From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from saturn.retrosnub.co.uk ([178.18.118.26]:53553 "EHLO saturn.retrosnub.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756912AbcA3QMh (ORCPT ); Sat, 30 Jan 2016 11:12:37 -0500 Subject: Re: [PATCH 2/2] iio: si7005: add support for Hoperf th02 To: Daniel Baluta , Matt Ranostay References: <1453839667-3626-1-git-send-email-cristina.moraru09@gmail.com> Cc: Cristina Moraru , Hartmut Knaack , Lars-Peter Clausen , Peter Meerwald-Stadler , Ludovic Tancerel , geert@linux-m68k.org, =?UTF-8?Q?Krzysztof_Koz=c5=82owski?= , "linux-kernel@vger.kernel.org" , "linux-iio@vger.kernel.org" , "octavian.purdila@intel.com" From: Jonathan Cameron Message-ID: <56ACE0F3.30708@kernel.org> Date: Sat, 30 Jan 2016 16:12:35 +0000 MIME-Version: 1.0 In-Reply-To: Content-Type: text/plain; charset=utf-8 Sender: linux-iio-owner@vger.kernel.org List-Id: linux-iio@vger.kernel.org On 27/01/16 09:13, Daniel Baluta wrote: > On Wed, Jan 27, 2016 at 12:56 AM, Matt Ranostay wrote: >> On Tue, Jan 26, 2016 at 12:21 PM, Cristina Moraru >> wrote: >>> This patch adds support for Hoperf th02 humidity and >>> temperature sensor as it uses same register definitions >>> as si7005 >>> >>> th02 Datasheet: http://www.anglia-live.com/netalogue/pdfs/hrf/datasheets/TH02_V1.1.pdf >>> >>> Signed-off-by: Cristina Moraru >>> --- >>> drivers/iio/humidity/Kconfig | 3 ++- >>> drivers/iio/humidity/si7005.c | 1 + >>> 2 files changed, 3 insertions(+), 1 deletion(-) >>> >>> diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig >>> index c1f3a21..866dda1 100644 >>> --- a/drivers/iio/humidity/Kconfig >>> +++ b/drivers/iio/humidity/Kconfig >>> @@ -43,7 +43,8 @@ config SI7005 >>> humidity and temperature sensor. >>> >>> To compile this driver as a module, choose M here: the module >>> - will be called si7005. >>> + will be called si7005. This driver also >>> + supports Hoperf TH02 Humidity and Temperature Sensor. >> >> This probably shouldn't be changing the Kconfig description. Since if >> every driver added a line for each device/variant it supported >> everything would get quite wordy. > > Wordy is good :). We usually add all the supported chips in the Kconfig. > See for example entries for BMC150_ACCEL or IIO_ST_ACCEL_3AXIS. Absolutely - never mind burning words that are hidden under help ;) Jonathan > > thanks, > Daniel. > -- > To unsubscribe from this list: send the line "unsubscribe linux-iio" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html >