From: Jonathan Cameron <jic23@kernel.org>
To: Hartmut Knaack <knaack.h@gmx.de>, linux-iio@vger.kernel.org
Cc: Lars-Peter Clausen <lars@metafoo.de>,
Peter Meerwald <pmeerw@pmeerw.net>,
Roberta Dobrescu <roberta.dobrescu@gmail.com>,
Daniel Baluta <daniel.baluta@intel.com>,
Irina Tirdea <irina.tirdea@intel.com>
Subject: Re: [PATCH 21/32] tools:iio:iio_utils: add error handling
Date: Sun, 31 May 2015 19:44:11 +0100 [thread overview]
Message-ID: <556B567B.5030600@kernel.org> (raw)
In-Reply-To: <e655a43af0f41e20a66b798e1d1859afa89dc9ef.1433072539.git.knaack.h@gmx.de>
On 31/05/15 13:40, Hartmut Knaack wrote:
> Add error handling to calls which can indicate a major problem by
> returning an error code.
> This also sets ret to -ENOENT in iioutils_get_type() and
> iioutils_get_param_float() to indicate if no matching directory entry was
> found.
>
> Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Applied.
> ---
> tools/iio/iio_utils.c | 265 ++++++++++++++++++++++++++++++++++++++++++--------
> 1 file changed, 223 insertions(+), 42 deletions(-)
>
> diff --git a/tools/iio/iio_utils.c b/tools/iio/iio_utils.c
> index f0896f46..e1828d0 100644
> --- a/tools/iio/iio_utils.c
> +++ b/tools/iio/iio_utils.c
> @@ -50,6 +50,10 @@ int iioutils_break_up_name(const char *full_name,
> return -ENOMEM;
>
> working = strtok(current, "_\0");
> + if (!working) {
> + free(current);
> + return -EINVAL;
> + }
>
> w = working;
> r = working;
> @@ -117,6 +121,7 @@ int iioutils_get_type(unsigned *is_signed,
> ret = -errno;
> goto error_free_builtname_generic;
> }
> + ret = -ENOENT;
> while (ent = readdir(dp), ent != NULL)
> /*
> * Do we allow devices to override a generic name with
> @@ -162,7 +167,12 @@ int iioutils_get_type(unsigned *is_signed,
> *is_signed = 1;
> else
> *is_signed = 0;
> - fclose(sysfsfp);
> + if (fclose(sysfsfp)) {
> + ret = -errno;
> + printf("Failed to close %s\n", filename);
> + goto error_free_filename;
> + }
> +
> free(filename);
>
> filename = 0;
> @@ -170,12 +180,16 @@ int iioutils_get_type(unsigned *is_signed,
> }
> error_close_sysfsfp:
> if (sysfsfp)
> - fclose(sysfsfp);
> + if (fclose(sysfsfp))
> + perror("iioutils_get_type(): Failed to close file");
> +
> error_free_filename:
> if (filename)
> free(filename);
> error_closedir:
> - closedir(dp);
> + if (closedir(dp) == -1)
> + perror("iioutils_get_type(): Failed to close directory");
> +
> error_free_builtname_generic:
> free(builtname_generic);
> error_free_builtname:
> @@ -215,6 +229,7 @@ int iioutils_get_param_float(float *output,
> ret = -errno;
> goto error_free_builtname_generic;
> }
> + ret = -ENOENT;
> while (ent = readdir(dp), ent != NULL)
> if ((strcmp(builtname, ent->d_name) == 0) ||
> (strcmp(builtname_generic, ent->d_name) == 0)) {
> @@ -229,14 +244,19 @@ int iioutils_get_param_float(float *output,
> ret = -errno;
> goto error_free_filename;
> }
> - fscanf(sysfsfp, "%f", output);
> + errno = 0;
> + if (fscanf(sysfsfp, "%f", output) != 1)
> + ret = errno ? -errno : -ENODATA;
> +
> break;
> }
> error_free_filename:
> if (filename)
> free(filename);
> error_closedir:
> - closedir(dp);
> + if (closedir(dp) == -1)
> + perror("iioutils_get_param_float(): Failed to close directory");
> +
> error_free_builtname_generic:
> free(builtname_generic);
> error_free_builtname:
