/drivers/iio/health/Makefile new file mode 100644 index 0000000..77cc5c5 --- /dev/null +++ b/drivers/iio/health/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for IIO Heart Rate Monitor drivers +# + +# When adding new entries keep the list in alphabetical order +obj-$(CONFIG_AFE4403) += afe4403.o diff --git a/drivers/iio/health/afe4403.c b/drivers/iio/health/afe4403.c new file mode 100644 index 0000000..8e5bb3d --- /dev/null +++ b/drivers/iio/health/afe4403.c @@ -0,0 +1,855 @@ +/* + * AFE4403 Heart Rate Monitors and Low-Cost Pulse Oximeters + * + * Author: Dan Murphy <dmurphy@ti.com> + * + * Copyright: (C) 2015 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_gpio.h> +#include <linux/spi/spi.h> +#include <linux/slab.h> +#include <linux/sysfs.h> +#include <linux/regulator/consumer.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/events.h> + +#include "afe440x.h" + +static DEFINE_MUTEX(afe4403_mutex); + +/* AFE4403 LEDCNTRL specific bits */ +#define AFE4403_LEDCNTRL_LED_RANGE_MASK 0x30000 +#define AFE4403_LEDCNTRL_LED_RANGE_SHIFT 16 +#define AFE4403_LEDCNTRL_RANGE_TX_OFF 0x30000 +#define AFE4403_LEDCNTRL_RANGE_TX_FULL (1 << AFE4403_LEDCNTRL_LED_RANGE_SHIFT) +#define AFE4403_LEDCNTRL_RANGE_TX_HALF (2 << AFE4403_LEDCNTRL_LED_RANGE_SHIFT) + +/* AFE4403 CONTROL 2 specific bits */ +#define AFE4403_CNTRL_2_PWR_DWN_TX BIT(2) +#define AFE4403_CNTRL_2_EN_SLOW_DIAG BIT(8) +#define AFE4403_CNTRL_2_DIAG_OUT_TRI BIT(10) +#define AFE4403_CNTRL_2_TX_BRDG_MOD BIT(11) +#define AFE4403_CNTRL_2_TX_REF0 BIT(17) +#define AFE4403_CNTRL_2_TX_REF1 BIT(18) + +/* AFE4403 CONTROL 3 specific bits */ +#define AFE4403_CNTRL3_CLK_DIV_2 0x0 +#define AFE4403_CNTRL3_CLK_DIV_4 0x2 +#define AFE4403_CNTRL3_CLK_DIV_6 0x3 +#define AFE4403_CNTRL3_CLK_DIV_8 0x4 +#define AFE4403_CNTRL3_CLK_DIV_12 0x5 +#define AFE4403_CNTRL3_CLK_DIV_1 0x7 + +/* AFE4403 TIA_GAIN specific bits */ +#define AFE4403_TIA_GAIN_CAP_5_P 0x0 +#define AFE4403_TIA_GAIN_CAP_10_P 0x1 +#define AFE4403_TIA_GAIN_CAP_20_P 0x2 +#define AFE4403_TIA_GAIN_CAP_30_P 0x3 +#define AFE4403_TIA_GAIN_CAP_55_P 0x8 +#define AFE4403_TIA_GAIN_CAP_155_P 0x10 + +/** + * struct afe4403_data + * @indio_dev - IIO device structure + * @spi - SPI device pointer the driver is attached to + * @mutex - Read/Write mutex + * @regulator - Pointer to the regulator for the IC + * @data_gpio - Interrupt GPIO when AFE data is ready + * @reset_gpio - Hard wire GPIO reset line + * @timestamp - Timestamp of the IRQ event + * @state - Current state of the IC. + * @irq - AFE4403 interrupt number +**/ +struct afe4403_data { + struct iio_dev *indio_dev; + struct spi_device *spi; + struct mutex mutex; + struct regmap *regmap; + struct regulator *regulator; + struct gpio_desc *data_gpio; + struct gpio_desc *reset_gpio; + int64_t timestamp; + bool state; + int irq; +}; + +enum afe4403_reg_id { + LED1VAL, + ALED1VAL, + LED2VAL, + ALED2VAL, + LED2_ALED2VAL, + LED1_ALED1VAL, +}; + +struct afe4403_reg_cntrl_attribute { + struct device_attribute dev_attr; + int val1; +}; + +static inline struct afe4403_reg_cntrl_attribute * +to_afe4403_reg_cntrl_attr(struct device_attribute *attr) +{ + return container_of(attr, struct afe4403_reg_cntrl_attribute, dev_attr); +} + +static struct afe440x_chan_map afe4403_map[] = { + { LED1VAL, AFE440X_LED1VAL }, + { ALED1VAL, AFE440X_ALED1VAL }, + { LED2VAL, AFE440X_LED2VAL }, + { ALED2VAL, AFE440X_ALED2VAL }, + { LED2_ALED2VAL, AFE440X_LED2_ALED2VAL }, + { LED1_ALED1VAL, AFE440X_LED1_ALED1VAL }, +}; + +static const struct iio_event_spec afe4403_event = { + .type = IIO_EV_TYPE_MAG, + .dir = IIO_EV_DIR_NONE, + .mask_separate = BIT(IIO_EV_INFO_VALUE), +}; + +#define AFE4403_READ_CHAN(index, name) { \ + .type = IIO_INTENSITY, \ + .indexed = 1, \ + .channel = index, \ + .extend_name = name, \ + .scan_index = index, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 24, \ + .storagebits = 32, \ + .endianness = IIO_BE \ + }, \ + .event_spec = &afe4403_event, \ + .num_event_specs = 1, \ +} + +static const struct iio_chan_spec afe4403_channels[] = { + /* Read only values from the IC */ + AFE4403_READ_CHAN(LED1VAL, "led1val"), + AFE4403_READ_CHAN(ALED1VAL, "aled1val"), + AFE4403_READ_CHAN(LED2VAL, "led2val"), + AFE4403_READ_CHAN(ALED2VAL, "aled2val"), + AFE4403_READ_CHAN(LED2_ALED2VAL, "led2_aled2"), + AFE4403_READ_CHAN(LED1_ALED1VAL, "led1_aled1"), +}; + + +static int afe4403_read(struct afe4403_data *afe4403, u8 reg, + unsigned int *data) +{ + int ret; + + mutex_lock(&afe4403_mutex); + + ret = spi_write_then_read(afe4403->spi, (u8 *)®, 1, (u8 *)data, 3); + + mutex_unlock(&afe4403_mutex); + return ret; +}; + +static int afe4403_write(struct afe4403_data *afe4403, u8 reg, + unsigned int data) +{ + int ret; + u8 tx[4] = {0x0, 0x0, 0x0, 0x0}; + + mutex_lock(&afe4403_mutex); + + /* Enable write to the device */ + tx[0] = AFE440X_CONTROL0; + tx[3] = AFE440X_WRITE; + ret = spi_write(afe4403->spi, (u8 *)tx, 4); + if (ret) + goto out; + + tx[0] = reg; + tx[1] = (data & 0xff0000) >> 16; + tx[2] = (data & 0x00ff00) >> 8; + tx[3] = data & 0xff; + ret = spi_write(afe4403->spi, (u8 *)tx, 4); + if (ret) + goto out; + + /* Re-Enable reading from the device */ + tx[0] = AFE440X_CONTROL0; + tx[1] = 0x0; + tx[2] = 0x0; + tx[3] = AFE440X_READ; + ret = spi_write(afe4403->spi, (u8 *)tx, 4); + +out: + mutex_unlock(&afe4403_mutex); + return ret; +}; + +static int afe4403_read_event_value(struct iio_dev *iio, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, + int *val, int *val2) +{ + struct afe4403_data *afe4403 = iio_priv(iio); + int ret; + + ret = afe4403_read(afe4403, afe4403_map[chan->channel].reg, val); + if (ret) + goto done; + + *val2 = 0; + ret = IIO_VAL_INT; +done: + return ret; +} + +static ssize_t show_tia_separate_gains(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct afe4403_data *afe4403 = iio_priv(indio_dev); + unsigned int gain_val; + int ret; + + ret = afe4403_read(afe4403, AFE440X_TIAGAIN, &gain_val); + if (ret) + return ret; + + return scnprintf(buf, PAGE_SIZE, "%u\n", + ((gain_val & AFE440X_TIA_GAIN_SEP_GAIN_MASK) >> + AFE440X_TIA_GAIN_SEP_GAIN_SHIFT)); +} + +static int store_tia_separate_gains(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct afe4403_data *afe4403 = iio_priv(indio_dev); + unsigned state; + unsigned int control_val; + int ret; + + if (kstrtoint(buf, 0, &state)) + return -EINVAL; + + ret = afe4403_read(afe4403, AFE440X_TIAGAIN, &control_val); + if (ret) + return ret; + + if (state) + control_val |= 1 << AFE440X_TIA_GAIN_SEP_GAIN_SHIFT; + else + control_val &= ~AFE440X_TIA_GAIN_SEP_GAIN_MASK; + + ret = afe4403_write(afe4403, AFE440X_TIAGAIN, control_val); + if (ret) + return ret; + + return len; +} + +static ssize_t show_measurement(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct afe4403_data *afe4403 = iio_priv(indio_dev); + unsigned int control_val; + int ret; + + ret = afe4403_read(afe4403, AFE440X_CONTROL2, &control_val); + if (ret) + return ret; + + return scnprintf(buf, PAGE_SIZE, "%u\n", + !