From: Jonathan Cameron <jic23@kernel.org>
To: Denis Ciocca <denis.ciocca@st.com>,
Giuseppe BARBA <giuseppe.barba@st.com>,
"linux-iio@vger.kernel.org" <linux-iio@vger.kernel.org>
Subject: Re: [PATCH V4 4/5] iio: st-accel: add support for lsm303agr accelerometer
Date: Thu, 23 Jul 2015 20:40:06 +0100 [thread overview]
Message-ID: <55B14316.9030507@kernel.org> (raw)
In-Reply-To: <55AE228A.2080505@st.com>
On 21/07/15 11:44, Denis Ciocca wrote:
> Acked-by: Denis Ciocca <denis.ciocca@st.com>
Applied.
>
>
> On 07/21/2015 04:35 PM, Giuseppe BARBA wrote:
>> This adds support for the lsm303agr accelerometer.
>>
>> Signed-off-by: Giuseppe Barba <giuseppe.barba@st.com>
>> ---
>> Documentation/devicetree/bindings/iio/st-sensors.txt | 1 +
>> drivers/iio/accel/st_accel.h | 1 +
>> drivers/iio/accel/st_accel_core.c | 1 +
>> drivers/iio/accel/st_accel_i2c.c | 5 +++++
>> drivers/iio/accel/st_accel_spi.c | 1 +
>> 5 files changed, 9 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt
>> index 8a6be3b..d80bdaa 100644
>> --- a/Documentation/devicetree/bindings/iio/st-sensors.txt
>> +++ b/Documentation/devicetree/bindings/iio/st-sensors.txt
>> @@ -35,6 +35,7 @@ Accelerometers:
>> - st,lsm303dl-accel
>> - st,lsm303dlm-accel
>> - st,lsm330-accel
>> +- st,lsm303agr-accel
>> Gyroscopes:
>> - st,l3g4200d-gyro
>> diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h
>> index aa10019..468f21f 100644
>> --- a/drivers/iio/accel/st_accel.h
>> +++ b/drivers/iio/accel/st_accel.h
>> @@ -26,6 +26,7 @@
>> #define LSM303DLH_ACCEL_DEV_NAME "lsm303dlh_accel"
>> #define LSM303DLM_ACCEL_DEV_NAME "lsm303dlm_accel"
>> #define LSM330_ACCEL_DEV_NAME "lsm330_accel"
>> +#define LSM303AGR_ACCEL_DEV_NAME "lsm303agr_accel"
>> /**
>> * struct st_sensors_platform_data - default accel platform data
>> diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
>> index 12b42f6..ff30f88 100644
>> --- a/drivers/iio/accel/st_accel_core.c
>> +++ b/drivers/iio/accel/st_accel_core.c
>> @@ -233,6 +233,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
>> [2] = LSM330D_ACCEL_DEV_NAME,
>> [3] = LSM330DL_ACCEL_DEV_NAME,
>> [4] = LSM330DLC_ACCEL_DEV_NAME,
>> + [5] = LSM303AGR_ACCEL_DEV_NAME,
>> },
>> .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
>> .odr = {
>> diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
>> index a2f1c20..8b9cc84 100644
>> --- a/drivers/iio/accel/st_accel_i2c.c
>> +++ b/drivers/iio/accel/st_accel_i2c.c
>> @@ -68,6 +68,10 @@ static const struct of_device_id st_accel_of_match[] = {
>> .compatible = "st,lsm330-accel",
>> .data = LSM330_ACCEL_DEV_NAME,
>> },
>> + {
>> + .compatible = "st,lsm303agr-accel",
>> + .data = LSM303AGR_ACCEL_DEV_NAME,
>> + },
>> {},
>> };
>> MODULE_DEVICE_TABLE(of, st_accel_of_match);
>> @@ -116,6 +120,7 @@ static const struct i2c_device_id st_accel_id_table[] = {
>> { LSM303DL_ACCEL_DEV_NAME },
>> { LSM303DLM_ACCEL_DEV_NAME },
>> { LSM330_ACCEL_DEV_NAME },
>> + { LSM303AGR_ACCEL_DEV_NAME },
>> {},
>> };
>> MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
>> diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
>> index 12ec293..54b61a3 100644
>> --- a/drivers/iio/accel/st_accel_spi.c
>> +++ b/drivers/iio/accel/st_accel_spi.c
>> @@ -57,6 +57,7 @@ static const struct spi_device_id st_accel_id_table[] = {
>> { LSM303DL_ACCEL_DEV_NAME },
>> { LSM303DLM_ACCEL_DEV_NAME },
>> { LSM330_ACCEL_DEV_NAME },
>> + { LSM303AGR_ACCEL_DEV_NAME },
>> {},
>> };
>> MODULE_DEVICE_TABLE(spi, st_accel_id_table);
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-07-23 19:40 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-21 8:35 [PATCH V4 0/5] Added ST LSM303AGR sensor Giuseppe Barba
2015-07-21 8:35 ` [PATCH V4 1/5] iio: st-sensors: add configuration for WhoAmI address Giuseppe Barba
2015-07-21 10:43 ` Denis Ciocca
2015-07-23 19:36 ` Jonathan Cameron
2015-07-21 8:35 ` [PATCH V4 2/5] iio: st-sensors: add support for single full scale device Giuseppe Barba
2015-07-21 10:44 ` Denis Ciocca
2015-07-21 8:35 ` [PATCH V4 3/5] iio: st_magn: Add irq trigger handling Giuseppe Barba
2015-07-21 10:44 ` Denis Ciocca
2015-07-21 8:35 ` [PATCH V4 4/5] iio: st-accel: add support for lsm303agr accelerometer Giuseppe Barba
2015-07-21 10:44 ` Denis Ciocca
2015-07-23 19:40 ` Jonathan Cameron [this message]
2015-07-21 8:35 ` [PATCH V4 5/5] iio: st-magn: add support for lsm303agr magnetometer Giuseppe Barba
2015-07-21 10:44 ` Denis Ciocca
2015-07-23 19:42 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55B14316.9030507@kernel.org \
--to=jic23@kernel.org \
--cc=denis.ciocca@st.com \
--cc=giuseppe.barba@st.com \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).