> @@ -310,10 +330,24 @@ int build_channel_array(const char *device_dir,
> free(filename);
> goto error_close_dir;
> }
> - fscanf(sysfsfp, "%i", &ret);
> + errno = 0;
> + if (fscanf(sysfsfp, "%i", &ret) != 1) {
> + ret = errno ? -errno : -ENODATA;
> + if (fclose(sysfsfp))
> + perror("build_channel_array(): Failed to close file");
> +
> + free(filename);
> + goto error_close_dir;
> + }
> +
> if (ret == 1)
> (*counter)++;
> - fclose(sysfsfp);
> + if (fclose(sysfsfp)) {
> + ret = -errno;
> + free(filename);
> + goto error_close_dir;
> + }
> +
> free(filename);
> }
> *ci_array = malloc(sizeof(**ci_array) * (*counter));
> @@ -344,8 +378,20 @@ int build_channel_array(const char *device_dir,
> count--;
> goto error_cleanup_array;
> }
> - fscanf(sysfsfp, "%i", ¤t_enabled);
> - fclose(sysfsfp);
> + errno = 0;
> + if (fscanf(sysfsfp, "%i", ¤t_enabled) != 1) {
> + ret = errno ? -errno : -ENODATA;
> + free(filename);
> + count--;
> + goto error_cleanup_array;
> + }
> +
> + if (fclose(sysfsfp)) {
> + ret = -errno;
> + free(filename);
> + count--;
> + goto error_cleanup_array;
> + }
>
> if (!current_enabled) {
> free(filename);
> @@ -383,8 +429,29 @@ int build_channel_array(const char *device_dir,
> goto error_cleanup_array;
> }
> sysfsfp = fopen(filename, "r");
> - fscanf(sysfsfp, "%u", ¤t->index);
> - fclose(sysfsfp);
> + if (sysfsfp == NULL) {
> + ret = -errno;
> + printf("failed to open %s\n", filename);
> + free(filename);
> + goto error_cleanup_array;
> + }
> +
> + errno = 0;
> + if (fscanf(sysfsfp, "%u", ¤t->index) != 1) {
> + ret = errno ? -errno : -ENODATA;
> + if (fclose(sysfsfp))
> + perror("build_channel_array(): Failed to close file");
> +
> + free(filename);
> + goto error_cleanup_array;
> + }
> +
> + if (fclose(sysfsfp)) {
> + ret = -errno;
> + free(filename);
> + goto error_cleanup_array;
> + }
> +
> free(filename);
> /* Find the scale */
> ret = iioutils_get_param_float(¤t->scale,
> @@ -410,10 +477,16 @@ int build_channel_array(const char *device_dir,
> device_dir,
> current->name,
> current->generic_name);
> + if (ret < 0)
> + goto error_cleanup_array;
> }
> }
>
> - closedir(dp);
> + if (closedir(dp) == -1) {
> + ret = -errno;
> + goto error_cleanup_array;
> + }
> +
> free(scan_el_dir);
> /* reorder so that the array is in index order */
> bsort_channel_array_by_index(ci_array, *counter);
> @@ -427,7 +500,10 @@ error_cleanup_array:
> }
> free(*ci_array);
> error_close_dir:
> - closedir(dp);
> + if (dp)
> + if (closedir(dp) == -1)
> + perror("build_channel_array(): Failed to close dir");
> +
> error_free_name:
> free(scan_el_dir);
> error_ret:
> @@ -496,29 +572,45 @@ int find_type_by_name(const char *name, const char *type)
> + numstrlen
> + 6);
> if (filename == NULL) {
> - closedir(dp);
> - return -ENOMEM;
> + ret = -ENOMEM;
> + goto error_close_dir;
> + }
> +
> + ret = sprintf(filename, "%s%s%d/name", iio_dir,
> + type, number);
> + if (ret < 0) {
> + free(filename);
> + goto error_close_dir;
> }
> - sprintf(filename, "%s%s%d/name",
> - iio_dir,
> - type,
> - number);
> +
> nameFile = fopen(filename, "r");
> if (!nameFile) {
> free(filename);
> continue;
> }
> free(filename);
> - fscanf(nameFile, "%s", thisname);
> - fclose(nameFile);
> + errno = 0;
> + if (fscanf(nameFile, "%s", thisname) != 1) {
> + ret = errno ? -errno : -ENODATA;