(control_val & AFE440X_CNTRL_2_PWR_DWN)); +} + +static int store_measurement(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct afe4403_data *afe4403 = iio_priv(indio_dev); + unsigned int control_val; + unsigned state; + int ret; + + if (kstrtoint(buf, 0, &state)) + return -EINVAL; + + ret = afe4403_read(afe4403, AFE440X_CONTROL2, &control_val); + if (ret) + return ret; + + if (state) + control_val &= ~AFE440X_CNTRL_2_PWR_DWN; + else + control_val |= AFE440X_CNTRL_2_PWR_DWN; + + ret = afe4403_write(afe4403, AFE440X_CONTROL2, control_val); + if (ret) + return ret; + + afe4403->state = (control_val & AFE440X_CNTRL_2_PWR_DWN); + + return len; +} + +static int set_tia_gain_cap(struct afe4403_data *afe4403, u8 reg, + int data) +{ + int ret; + int tia_gain; + + ret = afe4403_read(afe4403, reg, &tia_gain); + if (ret) + return ret; + + tia_gain &= ~AFE440X_TIA_GAIN_CAP_MASK; + tia_gain |= (data << AFE440X_TIA_GAIN_CAP_SHIFT) & AFE440X_TIA_GAIN_CAP_MASK; + + return afe4403_write(afe4403, reg, tia_gain); +} + +static int set_tia_gain_res(struct afe4403_data *afe4403, u8 reg, + int data) +{ + int ret; + int tia_gain; + + ret = afe4403_read(afe4403, reg, &tia_gain); + if (ret) + return ret; + + tia_gain &= ~AFE440X_TIA_GAIN_RES_MASK; + tia_gain |= data; + + return afe4403_write(afe4403, reg, tia_gain); +} + +static ssize_t store_tia_amb_gain_cap(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct afe4403_data *afe4403 = iio_priv(indio_dev); + unsigned val; + int ret; + + if (kstrtoint(buf, 0, &val)) + return -EINVAL; + + ret = set_tia_gain_cap(afe4403, AFE440X_TIA_AMB_GAIN, val); + if (ret) + return ret; + + return len; +} + +static ssize_t show_tia_amb_gain_cap(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct afe4403_data *afe4403 = iio_priv(indio_dev); + int ret; + int gain; + + ret = afe4403_read(afe4403, AFE440X_TIA_AMB_GAIN, &gain); + if (ret) + return ret; + + + return scnprintf(buf, PAGE_SIZE, "%u\n", + (gain & AFE440X_TIA_GAIN_CAP_MASK) >> AFE440X_TIA_GAIN_CAP_SHIFT); +} + +static ssize_t store_tia_amb_gain_res(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct afe4403_data *afe4403 = iio_priv(indio_dev); + unsigned val; + int ret; + + if (kstrtoint(buf, 0, &val)) + return -EINVAL; + + ret = set_tia_gain_res(afe4403, AFE440X_TIA_AMB_GAIN, val); + if (ret) + return ret; + + return len; +} + +static ssize_t show_tia_amb_gain_res(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct afe4403_data *afe4403 = iio_priv(indio_dev); + int ret; + int gain; + + ret = afe4403_read(afe4403, AFE440X_TIA_AMB_GAIN, &gain); + if (ret) + return ret; + + + return scnprintf(buf, PAGE_SIZE, "%u\n", + (gain & AFE440X_TIA_GAIN_RES_MASK)); +} + +static ssize_t store_tia_gain_res(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct afe4403_data *afe4403 = iio_priv(indio_dev); + unsigned val; + int ret; + + if (kstrtoint(buf, 0, &val)) + return -EINVAL; + + ret = set_tia_gain_res(afe4403, AFE440X_TIAGAIN, val); + if (ret) + return ret; + + return len; +} + +static ssize_t show_tia_gain_res(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct afe4403_data *afe4403 = iio_priv(indio_dev); + int ret; + int gain; + + ret = afe4403_read(afe4403, AFE440X_TIAGAIN, &gain); + if (ret) + return ret; + + return scnprintf(buf, PAGE_SIZE, "%u\n", + (gain & AFE440X_TIA_GAIN_RES_MASK)); +} + +static ssize_t store_tia_gain_cap(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct afe4403_data *afe4403 = iio_priv(indio_dev); + unsigned val; + int ret; + + if (kstrtoint(buf, 0, &val)) + return -EINVAL; + + ret = set_tia_gain_cap(afe4403, AFE440X_TIAGAIN, val); + if (ret) + return ret; + + return len; +} + +static ssize_t show_tia_gain_cap(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct afe4403_data *afe4403 = iio_priv(indio_dev); + int ret; + int gain; + + ret = afe4403_read(afe4403, AFE440X_TIAGAIN, &gain); + if (ret) + return ret; + + return scnprintf(buf, PAGE_SIZE, "%u\n", + (gain & AFE440X_TIA_GAIN_CAP_MASK) >> AFE440X_TIA_GAIN_CAP_SHIFT); +} + +static ssize_t show_led_cntrl(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct afe4403_data *afe4403 = iio_priv(indio_dev); + struct afe4403_reg_cntrl_attribute *cntrl_attr = to_afe4403_reg_cntrl_attr(attr); + int ret; + int led_shift, led_reg_val, shifted_val; + + ret = afe4403_read(afe4403, AFE440X_LEDCNTRL, &led_reg_val); + if (ret) + return ret; + + /* Shift this a total of 6 bits for the LED number */ + led_shift = ((cntrl_attr->val1 - 1) * AFE440X_LED_CNTRL_LED_SHIFT); + shifted_val = (AFE440X_LED_CNTRL_LED_MASK << led_shift); + led_reg_val &= shifted_val; + + return scnprintf(buf, PAGE_SIZE, "%u\n", (led_reg_val >> led_shift)); +} + +static ssize_t store_led_cntrl(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct afe4403_data *afe4403 = iio_priv(indio_dev); + struct afe4403_reg_cntrl_attribute *cntrl_attr = to_afe4403_reg_cntrl_attr(attr); + unsigned val; + int ret; + int led_shift, led_reg_val, shifted_val; + + if (kstrtoint(buf, 0, &val)) + return -EINVAL; + + ret = afe4403_read(afe4403, AFE440X_LEDCNTRL, &led_reg_val); + if (ret) + return ret; + + /* Shift this a total of 6 bits for the LED number */ + led_shift = ((cntrl_attr->val1 - 1) * AFE440X_LED_CNTRL_LED_SHIFT); + shifted_val = (AFE440X_LED_CNTRL_LED_MASK << led_shift); + led_reg_val &= ~shifted_val; + led_reg_val |= (val << led_shift); + + ret = afe4403_write(afe4403, AFE440X_LEDCNTRL, val << led_shift); + if (ret) + return ret; + + return len; +} + +#define ENABLE_ATTR_RW(_name) \ + DEVICE_ATTR(out_enable_##_name, S_IRUGO | S_IWUSR, \ + show_##_name, store_##_name) + +static ENABLE_ATTR_RW(measurement); + +#define REGISTER_CNTRL_ATTR(_name, _mode, _show, _store, _val1) \ + { .dev_attr = __ATTR(_name, _mode, _show, _store), \ + .val1 = _val1 } + +#define AFE4403_REG_ATTR(_name, _mode, _show, _store, _val1) \ + struct afe4403_reg_cntrl_attribute afe4403_attr_##_name = \ + REGISTER_CNTRL_ATTR(_name, _mode, _show, _store, _val1) + +#define TIA_GAIN_RW(_name) \ + AFE4403_REG_ATTR(out_##_name, S_IRUGO | S_IWUSR, \ + show_##_name, store_##_name, 0) + +static ENABLE_ATTR_RW(tia_separate_gains); +static TIA_GAIN_RW(tia_gain_res); +static TIA_GAIN_RW(tia_gain_cap); +static TIA_GAIN_RW(tia_amb_gain_res); +static TIA_GAIN_RW(tia_amb_gain_cap); + +#define LED_ATTR_RW(_name, _lednum) \ + AFE4403_REG_ATTR(out_##_name##_led##_lednum, S_IRUGO | S_IWUSR, \ + show_##_name, store_##_name, _lednum) + +static LED_ATTR_RW(led_cntrl, 1); +static LED_ATTR_RW(led_cntrl, 2); + +static struct attribute *afe4403_attributes[] = { + &dev_attr_out_enable_measurement.attr, + &dev_attr_out_enable_tia_separate_gains.attr, + &afe4403_attr_out_led_cntrl_led1.dev_attr.attr, + &afe4403_attr_out_led_cntrl_led2.dev_attr.attr, + &afe4403_attr_out_tia_gain_res.dev_attr.attr, + &afe4403_attr_out_tia_gain_cap.dev_attr.attr, + &afe4403_attr_out_tia_amb_gain_res.dev_attr.attr, + &afe4403_attr_out_tia_amb_gain_cap.dev_attr.attr, + NULL +}; + +static struct attribute_group afe4403_attribute_group = { + .attrs = afe4403_attributes +}; + +static const struct iio_info afe4403_iio_info = { + .attrs = &afe4403_attribute_group, + .read_event_value = &afe4403_read_event_value, + .driver_module = THIS_MODULE, +}; + +static irqreturn_t afe4403_event_handler(int irq, void *private) +{ + struct iio_dev *indio_dev = private; + struct afe4403_data *afe4403 = iio_priv(indio_dev); + + afe4403->timestamp = iio_get_time_ns(); + + iio_push_event(indio_dev, IIO_UNMOD_EVENT_CODE(IIO_HEARTRATE, + 0, + IIO_EV_TYPE_CHANGE, + IIO_EV_DIR_EITHER), + afe4403->timestamp); + + return IRQ_HANDLED; +} + +struct afe4403_reg { + uint8_t reg; + u32 value; +} afe4403_init_regs[] = { + { AFE440X_LED2STC, 0x000820}, + { AFE440X_LED2ENDC, 0x000f9e }, + { AFE440X_LED2LEDSTC, 0x0007d0 }, + { AFE440X_LED2LEDENDC, 0x000f9f }, + { AFE440X_ALED2STC, 0x000050 }, + { AFE440X_ALED2ENDC, 0x0007ce }, + { AFE440X_LED1STC, 0x00c350 }, + { AFE440X_LED1ENDC, 0x00c350 }, + { AFE440X_LED1LEDSTC, 0x00c350 }, + { AFE440X_LED1LEDENDC, 0x00c350 }, + { AFE440X_ALED1STC, 0x000ff0 }, + { AFE440X_ALED1ENDC, 0x00176e }, + { AFE440X_LED2CONVST, 0x001775 }, + { AFE440X_LED2CONVEND, 0x001f3f }, + { AFE440X_ALED2CONVST, 0x001f45 }, + { AFE440X_ALED2CONVEND, 0x00270f }, + { AFE440X_LED1CONVST, 0x002715 }, + { AFE440X_LED1CONVEND, 0x002edf }, + { AFE440X_ALED1CONVST, 0x002ee5 }, + { AFE440X_ALED1CONVEND, 0x0036af }, + { AFE440X_ADCRSTSTCT0, 0x001770 }, + { AFE440X_ADCRSTENDCT0, 0x001774 }, + { AFE440X_ADCRSTSTCT1, 0x001f40 }, + { AFE440X_ADCRSTENDCT1, 0x001f44 }, + { AFE440X_ADCRSTSTCT2, 0x002710 }, + { AFE440X_ADCRSTENDCT2, 0x002714 }, + { AFE440X_ADCRSTSTCT3, 0x002ee0 }, + { AFE440X_ADCRSTENDCT3, 0x002ee4 }, + { AFE440X_PRPCOUNT, 0x0009c3f }, + { AFE440X_CONTROL1, (AFE440X_CNTRL_1_TIMER_EN | 0x000007) }, + { AFE440X_TIAGAIN, (AFE440X_TIA_GAIN_SEP_GAIN_MASK | + AFE440X_TIA_GAIN_RES_1_M) }, + { AFE440X_TIA_AMB_GAIN, AFE440X_TIA_GAIN_RES_1_M }, + { AFE440X_LEDCNTRL, (AFE4403_LEDCNTRL_RANGE_TX_FULL | 0x0001414) }, + { AFE440X_CONTROL2, AFE4403_CNTRL_2_TX_REF0 }, +}; + +static int afe4403_init(struct afe4403_data *afe4403) +{ + int ret, i, reg_count; + + /* Hard reset the device needs to be held for 1ms per data sheet */ + if (afe4403->reset_gpio) { + gpiod_set_value(afe4403->reset_gpio, 0); + udelay(1000); + gpiod_set_value(afe4403->reset_gpio, 1); + } else { + /* Soft reset the device */ + ret = afe4403_write(afe4403, AFE440X_CONTROL0, + AFE440X_SW_RESET); + if (ret) + return ret; + } + + reg_count = ARRAY_SIZE(afe4403_init_regs); + for (i = 0; i < reg_count; i++) { + ret = afe4403_write(afe4403, afe4403_init_regs[i].reg, + afe4403_init_regs[i].value); + if (ret) + return ret; + } + + return ret; +}; + +static int afe4403_spi_probe(struct spi_device *spi) +{ + struct afe4403_data *afe4403; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*afe4403)); + if (indio_dev == NULL) { + dev_err(&spi->dev, "Failed to allocate iio device\n"); + return -ENOMEM; + } + + spi_set_drvdata(spi, indio_dev); + + afe4403 = iio_priv(indio_dev); + afe4403->spi = spi; + + indio_dev->dev.parent = &spi->dev; + indio_dev->name = "afe4403"; + indio_dev->info = &afe4403_iio_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = afe4403_channels; + indio_dev->num_channels = ARRAY_SIZE(afe4403_channels); + + afe4403->data_gpio = devm_gpiod_get(&spi->dev, "data-ready"); + if (IS_ERR(afe4403->data_gpio)) { + ret = PTR_ERR(afe4403->data_gpio); + if (ret != -ENOENT && ret != -ENOSYS) { + dev_err(&spi->dev, "Failed to allocate data_ready\n"); + return ret; + } + afe4403->data_gpio = NULL; + } else { + gpiod_direction_input(afe4403->data_gpio); + afe4403->irq = gpiod_to_irq(afe4403->data_gpio); + } + + afe4403->reset_gpio = devm_gpiod_get(&spi->dev, "reset"); + if (IS_ERR(afe4403->reset_gpio)) { + ret = PTR_ERR(afe4403->reset_gpio); + if (ret != -ENOENT && ret != -ENOSYS) { + dev_err(&spi->dev, "Failed to allocate reset gpio\n"); + return ret; + } + afe4403->reset_gpio = NULL; + } else { + gpiod_direction_output(afe4403->reset_gpio, 1); + } + + afe4403->regulator = devm_regulator_get(&spi->dev, "led"); + if (IS_ERR(afe4403->regulator)) { + ret = PTR_ERR(afe4403->regulator); + dev_err(&spi->dev, + "unable to get regulator, error: %d\n", ret); + return ret; + } + if (afe4403->irq > 0) { + ret = devm_request_threaded_irq(&spi->dev, afe4403->irq, + NULL, + afe4403_event_handler, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "afe4403 int", + indio_dev); + if (ret) { + dev_err(&spi->dev, "unable to request IRQ\n"); + goto probe_error; + } + } + + ret = iio_device_register(indio_dev); + if (ret < 0) + goto probe_error; + + ret = afe4403_init(afe4403); + if (ret) { + dev_err(&spi->dev, "Failed to init device\n"); + goto init_failure; + } + + return 0; + +init_failure: + iio_device_unregister(indio_dev); +probe_error: + return ret; +} + +static int afe4403_spi_remove(struct spi_device *spi) +{ + struct iio_dev *indio_dev = spi_get_drvdata(spi); + struct afe4403_data *afe4403 = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + + if (!IS_ERR(afe4403->regulator)) + regulator_disable(afe4403->regulator); + + return 0; +} + +static int __maybe_unused afe4403_suspend(struct device *dev) +{ + struct afe4403_data *afe4403 = dev_get_drvdata(dev); + int ret = 0; + + ret = afe4403_write(afe4403, AFE440X_CONTROL2, AFE440X_CNTRL_2_PWR_DWN); + if (ret) + goto out; + + ret = regulator_disable(afe4403->regulator); + if (ret) + dev_err(dev, "Failed to disable regulator\n"); + +out: + return ret; +} + +static int __maybe_unused afe4403_resume(struct device *dev) +{ + struct afe4403_data *afe4403 = dev_get_drvdata(dev); + int ret = 0; + + if (afe4403->state) { + ret = afe4403_write(afe4403, AFE440X_CONTROL2, + ~AFE440X_CNTRL_2_PWR_DWN); + if (ret) + goto out; + } + ret = regulator_enable(afe4403->regulator); + if (ret) + dev_err(dev, "Failed to disable regulator\n"); + +out: + return ret; +} + +static SIMPLE_DEV_PM_OPS(afe4403_pm_ops, afe4403_suspend, afe4403_resume); + +#if IS_ENABLED(CONFIG_OF) +static const struct of_device_id afe4403_of_match[] = { + { .compatible = "ti,afe4403", }, + {} +}; +MODULE_DEVICE_TABLE(of, afe4403_of_match); +#endif + +static const struct spi_device_id afe4403_id[] = { + {"afe4403", 0}, + {}, +}; +MODULE_DEVICE_TABLE(spi, afe4403_id); + +static struct spi_driver afe4403_spi_driver = { + .driver = { + .name = "afe4403", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(afe4403_of_match), + .pm = &afe4403_pm_ops, + }, + .probe = afe4403_spi_probe, + .remove = afe4403_spi_remove, + .id_table = afe4403_id, +}; +module_spi_driver(afe4403_spi_driver); + +MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>"); +MODULE_DESCRIPTION("TI AFE4403 Heart Rate and Pulse Oximeter"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/health/afe440x.h b/drivers/iio/health/afe440x.h new file mode 100644 index 0000000..c71a97a --- /dev/null +++ b/drivers/iio/health/afe440x.h @@ -0,0 +1,116 @@ +/* + * AFE440X Heart Rate Monitors and Low-Cost Pulse Oximeters + * Common registers and bit definitions. + * + * Author: Dan Murphy <dmurphy@ti.com> + * + * Copyright: (C) 2015 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#ifndef _AFE440X_H +#define _AFE440X_H + +#define AFE440X_CONTROL0 0x00 +#define AFE440X_LED2STC 0x01 +#define AFE440X_LED2ENDC 0x02 +#define AFE440X_LED1LEDSTC 0x03 +#define AFE440X_LED1LEDENDC 0x04 +#define AFE440X_ALED2STC 0x05 +#define AFE440X_ALED2ENDC 0x06 +#define AFE440X_LED1STC 0x07 +#define AFE440X_LED1ENDC 0x08 +#define AFE440X_LED2LEDSTC 0x09 +#define AFE440X_LED2LEDENDC 0x0a +#define AFE440X_ALED1STC 0x0b +#define AFE440X_ALED1ENDC 0x0c +#define AFE440X_LED2CONVST 0x0d +#define AFE440X_LED2CONVEND 0x0e +#define AFE440X_ALED2CONVST 0x0f +#define AFE440X_ALED2CONVEND 0x10 +#define AFE440X_LED1CONVST 0x11 +#define AFE440X_LED1CONVEND 0x12 +#define AFE440X_ALED1CONVST 0x13 +#define AFE440X_ALED1CONVEND 0x14 +#define AFE440X_ADCRSTSTCT0 0x15 +#define AFE440X_ADCRSTENDCT0 0x16 +#define AFE440X_ADCRSTSTCT1 0x17 +#define AFE440X_ADCRSTENDCT1 0x18 +#define AFE440X_ADCRSTSTCT2 0x19 +#define AFE440X_ADCRSTENDCT2 0x1a +#define AFE440X_ADCRSTSTCT3 0x1b +#define AFE440X_ADCRSTENDCT3 0x1c +#define AFE440X_PRPCOUNT 0x1d +#define AFE440X_CONTROL1 0x1e +#define AFE440X_SPARE1 0x1f +#define AFE440X_TIAGAIN 0x20 +#define AFE440X_TIA_AMB_GAIN 0x21 +#define AFE440X_LEDCNTRL 0x22 +#define AFE440X_CONTROL2 0x23 +#define AFE440X_SPARE2 0x24 +#define AFE440X_SPARE3 0x25 +#define AFE440X_SPARE4 0x26 +#define AFE440X_ALARM 0x29 +#define AFE440X_LED2VAL 0x2A +#define AFE440X_ALED2VAL 0x2B +#define AFE440X_LED1VAL 0x2C +#define AFE440X_ALED1VAL 0x2D +#define AFE440X_LED2_ALED2VAL 0x2E +#define AFE440X_LED1_ALED1VAL 0x2F +#define AFE440X_DIAG 0x30 +#define AFE440X_CONTROL3 0x31 +#define AFE440X_PDNCYCLESTC 0x32 +#define AFE440X_PDNCYCLEENDC 0x33 + +/* CONTROL_0 register */ +#define AFE440X_READ BIT(0) +#define AFE440X_WRITE 0x0 +#define AFE440X_SW_RESET BIT(3) + +/* CONTROL_1 register */ +#define AFE440X_CNTRL_1_TIMER_EN BIT(8) + +/* CONTROL_2 register */ +#define AFE440X_CNTRL_2_PWR_DWN BIT(0) +#define AFE440X_CNTRL_2_PWR_DWN_RX BIT(1) +#define AFE440X_CNTRL_2_DYNAMIC4 BIT(3) +#define AFE440X_CNTRL_2_DYNAMIC3 BIT(4) +#define AFE440X_CNTRL_2_OSC_EN BIT(9) +#define AFE440X_CNTRL_2_DYNAMIC2 BIT(14) +#define AFE440X_CNTRL_2_DYNAMIC1 BIT(20) + +/* LED_CNTRL register */ +#define AFE440X_LED_CNTRL_LED_MASK 0x3f +#define AFE440X_LED_CNTRL_LED_SHIFT 6 + +/* TIA_GAIN and TIA_AMB_GAIN Register */ +#define AFE440X_TIA_GAIN_RES_MASK 0x7 +#define AFE440X_TIA_GAIN_CAP_MASK 0x38 +#define AFE440X_TIA_GAIN_CAP_SHIFT 3 +#define