From: Jonathan Cameron <jic23@kernel.org>
To: Denis Ciocca <denis.ciocca@st.com>,
Giuseppe BARBA <giuseppe.barba@st.com>,
"linux-iio@vger.kernel.org" <linux-iio@vger.kernel.org>
Subject: Re: [PATCH V4 1/5] iio: st-sensors: add configuration for WhoAmI address
Date: Thu, 23 Jul 2015 20:36:01 +0100 [thread overview]
Message-ID: <55B14221.5080909@kernel.org> (raw)
In-Reply-To: <55AE223E.1040705@st.com>
On 21/07/15 11:43, Denis Ciocca wrote:
> Thanks Giuseppe,
>
> good for me.
>
> Reviewed-by: Denis Ciocca <denis.ciocca@st.com>
> Acked-by: Denis Ciocca <denis.ciocca@st.com>
Applied to the togreg branch of iio.git. Initially pushed out
as testing for the autobuilders to play with it.
>
>
> BR,
> Denis
>
>
> On 07/21/2015 04:35 PM, Giuseppe BARBA wrote:
>> This patch permits to configure the WhoAmI register address
>> because some device could have not a standard address for
>> this register.
>>
>> Signed-off-by: Giuseppe Barba <giuseppe.barba@st.com>
>> ---
>> drivers/iio/accel/st_accel_core.c | 5 +++
>> drivers/iio/common/st_sensors/st_sensors_core.c | 49 ++++++++++++-------------
>> drivers/iio/gyro/st_gyro_core.c | 3 ++
>> drivers/iio/magnetometer/st_magn_core.c | 3 ++
>> drivers/iio/pressure/st_pressure_core.c | 3 ++
>> include/linux/iio/common/st_sensors.h | 2 +
>> 6 files changed, 39 insertions(+), 26 deletions(-)
>>
>> diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
>> index 4002e64..12b42f6 100644
>> --- a/drivers/iio/accel/st_accel_core.c
>> +++ b/drivers/iio/accel/st_accel_core.c
>> @@ -226,6 +226,7 @@ static const struct iio_chan_spec st_accel_16bit_channels[] = {
>> static const struct st_sensor_settings st_accel_sensors_settings[] = {
>> {
>> .wai = ST_ACCEL_1_WAI_EXP,
>> + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
>> .sensors_supported = {
>> [0] = LIS3DH_ACCEL_DEV_NAME,
>> [1] = LSM303DLHC_ACCEL_DEV_NAME,
>> @@ -297,6 +298,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
>> },
>> {
>> .wai = ST_ACCEL_2_WAI_EXP,
>> + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
>> .sensors_supported = {
>> [0] = LIS331DLH_ACCEL_DEV_NAME,
>> [1] = LSM303DL_ACCEL_DEV_NAME,
>> @@ -359,6 +361,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
>> },
>> {
>> .wai = ST_ACCEL_3_WAI_EXP,
>> + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
>> .sensors_supported = {
>> [0] = LSM330_ACCEL_DEV_NAME,
>> },
>> @@ -437,6 +440,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
>> },
>> {
>> .wai = ST_ACCEL_4_WAI_EXP,
>> + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
>> .sensors_supported = {
>> [0] = LIS3LV02DL_ACCEL_DEV_NAME,
>> },
>> @@ -494,6 +498,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
>> },
>> {
>> .wai = ST_ACCEL_5_WAI_EXP,
>> + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
>> .sensors_supported = {
>> [0] = LIS331DL_ACCEL_DEV_NAME,
>> },
>> diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
>> index 8086cbc..d44bf16 100644
>> --- a/drivers/iio/common/st_sensors/st_sensors_core.c
>> +++ b/drivers/iio/common/st_sensors/st_sensors_core.c
>> @@ -479,46 +479,43 @@ int st_sensors_check_device_support(struct iio_dev *indio_dev,
>> int num_sensors_list,
>> const struct st_sensor_settings *sensor_settings)
>> {
>> - u8 wai;
>> int i, n, err;
>> + u8 wai;
>> struct st_sensor_data *sdata = iio_priv(indio_dev);
>> - err = sdata->tf->read_byte(&sdata->tb, sdata->dev,
>> - ST_SENSORS_DEFAULT_WAI_ADDRESS, &wai);