> + goto error_close_dir;
> + }
> +
> + if (fclose(nameFile)) {
> + ret = -errno;
> + goto error_close_dir;
> + }
> +
> if (strcmp(name, thisname) == 0) {
> - closedir(dp);
> + if (closedir(dp) == -1)
> + return -errno;
> return number;
> }
> }
> }
> }
> - closedir(dp);
> + if (closedir(dp) == -1)
> + return -errno;
> +
> return -ENODEV;
>
> error_close_dir:
> @@ -536,15 +628,29 @@ static int _write_sysfs_int(char *filename, char *basedir, int val, int verify)
>
> if (temp == NULL)
> return -ENOMEM;
> - sprintf(temp, "%s/%s", basedir, filename);
> + ret = sprintf(temp, "%s/%s", basedir, filename);
> + if (ret < 0)
> + goto error_free;
> +
> sysfsfp = fopen(temp, "w");
> if (sysfsfp == NULL) {
> ret = -errno;
> printf("failed to open %s\n", temp);
> goto error_free;
> }
> - fprintf(sysfsfp, "%d", val);
> - fclose(sysfsfp);
> + ret = fprintf(sysfsfp, "%d", val);
> + if (ret < 0) {
> + if (fclose(sysfsfp))
> + perror("_write_sysfs_int(): Failed to close dir");
> +
> + goto error_free;
> + }
> +
> + if (fclose(sysfsfp)) {
> + ret = -errno;
> + goto error_free;
> + }
> +
> if (verify) {
> sysfsfp = fopen(temp, "r");
> if (sysfsfp == NULL) {
> @@ -552,8 +658,19 @@ static int _write_sysfs_int(char *filename, char *basedir, int val, int verify)
> printf("failed to open %s\n", temp);
> goto error_free;
> }
> - fscanf(sysfsfp, "%d", &test);
> - fclose(sysfsfp);
> + if (fscanf(sysfsfp, "%d", &test) != 1) {
> + ret = errno ? -errno : -ENODATA;
> + if (fclose(sysfsfp))
> + perror("_write_sysfs_int(): Failed to close dir");
> +
> + goto error_free;
> + }
> +
> + if (fclose(sysfsfp)) {
> + ret = -errno;
> + goto error_free;
> + }
> +
> if (test != val) {
> printf("Possible failure in int write %d to %s%s\n",
> val,
> @@ -588,15 +705,29 @@ static int _write_sysfs_string(char *filename, char *basedir, char *val,
> printf("Memory allocation failed\n");
> return -ENOMEM;
> }
> - sprintf(temp, "%s/%s", basedir, filename);
> + ret = sprintf(temp, "%s/%s", basedir, filename);
> + if (ret < 0)
> + goto error_free;
> +
> sysfsfp = fopen(temp, "w");
> if (sysfsfp == NULL) {
> ret = -errno;
> printf("Could not open %s\n", temp);
> goto error_free;
> }
> - fprintf(sysfsfp, "%s", val);
> - fclose(sysfsfp);
> + ret = fprintf(sysfsfp, "%s", val);
> + if (ret < 0) {
> + if (fclose(sysfsfp))
> + perror("_write_sysfs_string(): Failed to close dir");
> +
> + goto error_free;
> + }
> +
> + if (fclose(sysfsfp)) {
> + ret = -errno;
> + goto error_free;
> + }
> +
> if (verify) {
> sysfsfp = fopen(temp, "r");
> if (sysfsfp == NULL) {
> @@ -604,8 +735,19 @@ static int _write_sysfs_string(char *filename, char *basedir, char *val,
> printf("could not open file to verify\n");
> goto error_free;
> }
> - fscanf(sysfsfp, "%s", temp);
> - fclose(sysfsfp);
> + if (fscanf(sysfsfp, "%s", temp) != 1) {
> + ret = errno ? -errno : -ENODATA;
> + if (fclose(sysfsfp))
> + perror("_write_sysfs_string(): Failed to close dir");
> +
> + goto error_free;
> + }
> +
> + if (fclose(sysfsfp)) {
> + ret = -errno;
> + goto error_free;
> + }
> +
> if (strcmp(temp, val) != 0) {
> printf("Possible failure in string write of %s "
> "Should be %s "
> @@ -649,14 +791,27 @@ int read_sysfs_posint(char *filename, char *basedir)
> printf("Memory allocation failed");
> return -ENOMEM;
> }