AFE440X_TIA_GAIN_SEP_GAIN_SHIFT 0xf +#define AFE440X_TIA_GAIN_SEP_GAIN_MASK 0x8000 + +/* TIA_GAIN Register */ +#define AFE440X_TIA_GAIN_RES_500_K 0x0 +#define AFE440X_TIA_GAIN_RES_250_K 0x1 +#define AFE440X_TIA_GAIN_RES_100_K 0x2 +#define AFE440X_TIA_GAIN_RES_50_K 0x3 +#define AFE440X_TIA_GAIN_RES_25_K 0x4 +#define AFE440X_TIA_GAIN_RES_10_K 0x5 +#define AFE440X_TIA_GAIN_RES_1_M 0x6 + + +struct afe440x_chan_map { + int channel; + unsigned char reg; +}; + +#endif -- 1.9.1 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v2 3/3] iio: health: Add TI afe4403 heart monitor 2015-05-11 20:05 ` [PATCH v2 3/3] iio: health: Add TI afe4403 heart monitor Dan Murphy @ 2015-05-17 12:50 ` Jonathan Cameron 0 siblings, 0 replies; 8+ messages in thread From: Jonathan Cameron @ 2015-05-17 12:50 UTC (permalink / raw) To: Dan Murphy, linux-iio On 11/05/15 21:05, Dan Murphy wrote: > Add the TI afe4403 heart rate monitor. > This device detects reflected LED > wave length fluctuations and presents an ADC > value to the user space to be converted to a > heart rate. > > Data sheet located here: > http://www.ti.com/product/AFE4403/datasheet > > Signed-off-by: Dan Murphy <dmurphy@ti.com> Hi Dan, There are a few code issues I've comment on inline. The ABI is going to prove more challenging. This is a complex beast with a lot of 'special purpose' features that we don't support well. I've made a few suggestions inline. Would you mind pulling all the ABI docs out into a separate patch? That way I can try and pull a few more reviewers into at least looking at that even if they haven't got time to read through the whole driver. Anyhow, it's improving but we aren't there yet! Jonathan > --- > .../ABI/testing/sysfs-bus-iio-health-afe4403 | 60 ++ > .../devicetree/bindings/iio/health/ti_afe4403.txt | 2 - > drivers/iio/Kconfig | 1 + > drivers/iio/Makefile | 1 + > drivers/iio/health/Kconfig | 21 + > drivers/iio/health/Makefile | 6 + > drivers/iio/health/afe4403.c | 855 +++++++++++++++++++++ > drivers/iio/health/afe440x.h | 116 +++ > 8 files changed, 1060 insertions(+), 2 deletions(-) > create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-health-afe4403 > create mode 100644 drivers/iio/health/Kconfig > create mode 100644 drivers/iio/health/Makefile > create mode 100644 drivers/iio/health/afe4403.c > create mode 100644 drivers/iio/health/afe440x.h > > diff --git a/Documentation/ABI/testing/sysfs-bus-iio-health-afe4403 b/Documentation/ABI/testing/sysfs-bus-iio-health-afe4403 > new file mode 100644 > index 0000000..041b1ad > --- /dev/null > +++ b/Documentation/ABI/testing/sysfs-bus-iio-health-afe4403 > @@ -0,0 +1,60 @@ > +What: /sys/bus/iio/devices/iio:deviceX/out_tia_gain_cap > + /sys/bus/iio/devices/iio:deviceX/out_tia_gain_res > + /sys/bus/iio/devices/iio:deviceX/out_tia_amb_gain_res > + /sys/bus/iio/devices/iio:deviceX/out_tia_amb_gain_res > +Date: April 2015 > +KernelVersion: > +Contact: Dan Murphy <dmurphy@ti.com> > +Description: > + Get and set the resistance and the capcitance settings for the > + Transimpedance Amplifier and Ambient Gain. > + Resistance setting is from 0 -> 7 > + Capcitance setting is from 0 -> 15 More standard(ish) output channels? out_capacitanceY_tia_raw (preferablly with a _scale if it can be established). out_resistanceY_tia_raw (this one is new, but there are plenty of digital pots out there so we'll need it sooner or later. note the tia bit is done via extended_name. I see there is an ambient equivalent. you could use modifers for this. We actually have IIO_MOD_TEMP_AMBIENT. I wonder if we should make that more generic and drop the temp aspect. > + > +What: /sys/bus/iio/devices/iio:deviceX/out_enable_tia_separate_gains > +Date: April 2015 > +KernelVersion: > +Contact: Dan Murphy <dmurphy@ti.com> > +Description: > + Get and set the . Dan, just a little more detail needed on this one ;) > + > +What: /sys/bus/iio/devices/iio:deviceX/out_enable_measurement > +Date: April 2015 > +KernelVersion: > +Contact: Dan Murphy <dmurphy@ti.com> > +Description: > + Get and set the measurement to being enabled or disabled. > + This will power down the internals of the AFE and not > + generate any additional interrupts. So this is a power saving mode? Userspace only cares that the device is powered down, not specifically what is powered down (in all cases it can't produce data). I don't think this needs an explicit control as surely you want to be in the powered down state whenever nothing is being read? Basically can this be done automatically? > + > +What: /sys/bus/iio/devices/iio:deviceX/out_led_cntrl_ledY > +Date: April 2015 > +KernelVersion: > +Contact: Dan Murphy <dmurphy@ti.com> > +Description: > + Get and set the LED current for the specified LED. > + Y - Is the specific LED to set. > + Values range from 0 -> 63. Current is calculated by > + current = value * 0.8 An output current? Doesn't need new abi. out_currentX_led_raw and out_currentX_led_scale should do the job nicely. Technically we are just dealing with a current dac (or possibly even a a regulator if we are getting fussy). > + > +What: /sys/.../events/in_intensity0_led1val_mag_value > + /sys/.../events/in_intensity1_aled1val_mag_value > + /sys/.../events/in_intensity2_led2val_mag_value > + /sys/.../events/in_intensity3_aled2val_mag_value > +Date: April 2015 > +KernelVersion: > +Contact: Dan Murphy <dmurphy@ti.com> > +Description: > + Event generated when the analog front end completed it's > + measurement and has led values available. The values are > + expressed in 24-bit twos complement for the specified LEDs. > + > +What: /sys/.../events/in_intensity4_led2_aled2_mag_value > + /sys/.../events/in_intensity5_led1_aled1_mag_value > +Date: April 2015 > +KernelVersion: > +Contact: Dan Murphy <dmurphy@ti.com> > +Description: > + Event generated when the analog front end completed it's > + measurement and has led values available. The values are > + expressed in 24-bit twos complement for the specified LEDs. If you want to do data ready signals, implement the buffered output interface and use that in conjunction with a trigger. Events are for things like thresholds, not for this purpose. > diff --git a/Documentation/devicetree/bindings/iio/health/ti_afe4403.txt b/Documentation/devicetree/bindings/iio/health/ti_afe4403.txt > index b196b17..e6cc14e 100644 > --- a/Documentation/devicetree/bindings/iio/health/ti_afe4403.txt > +++ b/Documentation/devicetree/bindings/iio/health/ti_afe4403.txt > @@ -6,7 +6,6 @@ an LED transmit section, and diagnostics for sensor and LED fault detection. > > Required properties: > - compatible: Must contain "ti,afe4403". > - - ste-gpio: GPIO for the spi control line err, what is this doing in this patch? > - data-ready-gpio: GPIO interrupt when the afe4403 has data > - led-supply: Chip supply to the device > > @@ -17,7 +16,6 @@ Example: > > &heart_rate { > compatible = "ti,afe4403"; > - ste-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; > data-ready-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; > led-supply = <&vbat>; > }; > diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig > index 4011eff..53e1892 100644 > --- a/drivers/iio/Kconfig > +++ b/drivers/iio/Kconfig > @@ -65,6 +65,7 @@ source "drivers/iio/common/Kconfig" > source "drivers/iio/dac/Kconfig" > source "drivers/iio/frequency/Kconfig" > source "drivers/iio/gyro/Kconfig" > +source "drivers/iio/health/Kconfig" > source "drivers/iio/humidity/Kconfig" > source "drivers/iio/imu/Kconfig" > source "drivers/iio/light/Kconfig" > diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile > index 698afc2..d350cb3 100644 > --- a/drivers/iio/Makefile > +++ b/drivers/iio/Makefile > @@ -18,6 +18,7 @@ obj-y += common/ > obj-y += dac/ > obj-y += gyro/ > obj-y += frequency/ > +obj-y += health/ > obj-y += humidity/ > obj-y += imu/ > obj-y += light/ > diff --git a/drivers/iio/health/Kconfig