>> - if (err < 0) {
>> - dev_err(&indio_dev->dev, "failed to read Who-Am-I register.\n");
>> - goto read_wai_error;
>> - }
>> -
>> for (i = 0; i < num_sensors_list; i++) {
>> - if (sensor_settings[i].wai == wai)
>> + for (n = 0; n < ST_SENSORS_MAX_4WAI; n++) {
>> + if (strcmp(indio_dev->name,
>> + sensor_settings[i].sensors_supported[n]) == 0) {
>> + break;
>> + }
>> + }
>> + if (n < ST_SENSORS_MAX_4WAI)
>> break;
>> }
>> - if (i == num_sensors_list)
>> - goto device_not_supported;
>> + if (i == num_sensors_list) {
>> + dev_err(&indio_dev->dev, "device name %s not recognized.\n",
>> + indio_dev->name);
>> + return -ENODEV;
>> + }
>> - for (n = 0; n < ARRAY_SIZE(sensor_settings[i].sensors_supported); n++) {
>> - if (strcmp(indio_dev->name,
>> - &sensor_settings[i].sensors_supported[n][0]) == 0)
>> - break;
>> + err = sdata->tf->read_byte(&sdata->tb, sdata->dev,
>> + sensor_settings[i].wai_addr, &wai);
>> + if (err < 0) {
>> + dev_err(&indio_dev->dev, "failed to read Who-Am-I register.\n");
>> + return err;
>> }
>> - if (n == ARRAY_SIZE(sensor_settings[i].sensors_supported)) {
>> - dev_err(&indio_dev->dev, "device name \"%s\" and WhoAmI (0x%02x) mismatch",
>> - indio_dev->name, wai);
>> - goto sensor_name_mismatch;
>> +
>> + if (sensor_settings[i].wai != wai) {
>> + dev_err(&indio_dev->dev, "%s: WhoAmI mismatch (0x%x).\n",
>> + indio_dev->name, wai);
>> + return -EINVAL;
>> }
>> sdata->sensor_settings =
>> (struct st_sensor_settings *)&sensor_settings[i];
>> return i;
>> -
>> -device_not_supported:
>> - dev_err(&indio_dev->dev, "device not supported: WhoAmI (0x%x).\n", wai);
>> -sensor_name_mismatch:
>> - err = -ENODEV;
>> -read_wai_error:
>> - return err;
>> }
>> EXPORT_SYMBOL(st_sensors_check_device_support);
>> diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
>> index ffe9664..4b993a5 100644
>> --- a/drivers/iio/gyro/st_gyro_core.c
>> +++ b/drivers/iio/gyro/st_gyro_core.c
>> @@ -131,6 +131,7 @@ static const struct iio_chan_spec st_gyro_16bit_channels[] = {
>> static const struct st_sensor_settings st_gyro_sensors_settings[] = {
>> {
>> .wai = ST_GYRO_1_WAI_EXP,
>> + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
>> .sensors_supported = {
>> [0] = L3G4200D_GYRO_DEV_NAME,
>> [1] = LSM330DL_GYRO_DEV_NAME,
>> @@ -190,6 +191,7 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
>> },
>> {
>> .wai = ST_GYRO_2_WAI_EXP,
>> + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
>> .sensors_supported = {
>> [0] = L3GD20_GYRO_DEV_NAME,
>> [1] = LSM330D_GYRO_DEV_NAME,
>> @@ -252,6 +254,7 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
>> },
>> {
>> .wai = ST_GYRO_3_WAI_EXP,
>> + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
>> .sensors_supported = {
>> [0] = L3GD20_GYRO_DEV_NAME,
>> },
>> diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
>> index b4bcfb7..8d7d3a1 100644
>> --- a/drivers/iio/magnetometer/st_magn_core.c
>> +++ b/drivers/iio/magnetometer/st_magn_core.c
>> @@ -192,6 +192,7 @@ static const struct iio_chan_spec st_magn_2_16bit_channels[] = {
>> static const struct st_sensor_settings st_magn_sensors_settings[] = {
>> {
>> .wai = 0, /* This sensor has no valid WhoAmI report 0 */
>> + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
>> .sensors_supported = {
>> [0] = LSM303DLH_MAGN_DEV_NAME,
>> },
>> @@ -268,6 +269,7 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = {
>> },
>> {