> - sprintf(temp, "%s/%s", basedir, filename);
> + ret = sprintf(temp, "%s/%s", basedir, filename);
> + if (ret < 0)
> + goto error_free;
> +
> sysfsfp = fopen(temp, "r");
> if (sysfsfp == NULL) {
> ret = -errno;
> goto error_free;
> }
> - fscanf(sysfsfp, "%d\n", &ret);
> - fclose(sysfsfp);
> + errno = 0;
> + if (fscanf(sysfsfp, "%d\n", &ret) != 1) {
> + ret = errno ? -errno : -ENODATA;
> + if (fclose(sysfsfp))
> + perror("read_sysfs_posint(): Failed to close dir");
> +
> + goto error_free;
> + }
> +
> + if (fclose(sysfsfp))
> + ret = -errno;
> +
> error_free:
> free(temp);
> return ret;
> @@ -672,14 +827,27 @@ int read_sysfs_float(char *filename, char *basedir, float *val)
> printf("Memory allocation failed");
> return -ENOMEM;
> }
> - sprintf(temp, "%s/%s", basedir, filename);
> + ret = sprintf(temp, "%s/%s", basedir, filename);
> + if (ret < 0)
> + goto error_free;
> +
> sysfsfp = fopen(temp, "r");
> if (sysfsfp == NULL) {
> ret = -errno;
> goto error_free;
> }
> - fscanf(sysfsfp, "%f\n", val);
> - fclose(sysfsfp);
> + errno = 0;
> + if (fscanf(sysfsfp, "%f\n", val) != 1) {
> + ret = errno ? -errno : -ENODATA;
> + if (fclose(sysfsfp))
> + perror("read_sysfs_float(): Failed to close dir");
> +
> + goto error_free;
> + }
> +
> + if (fclose(sysfsfp))
> + ret = -errno;
> +
> error_free:
> free(temp);
> return ret;
> @@ -695,14 +863,27 @@ int read_sysfs_string(const char *filename, const char *basedir, char *str)
> printf("Memory allocation failed");
> return -ENOMEM;
> }
> - sprintf(temp, "%s/%s", basedir, filename);
> + ret = sprintf(temp, "%s/%s", basedir, filename);
> + if (ret < 0)
> + goto error_free;
> +
> sysfsfp = fopen(temp, "r");
> if (sysfsfp == NULL) {
> ret = -errno;
> goto error_free;
> }
> - fscanf(sysfsfp, "%s\n", str);
> - fclose(sysfsfp);
> + errno = 0;
> + if (fscanf(sysfsfp, "%s\n", str) != 1) {
> + ret = errno ? -errno : -ENODATA;
> + if (fclose(sysfsfp))
> + perror("read_sysfs_string(): Failed to close dir");
> +
> + goto error_free;
> + }
> +
> + if (fclose(sysfsfp))
> + ret = -errno;
> +
> error_free:
> free(temp);
> return ret;
>
next prev parent reply other threads:[~2015-06-01 21:16 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-31 12:39 [PATCH 00/32] iio-tools out-of-staging cleanup Hartmut Knaack
2015-05-31 12:39 ` [PATCH 01/32] tools:iio:generic_buffer: fix order of freeing data Hartmut Knaack
2015-05-31 16:13 ` Jonathan Cameron
2015-05-31 12:39 ` [PATCH 02/32] tools:iio:generic_buffer: free dev_dir_name on exit Hartmut Knaack
2015-05-31 16:17 ` Jonathan Cameron
2015-05-31 12:39 ` [PATCH 03/32] tools:iio:iio_utils: free scan_el_dir " Hartmut Knaack
2015-05-31 16:19 ` Jonathan Cameron
2015-05-31 12:39 ` [PATCH 04/32] tools:iio: free channel-array completely Hartmut Knaack
2015-05-31 16:20 ` Jonathan Cameron
2015-05-31 12:39 ` [PATCH 05/32] tools:iio:iio_utils: fix allocation handling Hartmut Knaack
2015-05-31 16:23 ` Jonathan Cameron
2015-05-31 12:39 ` [PATCH 06/32] tools:iio:generic_buffer: add check before free Hartmut Knaack
2015-05-31 16:29 ` Jonathan Cameron
2015-05-31 12:39 ` [PATCH 07/32] tools:iio:lsiio: add closedir before exit Hartmut Knaack
2015-05-31 16:30 ` Jonathan Cameron
2015-05-31 12:39 ` [PATCH 08/32] tools:iio: save errno first Hartmut Knaack
2015-05-31 16:33 ` Jonathan Cameron