b/drivers/iio/health/Kconfig > new file mode 100644 > index 0000000..24aae7c > --- /dev/null > +++ b/drivers/iio/health/Kconfig > @@ -0,0 +1,21 @@ > +# > +# Health drivers > +# > +# When adding new entries keep the list in alphabetical order > + > +menu "Health" > + > +menu "Heart Rate Monitors" > +config AFE4403 > + tristate "TI AFE4403 Heart Rate Monitor" > + depends on SPI_MASTER > + select IIO_BUFFER > + help > + Say yes to choose the Texas Instruments AFE4403 > + heart rate monitor and low-cost pulse oximeter. > + > + To compile this driver as a module, choose M here: the > + module will be called afe4403 heart rate monitor and > + low-cost pulse oximeter. > +endmenu > +endmenu > diff --git a/drivers/iio/health/Makefile b/drivers/iio/health/Makefile > new file mode 100644 > index 0000000..77cc5c5 > --- /dev/null > +++ b/drivers/iio/health/Makefile > @@ -0,0 +1,6 @@ > +# > +# Makefile for IIO Heart Rate Monitor drivers > +# > + > +# When adding new entries keep the list in alphabetical order > +obj-$(CONFIG_AFE4403) += afe4403.o > diff --git a/drivers/iio/health/afe4403.c b/drivers/iio/health/afe4403.c > new file mode 100644 > index 0000000..8e5bb3d > --- /dev/null > +++ b/drivers/iio/health/afe4403.c > @@ -0,0 +1,855 @@ > +/* > + * AFE4403 Heart Rate Monitors and Low-Cost Pulse Oximeters > + * > + * Author: Dan Murphy <dmurphy@ti.com> > + * > + * Copyright: (C) 2015 Texas Instruments, Inc. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, but > + * WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > + * General Public License for more details. > + */ > + > +#include <linux/device.h> > +#include <linux/delay.h> > +#include <linux/err.h> > +#include <linux/interrupt.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/of_gpio.h> > +#include <linux/spi/spi.h> > +#include <linux/slab.h> > +#include <linux/sysfs.h> > +#include <linux/regulator/consumer.h> > + > +#include <linux/iio/iio.h> > +#include <linux/iio/sysfs.h> > +#include <linux/iio/events.h> > + > +#include "afe440x.h" > + > +static DEFINE_MUTEX(afe4403_mutex); So you've just limited yourself to one instance of this device? Why? Just embed the mutex in your private structure. > + > +/* AFE4403 LEDCNTRL specific bits */ > +#define AFE4403_LEDCNTRL_LED_RANGE_MASK 0x30000 > +#define AFE4403_LEDCNTRL_LED_RANGE_SHIFT 16 > +#define AFE4403_LEDCNTRL_RANGE_TX_OFF 0x30000 > +#define AFE4403_LEDCNTRL_RANGE_TX_FULL (1 << AFE4403_LEDCNTRL_LED_RANGE_SHIFT) > +#define AFE4403_LEDCNTRL_RANGE_TX_HALF (2 << AFE4403_LEDCNTRL_LED_RANGE_SHIFT) > + > +/* AFE4403 CONTROL 2 specific bits */ > +#define AFE4403_CNTRL_2_PWR_DWN_TX BIT(2) > +#define AFE4403_CNTRL_2_EN_SLOW_DIAG BIT(8) > +#define AFE4403_CNTRL_2_DIAG_OUT_TRI BIT(10) > +#define AFE4403_CNTRL_2_TX_BRDG_MOD BIT(11) > +#define AFE4403_CNTRL_2_TX_REF0 BIT(17) > +#define AFE4403_CNTRL_2_TX_REF1 BIT(18) > + > +/* AFE4403 CONTROL 3 specific bits */ > +#define AFE4403_CNTRL3_CLK_DIV_2 0x0 > +#define AFE4403_CNTRL3_CLK_DIV_4 0x2 > +#define AFE4403_CNTRL3_CLK_DIV_6 0x3 > +#define AFE4403_CNTRL3_CLK_DIV_8 0x4 > +#define AFE4403_CNTRL3_CLK_DIV_12 0x5 > +#define AFE4403_CNTRL3_CLK_DIV_1 0x7 > + > +/* AFE4403 TIA_GAIN specific bits */ > +#define AFE4403_TIA_GAIN_CAP_5_P 0x0 > +#define AFE4403_TIA_GAIN_CAP_10_P 0x1 > +#define AFE4403_TIA_GAIN_CAP_20_P 0x2 > +#define AFE4403_TIA_GAIN_CAP_30_P 0x3 > +#define AFE4403_TIA_GAIN_CAP_55_P 0x8 > +#define AFE4403_TIA_GAIN_CAP_155_P 0x10 > + > +/** > + * struct afe4403_data > + * @indio_dev - IIO device structure > + * @spi - SPI device pointer the driver is attached to > + * @mutex - Read/Write mutex > + * @regulator - Pointer to the regulator for the IC > + * @data_gpio - Interrupt GPIO when AFE data is ready > + * @reset_gpio - Hard wire GPIO reset line > + * @timestamp - Timestamp of the IRQ event > + * @state - Current state of the IC. > + * @irq - AFE4403 interrupt number > +**/ > +struct afe4403_data { > + struct iio_dev *indio_dev; Don't have a pointer to the indio_dev in here. It almost always indicates a design issue. Curriously in this case, it's not even used. Which is better in someways than it it was being! > + struct spi_device *spi; > + struct mutex mutex; > + struct regmap *regmap; > + struct regulator *regulator; > + struct gpio_desc *data_gpio; > + struct gpio_desc *reset_gpio; > + int64_t timestamp; > + bool state; > + int irq; As commented in various places below, much of this structure doesn't belong here. > +}; > + > +enum afe4403_reg_id { > + LED1VAL, > + ALED1VAL, > + LED2VAL, > + ALED2VAL, > + LED2_ALED2VAL, > + LED1_ALED1VAL, > +}; > + > +struct afe4403_reg_cntrl_attribute { > + struct device_attribute dev_attr; > + int val1; > +}; > + > +static inline struct afe4403_reg_cntrl_attribute * > +to_afe4403_reg_cntrl_attr(struct device_attribute *attr) > +{ > + return container_of(attr, struct afe4403_reg_cntrl_attribute, dev_attr); > +} > + > +static struct afe440x_chan_map afe4403_map[] = { > + { LED1VAL, AFE440X_LED1VAL }, > + { ALED1VAL, AFE440X_ALED1VAL }, > + { LED2VAL, AFE440X_LED2VAL }, > + { ALED2VAL, AFE440X_ALED2VAL }, > + { LED2_ALED2VAL, AFE440X_LED2_ALED2VAL }, > + { LED1_ALED1VAL, AFE440X_LED1_ALED1VAL }, > +}; > + > +static const struct iio_event_spec afe4403_event = { > + .type = IIO_EV_TYPE_MAG, > + .dir = IIO_EV_DIR_NONE, > + .mask_separate = BIT(IIO_EV_INFO_VALUE), > +}; > + > +#define AFE4403_READ_CHAN(index, name) { \ > + .type = IIO_INTENSITY, \ > + .indexed = 1, \ > + .channel = index, \ > + .extend_name = name, \ Right now you don't support 'buffered' access so scan_index and scan_type shouldn't be here. > + .scan_index = index, \ > + .scan_type = { \ > + .sign = 'u', \ > + .realbits = 24, \ > + .storagebits = 32, \ > + .endianness = IIO_BE \ > + }, \ > + .event_spec = &afe4403_event, \ > + .num_event_specs = 1, \ > +} > + > +static const struct iio_chan_spec afe4403_channels[] = { > + /* Read only values from the IC */ > + AFE4403_READ_CHAN(LED1VAL, "led1val"), Hmm. These are all non standard enough the resulting abi needs documenting. Does the val add anything to any of these? If we were to use modifiers for the ambient aspect then you could have something like. in_intensity0_ambient_raw in_intensity0_transmission_raw (or something along those lines). in_intensity1_ambient_raw in_intensity1_transmission_raw It's a bit uggly and non standard way of grouping channels but it does indicate that they are in some sense measuring the same channel. The use of modifiers to indicate a forced state is a bit uggly, but we already sort of do this with thermopiles where we have a reference channel on a known target and an object measurement. > + AFE4403_READ_CHAN(ALED1VAL, "aled1val"), > + AFE4403_READ_CHAN(LED2VAL, "led2val"), > + AFE4403_READ_CHAN(ALED2VAL, "aled2val"), The next two are differential channels. We have a well definited interface for those. I guess the issue is that right now we only have one extended_name field. I'd have no objection to allowing for two in the case of differential channels. right now we don't have any differential channels with extended names anyway so we can change this however we like. Perhaps we could have in_intensity0_aled2-intensity1_aled2_raw and similar by placing the two extended names appropriately? > + AFE4403_READ_CHAN(LED2_ALED2VAL, "led2_aled2"), > + AFE4403_READ_CHAN(LED1_ALED1VAL, "led1_aled1"), > +}; > + > + Hmm. A fairly minimalist wrapper, is spi_write_then_read not guaranteed to be atomic?. I just divide down a fair way and concluded that it depends on whether the spi controllers have atomic handling of transfers. > +static int afe4403_read(struct afe4403_data *afe4403, u8 reg, > + unsigned int *data) > +{ > + int ret; > + > + mutex_lock(&afe4403_mutex); > + > + ret = spi_write_then_read(afe4403->spi, (u8 *)®, 1, (u8 *)data, 3); > + > + mutex_unlock(&afe4403_mutex); blank line here. > + return