Re: [PATCH v4 2/2] iio: bmg160: Add SPI driver

[Jonathan Cameron <jic23@kernel.org>]

On 19/08/15 13:12, Markus Pargmann wrote:
> Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Applied to the togreg branch of iio.git - initially pushed out as testing
for the autobuilders to play with it.

Thanks,

Jonathan
> ---
>  drivers/iio/gyro/Kconfig      |  7 +++++-
>  drivers/iio/gyro/Makefile     |  1 +
>  drivers/iio/gyro/bmg160_spi.c | 57 +++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 64 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/iio/gyro/bmg160_spi.c
> 
> diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig
> index 94526b13d49f..e816d29d6a62 100644
> --- a/drivers/iio/gyro/Kconfig
> +++ b/drivers/iio/gyro/Kconfig
> @@ -56,18 +56,23 @@ config BMG160
>  	select IIO_BUFFER
>  	select IIO_TRIGGERED_BUFFER
>  	select BMG160_I2C if (I2C)
> +	select BMG160_SPI if (SPI)
>  	help
>  	  Say yes here to build support for BOSCH BMG160 Tri-axis Gyro Sensor
>  	  driver connected via I2C or SPI. This driver also supports BMI055
>  	  gyroscope.
>  
>  	  This driver can also be built as a module.  If so, the module
> -	  will be called bmg160_i2c.
> +	  will be called bmg160_i2c or bmg160_spi.
>  
>  config BMG160_I2C
>  	tristate
>  	select REGMAP_I2C
>  
> +config BMG160_SPI
> +	tristate
> +	select REGMAP_SPI
> +
>  config HID_SENSOR_GYRO_3D
>  	depends on HID_SENSOR_HUB
>  	select IIO_BUFFER
> diff --git a/drivers/iio/gyro/Makefile b/drivers/iio/gyro/Makefile
> index 608401041550..f866a4be0667 100644
> --- a/drivers/iio/gyro/Makefile
> +++ b/drivers/iio/gyro/Makefile
> @@ -10,6 +10,7 @@ obj-$(CONFIG_ADIS16260) += adis16260.o
>  obj-$(CONFIG_ADXRS450) += adxrs450.o
>  obj-$(CONFIG_BMG160) += bmg160_core.o
>  obj-$(CONFIG_BMG160_I2C) += bmg160_i2c.o
> +obj-$(CONFIG_BMG160_SPI) += bmg160_spi.o
>  
>  obj-$(CONFIG_HID_SENSOR_GYRO_3D) += hid-sensor-gyro-3d.o
>  
> diff --git a/drivers/iio/gyro/bmg160_spi.c b/drivers/iio/gyro/bmg160_spi.c
> new file mode 100644
> index 000000000000..021ea5fe6a37
> --- /dev/null
> +++ b/drivers/iio/gyro/bmg160_spi.c
> @@ -0,0 +1,57 @@
> +#include <linux/spi/spi.h>
> +#include <linux/regmap.h>
> +#include <linux/iio/iio.h>
> +#include <linux/module.h>
> +
> +#include "bmg160.h"
> +
> +static const struct regmap_config bmg160_regmap_spi_conf = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +	.max_register = 0x3f,
> +};
> +
> +static int bmg160_spi_probe(struct spi_device *spi)
> +{
> +	struct regmap *regmap;
> +	const struct spi_device_id *id = spi_get_device_id(spi);
> +
> +	regmap = devm_regmap_init_spi(spi, &bmg160_regmap_spi_conf);
> +	if (IS_ERR(regmap)) {
> +		dev_err(&spi->dev, "Failed to register spi regmap %d\n",
> +			(int)PTR_ERR(regmap));
> +		return PTR_ERR(regmap);
> +	}
> +
> +	return bmg160_core_probe(&spi->dev, regmap, spi->irq, id->name);
> +}
> +
> +static int bmg160_spi_remove(struct spi_device *spi)
> +{
> +	bmg160_core_remove(&spi->dev);
> +
> +	return 0;
> +}
> +
> +static const struct spi_device_id bmg160_spi_id[] = {
> +	{"bmg160", 0},
> +	{"bmi055_gyro", 0},
> +	{}
> +};
> +
> +MODULE_DEVICE_TABLE(spi, bmg160_spi_id);
> +
> +static struct spi_driver bmg160_spi_driver = {
> +	.driver = {
> +		.name	= "bmg160_spi",
> +		.pm	= &bmg160_pm_ops,
> +	},
> +	.probe		= bmg160_spi_probe,
> +	.remove		= bmg160_spi_remove,
> +	.id_table	= bmg160_spi_id,
> +};
> +module_spi_driver(bmg160_spi_driver);
> +
> +MODULE_AUTHOR("Markus Pargmann <mpa@pengutronix.de>");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("BMG160 SPI Gyro driver");
>