From: Jonathan Cameron <jic23@kernel.org>
To: Akinobu Mita <akinobu.mita@gmail.com>, linux-iio@vger.kernel.org
Cc: Oskar Andero <oskar.andero@gmail.com>,
Hartmut Knaack <knaack.h@gmx.de>,
Lars-Peter Clausen <lars@metafoo.de>,
Peter Meerwald <pmeerw@pmeerw.net>
Subject: Re: [PATCH] iio: adc: mcp320x: support more differential voltage measurement
Date: Sat, 16 Jan 2016 13:04:55 +0000 [thread overview]
Message-ID: <569A3FF7.4040809@kernel.org> (raw)
In-Reply-To: <56913539.2080904@kernel.org>
On 09/01/16 16:28, Jonathan Cameron wrote:
> On 07/01/16 15:40, Akinobu Mita wrote:
>> mcp320x driver supports the pseudo-differential mode by
>> in_voltage'IN+'-voltage'IN-'_raw where (IN+, IN-) = (0, 1), (2, 3), ...
>>
>> mcp320x chips except MCP3X01 can also select swapped IN+ and IN-
>> pairs in the pseudo-differential mode.
>> i.e. in_voltage'IN+'-voltage'IN-'_raw where (IN+, IN-) = (1, 0),
>> (3, 2), ...
>>
>> If the voltage level of IN+ is equal to or less than IN-, the
>> resultant code will be 000h. So it is useful to provide these, too.
>>
>> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
>> Cc: Oskar Andero <oskar.andero@gmail.com>
>> Cc: Jonathan Cameron <jic23@kernel.org>
>> Cc: Hartmut Knaack <knaack.h@gmx.de>
>> Cc: Lars-Peter Clausen <lars@metafoo.de>
>> Cc: Peter Meerwald <pmeerw@pmeerw.net>
>> Cc: linux-iio@vger.kernel.org
> Looks good to me. Will let it sit for a while longer on the list
> as we have lots of time at this point in a kernel cycle (new one
> has just started as far as IIO is concerned)
>
Applied to the togreg branch of iio.git - initially pushed out
as testing for the autobuilders to play with it.
Thanks,
Jonathan
> Jonathan
>> ---
>> drivers/iio/adc/mcp320x.c | 31 +++++++++++++++++++------------
>> 1 file changed, 19 insertions(+), 12 deletions(-)
>>
>> diff --git a/drivers/iio/adc/mcp320x.c b/drivers/iio/adc/mcp320x.c
>> index 8569c8e..a9c4acd 100644
>> --- a/drivers/iio/adc/mcp320x.c
>> +++ b/drivers/iio/adc/mcp320x.c
>> @@ -187,26 +187,27 @@ out:
>> .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \
>> }
>>
>> -#define MCP320X_VOLTAGE_CHANNEL_DIFF(num) \
>> +#define MCP320X_VOLTAGE_CHANNEL_DIFF(chan1, chan2) \
>> { \
>> .type = IIO_VOLTAGE, \
>> .indexed = 1, \
>> - .channel = (num * 2), \
>> - .channel2 = (num * 2 + 1), \
>> - .address = (num * 2), \
>> + .channel = (chan1), \
>> + .channel2 = (chan2), \
>> + .address = (chan1), \
>> .differential = 1, \
>> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
>> .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \
>> }
>>
>> static const struct iio_chan_spec mcp3201_channels[] = {
>> - MCP320X_VOLTAGE_CHANNEL_DIFF(0),
>> + MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1),
>> };
>>
>> static const struct iio_chan_spec mcp3202_channels[] = {
>> MCP320X_VOLTAGE_CHANNEL(0),
>> MCP320X_VOLTAGE_CHANNEL(1),
>> - MCP320X_VOLTAGE_CHANNEL_DIFF(0),
>> + MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1),
>> + MCP320X_VOLTAGE_CHANNEL_DIFF(1, 0),
>> };
>>
>> static const struct iio_chan_spec mcp3204_channels[] = {
>> @@ -214,8 +215,10 @@ static const struct iio_chan_spec mcp3204_channels[] = {
>> MCP320X_VOLTAGE_CHANNEL(1),
>> MCP320X_VOLTAGE_CHANNEL(2),
>> MCP320X_VOLTAGE_CHANNEL(3),
>> - MCP320X_VOLTAGE_CHANNEL_DIFF(0),
>> - MCP320X_VOLTAGE_CHANNEL_DIFF(1),
>> + MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1),
>> + MCP320X_VOLTAGE_CHANNEL_DIFF(1, 0),
>> + MCP320X_VOLTAGE_CHANNEL_DIFF(2, 3),
>> + MCP320X_VOLTAGE_CHANNEL_DIFF(3, 2),
>> };
>>
>> static const struct iio_chan_spec mcp3208_channels[] = {
>> @@ -227,10 +230,14 @@ static const struct iio_chan_spec mcp3208_channels[] = {
>> MCP320X_VOLTAGE_CHANNEL(5),
>> MCP320X_VOLTAGE_CHANNEL(6),
>> MCP320X_VOLTAGE_CHANNEL(7),
>> - MCP320X_VOLTAGE_CHANNEL_DIFF(0),
>> - MCP320X_VOLTAGE_CHANNEL_DIFF(1),
>> - MCP320X_VOLTAGE_CHANNEL_DIFF(2),
>> - MCP320X_VOLTAGE_CHANNEL_DIFF(3),
>> + MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1),
>> + MCP320X_VOLTAGE_CHANNEL_DIFF(1, 0),
>> + MCP320X_VOLTAGE_CHANNEL_DIFF(2, 3),
>> + MCP320X_VOLTAGE_CHANNEL_DIFF(3, 2),
>> + MCP320X_VOLTAGE_CHANNEL_DIFF(4, 5),
>> + MCP320X_VOLTAGE_CHANNEL_DIFF(5, 4),
>> + MCP320X_VOLTAGE_CHANNEL_DIFF(6, 7),
>> + MCP320X_VOLTAGE_CHANNEL_DIFF(7, 6),
>> };
>>
>> static const struct iio_info mcp320x_info = {
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
prev parent reply other threads:[~2016-01-16 13:04 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-07 15:40 [PATCH] iio: adc: mcp320x: support more differential voltage measurement Akinobu Mita
2016-01-09 16:28 ` Jonathan Cameron
2016-01-16 13:04 ` Jonathan Cameron [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=569A3FF7.4040809@kernel.org \
--to=jic23@kernel.org \
--cc=akinobu.mita@gmail.com \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=oskar.andero@gmail.com \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).