ret; > +}; > + > +static int afe4403_write(struct afe4403_data *afe4403, u8 reg, > + unsigned int data) > +{ > + int ret; > + u8 tx[4] = {0x0, 0x0, 0x0, 0x0}; > + > + mutex_lock(&afe4403_mutex); > + > + /* Enable write to the device */ > + tx[0] = AFE440X_CONTROL0; > + tx[3] = AFE440X_WRITE; Just put these in above instead of 0s > + ret = spi_write(afe4403->spi, (u8 *)tx, 4); Shouldn't need the type cast to u8 *. > + if (ret) > + goto out; > + > + tx[0] = reg; > + tx[1] = (data & 0xff0000) >> 16; > + tx[2] = (data & 0x00ff00) >> 8; > + tx[3] = data & 0xff; > + ret = spi_write(afe4403->spi, (u8 *)tx, 4); > + if (ret) > + goto out; > + > + /* Re-Enable reading from the device */ > + tx[0] = AFE440X_CONTROL0; > + tx[1] = 0x0; > + tx[2] = 0x0; > + tx[3] = AFE440X_READ; > + ret = spi_write(afe4403->spi, (u8 *)tx, 4); > + > +out: > + mutex_unlock(&afe4403_mutex); > + return ret; > +}; > + > +static int afe4403_read_event_value(struct iio_dev *iio, > + const struct iio_chan_spec *chan, > + enum iio_event_type type, > + enum iio_event_direction dir, > + enum iio_event_info info, > + int *val, int *val2) > +{ > + struct afe4403_data *afe4403 = iio_priv(iio); > + int ret; > + > + ret = afe4403_read(afe4403, afe4403_map[chan->channel].reg, val); > + if (ret) > + goto done; > + > + *val2 = 0; > + ret = IIO_VAL_INT; > +done: > + return ret; > +} > + > +static ssize_t show_tia_separate_gains(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > + struct afe4403_data *afe4403 = iio_priv(indio_dev); > + unsigned int gain_val; > + int ret; > + > + ret = afe4403_read(afe4403, AFE440X_TIAGAIN, &gain_val); > + if (ret) > + return ret; > + > + return scnprintf(buf, PAGE_SIZE, "%u\n", > + ((gain_val & AFE440X_TIA_GAIN_SEP_GAIN_MASK) >> > + AFE440X_TIA_GAIN_SEP_GAIN_SHIFT)); > +} > + > +static int store_tia_separate_gains(struct device *dev, > + struct device_attribute *attr, > + const char *buf, size_t len) > +{ > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > + struct afe4403_data *afe4403 = iio_priv(indio_dev); > + unsigned state; > + unsigned int control_val; > + int ret; > + > + if (kstrtoint(buf, 0, &state)) > + return -EINVAL; > + > + ret = afe4403_read(afe4403, AFE440X_TIAGAIN, &control_val); > + if (ret) > + return ret; > + > + if (state) > + control_val |= 1 << AFE440X_TIA_GAIN_SEP_GAIN_SHIFT; > + else > + control_val &= ~AFE440X_TIA_GAIN_SEP_GAIN_MASK; > + > + ret = afe4403_write(afe4403, AFE440X_TIAGAIN, control_val); > + if (ret) > + return ret; > + > + return len; > +} > + > +static ssize_t show_measurement(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > + struct afe4403_data *afe4403 = iio_priv(indio_dev); > + unsigned int control_val; > + int ret; > + > + ret = afe4403_read(afe4403, AFE440X_CONTROL2, &control_val); > + if (ret) > + return ret; > + > + return scnprintf(buf, PAGE_SIZE, "%u\n", > + !(control_val & AFE440X_CNTRL_2_PWR_DWN)); > +} > + > +static int store_measurement(struct device *dev, > + struct device_attribute *attr, > + const char *buf, size_t len) > +{ > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > + struct afe4403_data *afe4403 = iio_priv(indio_dev); > + unsigned int control_val; > + unsigned state; > + int ret; > + > + if (kstrtoint(buf, 0, &state)) > + return -EINVAL; > + > + ret = afe4403_read(afe4403, AFE440X_CONTROL2, &control_val); > + if (ret) > + return ret; > + > + if (state) > + control_val &= ~AFE440X_CNTRL_2_PWR_DWN; > + else > + control_val |= AFE440X_CNTRL_2_PWR_DWN; > + > + ret = afe4403_write(afe4403, AFE440X_CONTROL2, control_val); > + if (ret) > + return ret; > + > + afe4403->state = (control_val & AFE440X_CNTRL_2_PWR_DWN); > + > + return len; > +} > + > +static int set_tia_gain_cap(struct afe4403_data *afe4403, u8 reg, > + int data) > +{ > + int ret; > + int tia_gain; > + > + ret = afe4403_read(afe4403, reg, &tia_gain); > + if (ret) > + return ret; > + > + tia_gain &= ~AFE440X_TIA_GAIN_CAP_MASK; > + tia_gain |= (data << AFE440X_TIA_GAIN_CAP_SHIFT) & AFE440X_TIA_GAIN_CAP_MASK; > + > + return afe4403_write(afe4403, reg, tia_gain); > +} > + > +static int set_tia_gain_res(struct afe4403_data *afe4403, u8 reg, > + int data) > +{ > + int ret; > + int tia_gain; > + > + ret = afe4403_read(afe4403, reg, &tia_gain); > + if (ret) > + return ret; > + > + tia_gain &= ~AFE440X_TIA_GAIN_RES_MASK; > + tia_gain |= data; > + > + return afe4403_write(afe4403, reg, tia_gain); > +} > + > +static ssize_t store_tia_amb_gain_cap(struct device *dev, > + struct device_attribute *attr, > + const char *buf, size_t len) > +{ > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > + struct afe4403_data *afe4403 = iio_priv(indio_dev); > + unsigned val; > + int ret; > + > + if (kstrtoint(buf, 0, &val)) > + return -EINVAL; > + > + ret = set_tia_gain_cap(afe4403, AFE440X_TIA_AMB_GAIN, val); > + if (ret) > + return ret; > + > + return len; > +} > + > +static ssize_t show_tia_amb_gain_cap(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > + struct afe4403_data *afe4403 = iio_priv(indio_dev); > + int ret; > + int gain; > + > + ret = afe4403_read(afe4403, AFE440X_TIA_AMB_GAIN, &gain); > + if (ret) > + return ret; > + > + > + return scnprintf(buf, PAGE_SIZE, "%u\n", > + (gain & AFE440X_TIA_GAIN_CAP_MASK) >> AFE440X_TIA_GAIN_CAP_SHIFT); > +} > + > +static ssize_t store_tia_amb_gain_res(struct device *dev, > + struct device_attribute *attr, > + const char *buf, size_t len) > +{ > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > + struct afe4403_data *afe4403 = iio_priv(indio_dev); > + unsigned val; > + int ret; > + > + if (kstrtoint(buf, 0, &val)) > + return -EINVAL; > + > + ret = set_tia_gain_res(afe4403, AFE440X_TIA_AMB_GAIN, val); > + if (ret) > + return ret; > + > + return len; > +} > + > +static ssize_t show_tia_amb_gain_res(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > + struct afe4403_data *afe4403 = iio_priv(indio_dev); > + int ret; > + int gain; > + > + ret = afe4403_read(afe4403, AFE440X_TIA_AMB_GAIN, &gain); > + if (ret) > + return ret; > + > + > + return scnprintf(buf, PAGE_SIZE, "%u\n", > + (gain & AFE440X_TIA_GAIN_RES_MASK)); > +} > + > +static ssize_t store_tia_gain_res(struct device *dev, > + struct device_attribute *attr, > + const char *buf, size_t len) > +{ > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > + struct afe4403_data *afe4403 = iio_priv(indio_dev); > + unsigned val; > + int ret; > + > + if (kstrtoint(buf, 0, &val)) > + return -EINVAL; > + > + ret = set_tia_gain_res(afe4403, AFE440X_TIAGAIN, val); > + if (ret) > + return ret; > + > + return len; > +} > + > +static ssize_t show_tia_gain_res(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > + struct afe4403_data *afe4403 = iio_priv(indio_dev); > + int ret; > + int gain; > + > + ret = afe4403_read(afe4403, AFE440X_TIAGAIN, &gain); > + if (ret) > + return ret; > + > + return scnprintf(buf, PAGE_SIZE, "%u\n", > + (gain & AFE440X_TIA_GAIN_RES_MASK)); > +} > + > +static ssize_t store_tia_gain_cap(struct device *dev, > + struct device_attribute *attr, > + const char *buf, size_t len) > +{ > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > + struct afe4403_data *afe4403 = iio_priv(indio_dev); > + unsigned val; > + int ret; > + > + if (kstrtoint(buf, 0, &val)) > + return -EINVAL; > + > + ret = set_tia_gain_cap(afe4403, AFE440X_TIAGAIN, val); > + if (ret) > + return ret; > + > + return len; > +} > + > +static ssize_t show_tia_gain_cap(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > + struct afe4403_data *afe4403 = iio_priv(indio_dev); > + int ret; > + int gain; > + > + ret = afe4403_read(afe4403, AFE440X_TIAGAIN, &gain); > + if (ret) > + return ret; > + > + return scnprintf(buf, PAGE_SIZE, "%u\n", > + (gain & AFE440X_TIA_GAIN_CAP_MASK) >> AFE440X_TIA_GAIN_CAP_SHIFT); > +} > + > +static ssize_t show_led_cntrl(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > + struct afe4403_data *afe4403 = iio_priv(indio_dev); > + struct afe4403_reg_cntrl_attribute *cntrl_attr = to_afe4403_reg_cntrl_attr(attr); > + int ret; > + int led_shift, led_reg_val, shifted_val; > + > + ret = afe4403_read(afe4403, AFE440X_LEDCNTRL, &led_reg_val); > + if (ret) > + return ret; > + > + /* Shift this a total of 6 bits for the LED number */ > + led_shift = ((cntrl_attr->val1 - 1) * AFE440X_LED_CNTRL_LED_SHIFT); > + shifted_val = (AFE440X_LED_CNTRL_LED_MASK << led_shift); > + led_reg_val &= shifted_val; > + > + return scnprintf(buf, PAGE_SIZE, "%u\n", (led_reg_val >> led_shift)); > +} > + > +static ssize_t store_led_cntrl(struct device *dev, > + struct device_attribute *attr, > + const char *buf, size_t len) > +{ > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > + struct afe4403_data *afe4403 = iio_priv(indio_dev); > + struct afe4403_reg_cntrl_attribute *cntrl_attr = to_afe4403_reg_cntrl_attr(attr); > + unsigned val; > + int ret; > + int led_shift, led_reg_val, shifted_val; > + > + if (kstrtoint(buf, 0, &val)) > + return -EINVAL; > + > + ret = afe4403_read(afe4403, AFE440X_LEDCNTRL, &led_reg_val); > + if (ret) > + return ret; > + > + /* Shift this a total of 6 bits for the LED number */ > + led_shift = ((cntrl_attr->val1 - 1) * AFE440X_LED_CNTRL_LED_SHIFT); > + shifted_val = (AFE440X_LED_CNTRL_LED_MASK << led_shift); > + led_reg_val &= ~shifted_val; > + led_reg_val |= (val << led_shift); > + > + ret = afe4403_write(afe4403, AFE440X_LEDCNTRL, val << led_shift); > + if (ret) > + return ret; > + > + return len; > +} > + > +#define ENABLE_ATTR_RW(_name) \ > + DEVICE_ATTR(out_enable_##_name, S_IRUGO | S_IWUSR, \ > + show_##_name, store_##_name) > + > +static ENABLE_ATTR_RW(measurement); > + > +#define REGISTER_CNTRL_ATTR(_name, _mode, _show, _store, _val1) \ > + { .dev_attr = __ATTR(_name, _mode, _show, _store), \ > + .val1 = _val1 } > + > +#define AFE4403_REG_ATTR(_name, _mode, _show, _store, _val1) \ > + struct afe4403_reg_cntrl_attribute afe4403_attr_##_name = \ > + REGISTER_CNTRL_ATTR(_name, _mode, _show, _store, _val1) > + > +#define TIA_GAIN_RW(_name) \ > + AFE4403_REG_ATTR(out_##_name, S_IRUGO | S_IWUSR, \ > + show_##_name, store_##_name, 0) > + > +static ENABLE_ATTR_RW(tia_separate_gains); > +static TIA_GAIN_RW(tia_gain_res); > +static TIA_GAIN_RW(tia_gain_cap); > +static TIA_GAIN_RW(tia_amb_gain_res); > +static TIA_GAIN_RW(tia_amb_gain_cap); > + > +#define LED_ATTR_RW(_name, _lednum) \ > + AFE4403_REG_ATTR(out_##_name##_led##_lednum, S_IRUGO | S_IWUSR, \ > + show_##_name, store_##_name, _lednum) > + > +static LED_ATTR_RW(led_cntrl, 1); > +static LED_ATTR_RW(led_cntrl, 2); > + > +static struct attribute *afe4403_attributes[] = { > + &dev_attr_out_enable_measurement.attr, > + &dev_attr_out_enable_tia_separate_gains.attr, > + &afe4403_attr_out_led_cntrl_led1.dev_attr.attr, > + &afe4403_attr_out_led_cntrl_led2.dev_attr.attr, > + &afe4403_attr_out_tia_gain_res.dev_attr.attr, > + &afe4403_attr_out_tia_gain_cap.dev_attr.attr, > + &afe4403_attr_out_tia_amb_gain_res.dev_attr.attr, > + &afe4403_attr_out_tia_amb_gain_cap.dev_attr.attr, > + NULL > +}; > + > +static struct attribute_group afe4403_attribute_group = { > + .attrs = afe4403_attributes > +}; > + > +static const struct iio_info afe4403_iio_info = { > + .attrs = &afe4403_attribute_group, > + .read_event_value = &afe4403_read_event_value, > + .driver_module = THIS_MODULE, > +}; > + > +static irqreturn_t afe4403_event_handler(int irq, void *private) > +{ > + struct iio_dev *indio_dev = private; > + struct afe4403_data *afe4403 = iio_priv(indio_dev); > + > + afe4403->timestamp = iio_get_time_ns(); Why stash the timestamp in your private structure? It's only used in the next call. > + > + iio_push_event(indio_dev, IIO_UNMOD_EVENT_CODE(IIO_HEARTRATE, > + 0, > + IIO_EV_TYPE_CHANGE, > + IIO_EV_DIR_EITHER), > + afe4403->timestamp); > + > + return IRQ_HANDLED; > +} > + > +struct afe4403_reg { > + uint8_t reg; > + u32 value; > +} afe4403_init_regs[] = { > + { AFE440X_LED2STC, 0x000820}, > + { AFE440X_LED2ENDC, 0x000f9e }, > + { AFE440X_LED2LEDSTC, 0x0007d0 }, > + { AFE440X_LED2LEDENDC, 0x000f9f }, > + { AFE440X_ALED2STC, 0x000050 }, > + { AFE440X_ALED2ENDC, 0x0007ce }, > + { AFE440X_LED1STC, 0x00c350 }, > + { AFE440X_LED1ENDC, 0x00c350 }, > + { AFE440X_LED1LEDSTC, 0x00c350 }, > + { AFE440X_LED1LEDENDC, 0x00c350 }, > + { AFE440X_ALED1STC, 0x000ff0 }, > + { AFE440X_ALED1ENDC, 0x00176e }, > + { AFE440X_LED2CONVST, 0x001775 }, > + { AFE440X_LED2CONVEND, 0x001f3f }, > + { AFE440X_ALED2CONVST, 0x001f45 }, > + { AFE440X_ALED2CONVEND, 0x00270f }, > + { AFE440X_LED1CONVST, 0x002715 }, > + { AFE440X_LED1CONVEND, 0x002edf }, > + { AFE440X_ALED1CONVST, 0x002ee5 }, > + { AFE440X_ALED1CONVEND, 0x0036af }, > + { AFE440X_ADCRSTSTCT0, 0x001770 }, > + { AFE440X_ADCRSTENDCT0, 0x001774 }, > + { AFE440X_ADCRSTSTCT1, 0x001f40 }, > + { AFE440X_ADCRSTENDCT1, 0x001f44 }, > + { AFE440X_ADCRSTSTCT2, 0x002710 }, > + { AFE440X_ADCRSTENDCT2, 0x002714 }, > + { AFE440X_ADCRSTSTCT3, 0x002ee0 }, > + { AFE440X_ADCRSTENDCT3, 0x002ee4 }, > + { AFE440X_PRPCOUNT, 0x0009c3f }, What is the 7? > + { AFE440X_CONTROL1, (AFE440X_CNTRL_1_TIMER_EN | 0x000007) }, > + { AFE440X_TIAGAIN, (AFE440X_TIA_GAIN_SEP_GAIN_MASK | > + AFE440X_TIA_GAIN_RES_1_M) }, > + { AFE440X_TIA_AMB_GAIN, AFE440X_TIA_GAIN_RES_1_M }, What about the 1414? > + { AFE440X_LEDCNTRL, (AFE4403_LEDCNTRL_RANGE_TX_FULL | 0x0001414) }, > + { AFE440X_CONTROL2, AFE4403_CNTRL_2_TX_REF0 }, > +}; > + > +static int afe4403_init(struct afe4403_data *afe4403) > +{ > + int ret, i, reg_count; > + > + /* Hard reset the device needs to be held for 1ms per data sheet */ > + if (afe4403->reset_gpio) { > + gpiod_set_value(afe4403->reset_gpio, 0); > + udelay(1000); > + gpiod_set_value(afe4403->reset_gpio, 1); > + } else { > + /* Soft reset the device */ > + ret = afe4403_write(afe4403, AFE440X_CONTROL0, > + AFE440X_SW_RESET); > + if (ret) > + return ret; > + } > + > + reg_count = ARRAY_SIZE(afe4403_init_regs); Why the local reg_count variable? Squash it into the next line. > + for (i = 0; i < reg_count; i++) { > + ret = afe4403_write(afe4403, afe4403_init_regs[i].reg, > + afe4403_init_regs[i].value); > + if (ret) > + return ret; > + } > + > + return ret; > +}; > + > +static int afe4403_spi_probe(struct spi_device *spi) > +{ > + struct afe4403_data *afe4403; > + struct iio_dev *indio_dev; > + int ret; > + > + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*afe4403)); > + if (indio_dev == NULL) { > + dev_err(&spi->dev, "Failed to allocate iio device\n"); > + return -ENOMEM; > + } > + > + spi_set_drvdata(spi, indio_dev); > + > + afe4403 = iio_priv(indio_dev); > + afe4403->spi = spi; > + > + indio_dev->dev.parent = &spi->dev; > + indio_dev->name = "afe4403"; > + indio_dev->info = &afe4403_iio_info; > + indio_dev->modes = INDIO_DIRECT_MODE; > + indio_dev->channels = afe4403_channels; > + indio_dev->num_channels = ARRAY_SIZE(afe4403_channels); > + > + afe4403->data_gpio = devm_gpiod_get(&spi->dev, "data-ready"); > + if (IS_ERR(afe4403->data_gpio)) { > + ret = PTR_ERR(afe4403->data_gpio); > + if (ret != -ENOENT && ret != -ENOSYS) { > + dev_err(&spi->dev, "Failed to allocate data_ready\n"); > + return ret; > + } > + afe4403->data_gpio = NULL; > + } else { > + gpiod_direction_input(afe4403->data_gpio); > + afe4403->irq = gpiod_to_irq(afe4403->data_gpio); > + } There is no direct use of this one as a gpio. Hence it should be treated as just an irq througout. For that matter, once set here data_gpio is never used anywhere else so should be local. Also, spi devices can have an irq so use that. Note that this stuff about setting direction etc just means that either the bios/firmware is not setting it up as expected, or the gpio chip driver isn't handling it. > + > + afe4403->reset_gpio = devm_gpiod_get(&spi->dev, "reset"); > + if (IS_ERR(afe4403->reset_gpio)) { > + ret = PTR_ERR(afe4403->reset_gpio); Add