Re: [PATCH 1/6] iio:dac:m62332: share scale and offset

[Jonathan Cameron <jic23@kernel.org>]

On 28/08/15 22:59, Hartmut Knaack wrote:
> This device simply uses its Vcc as reference voltage, so the same scale
> applies for all channels. Also offset doesn't appear to be different for
> any channel. Represent this by switching these two attributes to
> info_mask_shared_by_type.
> 
> Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Applied to the togreg branch of iio.git.

Thanks,

Jonathan
> ---
> Hope you don't mind too much, that I inserted an extra tab in the whole
> block rather than messing up style and cleaning it up later.
> 
>  drivers/iio/dac/m62332.c | 18 +++++++++---------
>  1 file changed, 9 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/iio/dac/m62332.c b/drivers/iio/dac/m62332.c
> index c23d7fa889ee..cffc0630ed32 100644
> --- a/drivers/iio/dac/m62332.c
> +++ b/drivers/iio/dac/m62332.c
> @@ -173,15 +173,15 @@ static const struct iio_info m62332_info = {
>  	.driver_module = THIS_MODULE,
>  };
>  
> -#define M62332_CHANNEL(chan) {				\
> -	.type = IIO_VOLTAGE,				\
> -	.indexed = 1,					\
> -	.output = 1,					\
> -	.channel = (chan),				\
> -	.datasheet_name = "CH" #chan,			\
> -	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |	\
> -		BIT(IIO_CHAN_INFO_SCALE) |		\
> -		BIT(IIO_CHAN_INFO_OFFSET),		\
> +#define M62332_CHANNEL(chan) {					\
> +	.type = IIO_VOLTAGE,					\
> +	.indexed = 1,						\
> +	.output = 1,						\
> +	.channel = (chan),					\
> +	.datasheet_name = "CH" #chan,				\
> +	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
> +	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |	\
> +				    BIT(IIO_CHAN_INFO_OFFSET),	\
>  }
>  
>  static const struct iio_chan_spec m62332_channels[M62332_CHANNELS] = {
>