linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Adriana Reus <adriana.reus@intel.com>
To: Jonathan Cameron <jic23@kernel.org>
Cc: linux-iio@vger.kernel.org, srinivas.pandruvada@linux.intel.com,
	ggao@invensense.com
Subject: Re: [RFC PATCH 0/5] iio: imu: inv_mpu6050: Split driver into core and I2C/SPI functionality
Date: Mon, 1 Feb 2016 11:01:27 +0200	[thread overview]
Message-ID: <56AF1EE7.7010900@intel.com> (raw)
In-Reply-To: <56ACEEBE.20701@kernel.org>

Hi,

Thanks for your comments on this series, I'll resend a new version
soon.
It was an RFC because I've done some slight rebasing and shuffling
around between my last tested version of this series and what was
sent out and I wanted to make sure I can give it a final test run
before it gets merged.
As testing goes, I am using an mpu6050 to test the i2c part and an
mpu6000 to test the spi part.

Thanks,
Adriana

On 30.01.2016 19:11, Jonathan Cameron wrote:
> On 30/01/16 09:43, Adriana Reus wrote:
>> This series splits this driver into general and I2C/SPI specific funtionality.
> functionality.
>> The first patch is a fix for a bug in the interrupt pin configuration.
>> The second patch is a minor clean up in preparation for the split.
>> The third patch changes all the I2C specific calls into regmap calls.
>> The third patch separated the remaining I2C specific part into a different component.
>> Finally the fourth patch adds SPI support for the MPU6000 chip.
> If sending an RFC, always state why you think it is not ready to merge
> right now.
>
> Jonathan
>>
>> Adriana Reus (5):
>>    iio: imu: inv-mpu6050: Fix interrupt pin configuration
>>    iio: inv_mpu6050: Remove unused parameter
>>    iio: imu: inv_mpu6050: Use regmap instead of i2c specific functions
>>    iio: imu: inv_mpu6050: Separate driver into core and i2c
>>      functionality.
>>    iio: imu: inv_mpu6050: Add SPI support for MPU6000
>>
>>   drivers/iio/imu/inv_mpu6050/Kconfig           |  15 +-
>>   drivers/iio/imu/inv_mpu6050/Makefile          |   8 +-
>>   drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c    |  14 +-
>>   drivers/iio/imu/inv_mpu6050/inv_mpu_core.c    | 259 ++++++--------------------
>>   drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c     | 209 +++++++++++++++++++++
>>   drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h     |  15 +-
>>   drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c    |  34 ++--
>>   drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c     |  80 ++++++++
>>   drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c |  10 +-
>>   9 files changed, 402 insertions(+), 242 deletions(-)
>>   create mode 100644 drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
>>   create mode 100644 drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
>>
>

  reply	other threads:[~2016-02-01  9:01 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-30  9:43 [RFC PATCH 0/5] iio: imu: inv_mpu6050: Split driver into core and I2C/SPI functionality Adriana Reus
2016-01-30  9:43 ` [PATCH 1/5] iio: imu: inv-mpu6050: Fix interrupt pin configuration Adriana Reus
2016-01-30 17:16   ` Jonathan Cameron
2016-01-30  9:43 ` [PATCH 2/5] iio: inv_mpu6050: Remove unused parameter Adriana Reus
2016-01-30 17:18   ` Jonathan Cameron
2016-01-30  9:43 ` [RFC PATCH 3/5] iio: imu: inv_mpu6050: Use regmap instead of i2c specific functions Adriana Reus
2016-01-30 17:21   ` Jonathan Cameron
2016-01-30  9:43 ` [RFC PATCH 4/5] iio: imu: inv_mpu6050: Separate driver into core and i2c functionality Adriana Reus
2016-01-30 17:37   ` Jonathan Cameron
2016-01-30  9:43 ` [RFC PATCH 5/5] iio: imu: inv_mpu6050: Add SPI support for MPU6000 Adriana Reus
2016-01-30 17:48   ` Jonathan Cameron
2016-01-30 17:11 ` [RFC PATCH 0/5] iio: imu: inv_mpu6050: Split driver into core and I2C/SPI functionality Jonathan Cameron
2016-02-01  9:01   ` Adriana Reus [this message]
2016-02-02  1:11     ` Ge Gao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56AF1EE7.7010900@intel.com \
    --to=adriana.reus@intel.com \
    --cc=ggao@invensense.com \
    --cc=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=srinivas.pandruvada@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).