a comment here to explain why these two error cases are fine. > + if (ret != -ENOENT && ret != -ENOSYS) { > + dev_err(&spi->dev, "Failed to allocate reset gpio\n"); > + return ret; > + } > + afe4403->reset_gpio = NULL; > + } else { > + gpiod_direction_output(afe4403->reset_gpio, 1); > + } > + > + afe4403->regulator = devm_regulator_get(&spi->dev, "led"); > + if (IS_ERR(afe4403->regulator)) { > + ret = PTR_ERR(afe4403->regulator); > + dev_err(&spi->dev, > + "unable to get regulator, error: %d\n", ret); > + return ret; > + } irq is not used outside this function, so make it a local variable. > + if (afe4403->irq > 0) { > + ret = devm_request_threaded_irq(&spi->dev, afe4403->irq, > + NULL, > + afe4403_event_handler, > + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, > + "afe4403 int", > + indio_dev); > + if (ret) { > + dev_err(&spi->dev, "unable to request IRQ\n"); > + goto probe_error; > + } > + } > + > + ret = iio_device_register(indio_dev); > + if (ret < 0) > + goto probe_error; > + > + ret = afe4403_init(afe4403); You are running init after you have exposed the user interface? Would expect this an the device_register to be in the oposite order. > + if (ret) { > + dev_err(&spi->dev, "Failed to init device\n"); > + goto init_failure; > + } > + > + return 0; > + > +init_failure: > + iio_device_unregister(indio_dev); > +probe_error: > + return ret; > +} > + > +static int afe4403_spi_remove(struct spi_device *spi) > +{ > + struct iio_dev *indio_dev = spi_get_drvdata(spi); > + struct afe4403_data *afe4403 = iio_priv(indio_dev); > + > + iio_device_unregister(indio_dev); > + > + if (!IS_ERR(afe4403->regulator)) > + regulator_disable(afe4403->regulator); > + > + return 0; > +} > + > +static int __maybe_unused afe4403_suspend(struct device *dev) > +{ > + struct afe4403_data *afe4403 = dev_get_drvdata(dev); > + int ret = 0; > + > + ret = afe4403_write(afe4403, AFE440X_CONTROL2, AFE440X_CNTRL_2_PWR_DWN); > + if (ret) > + goto out; > + > + ret = regulator_disable(afe4403->regulator); > + if (ret) > + dev_err(dev, "Failed to disable regulator\n"); > + > +out: > + return ret; > +} > + > +static int __maybe_unused afe4403_resume(struct device *dev) > +{ > + struct afe4403_data *afe4403 = dev_get_drvdata(dev); > + int ret = 0; > + state is never set anywhere. > + if (afe4403->state) { > + ret = afe4403_write(afe4403, AFE440X_CONTROL2, > + ~AFE440X_CNTRL_2_PWR_DWN); > + if (ret) > + goto out; > + } > + ret = regulator_enable(afe4403->regulator); > + if (ret) > + dev_err(dev, "Failed to disable regulator\n"); > + > +out: > + return ret; > +} > + > +static SIMPLE_DEV_PM_OPS(afe4403_pm_ops, afe4403_suspend, afe4403_resume); > + > +#if IS_ENABLED(CONFIG_OF) > +static const struct of_device_id afe4403_of_match[] = { > + { .compatible = "ti,afe4403", }, > + {} > +}; > +MODULE_DEVICE_TABLE(of, afe4403_of_match); > +#endif > + > +static const struct spi_device_id afe4403_id[] = { > + {"afe4403", 0}, > + {}, > +}; > +MODULE_DEVICE_TABLE(spi, afe4403_id); > + > +static struct spi_driver afe4403_spi_driver = { > + .driver = { > + .name = "afe4403", > + .owner = THIS_MODULE, > + .of_match_table = of_match_ptr(afe4403_of_match), > + .pm = &afe4403_pm_ops, > + }, > + .probe = afe4403_spi_probe, > + .remove = afe4403_spi_remove, > + .id_table = afe4403_id, > +}; > +module_spi_driver(afe4403_spi_driver); > + > +MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>"); > +MODULE_DESCRIPTION("TI AFE4403 Heart Rate and Pulse Oximeter"); > +MODULE_LICENSE("GPL"); > diff --git a/drivers/iio/health/afe440x.h b/drivers/iio/health/afe440x.h > new file mode 100644 > index 0000000..c71a97a > --- /dev/null > +++ b/drivers/iio/health/afe440x.h > @@ -0,0 +1,116 @@ > +/* > + * AFE440X Heart Rate Monitors and Low-Cost Pulse Oximeters > + * Common registers and bit definitions. > + * > + * Author: Dan Murphy <dmurphy@ti.com> > + * > + * Copyright: (C) 2015 Texas Instruments, Inc. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, but > + * WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > + * General Public License for more details. > + */ > + > +#ifndef _AFE440X_H > +#define _AFE440X_H > + > +#define AFE440X_CONTROL0 0x00 > +#define AFE440X_LED2STC 0x01 > +#define AFE440X_LED2ENDC 0x02 > +#define AFE440X_LED1LEDSTC 0x03 > +#define AFE440X_LED1LEDENDC 0x04 > +#define AFE440X_ALED2STC 0x05 > +#define AFE440X_ALED2ENDC 0x06 > +#define AFE440X_LED1STC 0x07 > +#define AFE440X_LED1ENDC 0x08 > +#define AFE440X_LED2LEDSTC 0x09 > +#define AFE440X_LED2LEDENDC 0x0a > +#define AFE440X_ALED1STC 0x0b > +#define AFE440X_ALED1ENDC 0x0c > +#define AFE440X_LED2CONVST 0x0d > +#define AFE440X_LED2CONVEND 0x0e > +#define AFE440X_ALED2CONVST 0x0f > +#define AFE440X_ALED2CONVEND 0x10 > +#define AFE440X_LED1CONVST 0x11 > +#define AFE440X_LED1CONVEND 0x12 > +#define AFE440X_ALED1CONVST 0x13 > +#define AFE440X_ALED1CONVEND 0x14 > +#define AFE440X_ADCRSTSTCT0 0x15 > +#define AFE440X_ADCRSTENDCT0 0x16 > +#define AFE440X_ADCRSTSTCT1 0x17 > +#define AFE440X_ADCRSTENDCT1 0x18 > +#define AFE440X_ADCRSTSTCT2 0x19 > +#define AFE440X_ADCRSTENDCT2 0x1a > +#define AFE440X_ADCRSTSTCT3 0x1b > +#define AFE440X_ADCRSTENDCT3 0x1c > +#define AFE440X_PRPCOUNT 0x1d > +#define AFE440X_CONTROL1 0x1e > +#define AFE440X_SPARE1 0x1f > +#define AFE440X_TIAGAIN 0x20 > +#define AFE440X_TIA_AMB_GAIN 0x21 > +#define AFE440X_LEDCNTRL 0x22 > +#define AFE440X_CONTROL2 0x23 > +#define AFE440X_SPARE2 0x24 > +#define AFE440X_SPARE3 0x25 > +#define AFE440X_SPARE4 0x26 > +#define AFE440X_ALARM 0x29 > +#define AFE440X_LED2VAL 0x2A > +#define AFE440X_ALED2VAL 0x2B > +#define AFE440X_LED1VAL 0x2C > +#define AFE440X_ALED1VAL 0x2D > +#define AFE440X_LED2_ALED2VAL 0x2E > +#define AFE440X_LED1_ALED1VAL 0x2F > +#define AFE440X_DIAG 0x30 > +#define AFE440X_CONTROL3 0x31 > +#define AFE440X_PDNCYCLESTC 0x32 > +#define AFE440X_PDNCYCLEENDC 0x33 > + > +/* CONTROL_0 register */ > +#define AFE440X_READ BIT(0) > +#define AFE440X_WRITE 0x0 > +#define AFE440X_SW_RESET BIT(3) > + > +/* CONTROL_1 register */ > +#define AFE440X_CNTRL_1_TIMER_EN BIT(8) > + > +/* CONTROL_2 register */ > +#define AFE440X_CNTRL_2_PWR_DWN BIT(0) > +#define AFE440X_CNTRL_2_PWR_DWN_RX BIT(1) > +#define AFE440X_CNTRL_2_DYNAMIC4 BIT(3) > +#define AFE440X_CNTRL_2_DYNAMIC3 BIT(4) > +#define AFE440X_CNTRL_2_OSC_EN BIT(9) > +#define AFE440X_CNTRL_2_DYNAMIC2 BIT(14) > +#define AFE440X_CNTRL_2_DYNAMIC1 BIT(20) > + > +/* LED_CNTRL register */ > +#define AFE440X_LED_CNTRL_LED_MASK 0x3f > +#define AFE440X_LED_CNTRL_LED_SHIFT 6 > + > +/* TIA_GAIN and TIA_AMB_GAIN Register */ > +#define AFE440X_TIA_GAIN_RES_MASK 0x7 > +#define AFE440X_TIA_GAIN_CAP_MASK 0x38 > +#define AFE440X_TIA_GAIN_CAP_SHIFT 3 > +#define AFE440X_TIA_GAIN_SEP_GAIN_SHIFT 0xf > +#define AFE440X_TIA_GAIN_SEP_GAIN_MASK 0x8000 > + > +/* TIA_GAIN Register */ > +#define AFE440X_TIA_GAIN_RES_500_K 0x0 > +#define AFE440X_TIA_GAIN_RES_250_K 0x1 > +#define AFE440X_TIA_GAIN_RES_100_K 0x2 > +#define AFE440X_TIA_GAIN_RES_50_K 0x3 > +#define AFE440X_TIA_GAIN_RES_25_K 0x4 > +#define AFE440X_TIA_GAIN_RES_10_K 0x5 > +#define AFE440X_TIA_GAIN_RES_1_M 0x6 > + > + > +struct afe440x_chan_map { > + int channel; > + unsigned char reg; > +}; > + > +#endif > ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2015-06-02 16:51 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2015-05-11 20:05 Heart Rate monitors v2 Dan Murphy 2015-05-11 20:05 ` [PATCH v2 1/3] iio: heart_monitors: Add an event for heart rate monitors Dan Murphy 2015-05-17 12:52 ` Jonathan Cameron 2015-06-02 16:51 ` Dan Murphy 2015-05-11 20:05 ` [PATCH v2 2/3] iio: bindings: Add TI afe4403 heart monitor documentation Dan Murphy 2015-05-17 12:51 ` Jonathan Cameron 2015-05-11 20:05 ` [PATCH v2 3/3] iio: health: Add TI afe4403 heart monitor Dan Murphy 2015-05-17 12:50 ` Jonathan Cameron
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).