>> .wai = ST_MAGN_1_WAI_EXP,
>> + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
>> .sensors_supported = {
>> [0] = LSM303DLHC_MAGN_DEV_NAME,
>> [1] = LSM303DLM_MAGN_DEV_NAME,
>> @@ -346,6 +348,7 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = {
>> },
>> {
>> .wai = ST_MAGN_2_WAI_EXP,
>> + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
>> .sensors_supported = {
>> [0] = LIS3MDL_MAGN_DEV_NAME,
>> },
>> diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
>> index e881fa6..eb41d2b 100644
>> --- a/drivers/iio/pressure/st_pressure_core.c
>> +++ b/drivers/iio/pressure/st_pressure_core.c
>> @@ -178,6 +178,7 @@ static const struct iio_chan_spec st_press_lps001wp_channels[] = {
>> static const struct st_sensor_settings st_press_sensors_settings[] = {
>> {
>> .wai = ST_PRESS_LPS331AP_WAI_EXP,
>> + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
>> .sensors_supported = {
>> [0] = LPS331AP_PRESS_DEV_NAME,
>> },
>> @@ -225,6 +226,7 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
>> },
>> {
>> .wai = ST_PRESS_LPS001WP_WAI_EXP,
>> + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
>> .sensors_supported = {
>> [0] = LPS001WP_PRESS_DEV_NAME,
>> },
>> @@ -260,6 +262,7 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
>> },
>> {
>> .wai = ST_PRESS_LPS25H_WAI_EXP,
>> + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
>> .sensors_supported = {
>> [0] = LPS25H_PRESS_DEV_NAME,
>> },
>> diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h
>> index 2c476ac..3c17cd7 100644
>> --- a/include/linux/iio/common/st_sensors.h
>> +++ b/include/linux/iio/common/st_sensors.h
>> @@ -166,6 +166,7 @@ struct st_sensor_transfer_function {
>> /**
>> * struct st_sensor_settings - ST specific sensor settings
>> * @wai: Contents of WhoAmI register.
>> + * @wai_addr: The address of WhoAmI register.
>> * @sensors_supported: List of supported sensors by struct itself.
>> * @ch: IIO channels for the sensor.
>> * @odr: Output data rate register and ODR list available.
>> @@ -179,6 +180,7 @@ struct st_sensor_transfer_function {
>> */
>> struct st_sensor_settings {
>> u8 wai;
>> + u8 wai_addr;
>> char sensors_supported[ST_SENSORS_MAX_4WAI][ST_SENSORS_MAX_NAME];
>> struct iio_chan_spec *ch;
>> int num_ch;
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-07-23 19:36 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-21 8:35 [PATCH V4 0/5] Added ST LSM303AGR sensor Giuseppe Barba
2015-07-21 8:35 ` [PATCH V4 1/5] iio: st-sensors: add configuration for WhoAmI address Giuseppe Barba
2015-07-21 10:43 ` Denis Ciocca
2015-07-23 19:36 ` Jonathan Cameron [this message]
2015-07-21 8:35 ` [PATCH V4 2/5] iio: st-sensors: add support for single full scale device Giuseppe Barba
2015-07-21 10:44 ` Denis Ciocca
2015-07-21 8:35 ` [PATCH V4 3/5] iio: st_magn: Add irq trigger handling Giuseppe Barba
2015-07-21 10:44 ` Denis Ciocca
2015-07-21 8:35 ` [PATCH V4 4/5] iio: st-accel: add support for lsm303agr accelerometer Giuseppe Barba
2015-07-21 10:44 ` Denis Ciocca
2015-07-23 19:40 ` Jonathan Cameron
2015-07-21 8:35 ` [PATCH V4 5/5] iio: st-magn: add support for lsm303agr magnetometer Giuseppe Barba
2015-07-21 10:44 ` Denis Ciocca
2015-07-23 19:42 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55B14221.5080909@kernel.org \
--to=jic23@kernel.org \
--cc=denis.ciocca@st.com \
--cc=giuseppe.barba@st.com \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).