2015-05-31 12:39 ` [PATCH 09/32] tools:iio:iio_event_monitor: save right errno Hartmut Knaack
2015-05-31 16:34 ` Jonathan Cameron
2015-05-31 12:39 ` [PATCH 10/32] tools:iio:generic_buffer: fix check of errno Hartmut Knaack
2015-05-31 16:35 ` Jonathan Cameron
2015-05-31 12:39 ` [PATCH 11/32] tools:iio:generic_buffer: pass up right error code Hartmut Knaack
2015-05-31 16:36 ` Jonathan Cameron
2015-05-31 12:39 ` [PATCH 12/32] tools:iio:generic_buffer: sign-extend and shift data Hartmut Knaack
2015-05-31 16:41 ` Jonathan Cameron
2015-05-31 12:39 ` [PATCH 13/32] tools:iio:iio_utils: check amount of matches Hartmut Knaack
2015-05-31 16:41 ` Jonathan Cameron
2015-05-31 12:40 ` [PATCH 14/32] tools:iio:iio_utils: implement digit calculation Hartmut Knaack
2015-05-31 18:19 ` Jonathan Cameron
2015-05-31 12:40 ` [PATCH 15/32] tools:iio:iio_utils: mark private function static Hartmut Knaack
2015-05-31 12:40 ` [PATCH 16/32] tools:iio: catch errors in string allocation Hartmut Knaack
2015-05-31 18:21 ` Jonathan Cameron
2015-05-31 12:40 ` [PATCH 17/32] tools:iio:generic_buffer: catch errors for arguments conversion Hartmut Knaack
2015-05-31 12:40 ` [PATCH 18/32] tools:iio:generic_buffer: add error handling Hartmut Knaack
2015-05-31 12:40 ` [PATCH 19/32] tools:iio:iio_event_monitor: " Hartmut Knaack
2015-05-31 18:25 ` Jonathan Cameron
2015-05-31 12:40 ` [PATCH 20/32] tools:iio:iio_event_monitor: check if event is fully read Hartmut Knaack
2015-05-31 18:36 ` Jonathan Cameron
2015-06-01 22:00 ` Hartmut Knaack
2015-05-31 12:40 ` [PATCH 21/32] tools:iio:iio_utils: add error handling Hartmut Knaack
2015-05-31 18:44 ` Jonathan Cameron [this message]
2015-05-31 12:40 ` [PATCH 22/32] tools:iio:lsiio: " Hartmut Knaack
2015-05-31 18:45 ` Jonathan Cameron
2015-05-31 12:40 ` [PATCH 23/32] tools:iio:iio_utils: add missing documentation Hartmut Knaack
2015-06-01 7:33 ` Jonathan Cameron
2015-05-31 12:40 ` [PATCH 24/32] tools:iio: return values directly Hartmut Knaack
2015-06-01 7:34 ` Jonathan Cameron
2015-05-31 12:40 ` [PATCH 25/32] tools:iio:iio_event_monitor: refactor events output Hartmut Knaack
2015-06-01 7:34 ` Jonathan Cameron
2015-05-31 12:40 ` [PATCH 26/32] tools:iio:iio_utils: refactor assignment of is_signed Hartmut Knaack
2015-06-01 7:35 ` Jonathan Cameron
2015-05-31 12:40 ` [PATCH 27/32] tools:iio:iio_utils: move up reset of sysfsfp Hartmut Knaack
2015-06-01 7:37 ` Jonathan Cameron
2015-05-31 12:40 ` [PATCH 28/32] tools:iio:iio_utils: initialize count during declaration Hartmut Knaack
2015-06-01 7:38 ` Jonathan Cameron
2015-05-31 12:40 ` [PATCH 29/32] tools:iio: rework program parameters Hartmut Knaack
2015-06-01 7:40 ` Jonathan Cameron
2015-05-31 12:40 ` [PATCH 30/32] tools:iio:iio_utils: pass strings as const Hartmut Knaack
2015-06-01 7:40 ` Jonathan Cameron
2015-05-31 12:40 ` [PATCH 31/32] tools:iio: adjust coding style Hartmut Knaack
2015-06-01 7:46 ` Jonathan Cameron
2015-05-31 12:40 ` [PATCH 32/32] tools:iio: rename variables Hartmut Knaack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=556B567B.5030600@kernel.org \
--to=jic23@kernel.org \
--cc=daniel.baluta@intel.com \
--cc=irina.tirdea@intel.com \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
--cc=roberta.dobrescu@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).