* [PATCH] iio:pressure:Kconfig white space cleanup.
@ 2016-01-24 17:06 Jonathan Cameron
2016-02-01 19:57 ` Jonathan Cameron
0 siblings, 1 reply; 2+ messages in thread
From: Jonathan Cameron @ 2016-01-24 17:06 UTC (permalink / raw)
To: linux-iio; +Cc: Jonathan Cameron
Clearly a high degree of cut and paste has gone on in this file, propogating
a particularly random combination of tabs and spaces. This patch at least
should make it all consistent going forward.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
---
drivers/iio/pressure/Kconfig | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
index e8f60dbf646e..cf03a43545a1 100644
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@@ -10,11 +10,11 @@ config BMP280
depends on I2C
select REGMAP_I2C
help
- Say yes here to build support for Bosch Sensortec BMP280
- pressure and temperature sensor.
+ Say yes here to build support for Bosch Sensortec BMP280
+ pressure and temperature sensor.
- To compile this driver as a module, choose M here: the module
- will be called bmp280.
+ To compile this driver as a module, choose M here: the module
+ will be called bmp280.
config HID_SENSOR_PRESS
depends on HID_SENSOR_HUB
@@ -27,8 +27,8 @@ config HID_SENSOR_PRESS
Say yes here to build support for the HID SENSOR
Pressure driver
- To compile this driver as a module, choose M here: the module
- will be called hid-sensor-press.
+ To compile this driver as a module, choose M here: the module
+ will be called hid-sensor-press.
config MPL115
tristate
@@ -41,8 +41,8 @@ config MPL115_I2C
Say yes here to build support for the Freescale MPL115A2
pressure sensor connected via I2C.
- To compile this driver as a module, choose M here: the module
- will be called mpl115_i2c.
+ To compile this driver as a module, choose M here: the module
+ will be called mpl115_i2c.
config MPL115_SPI
tristate "Freescale MPL115A1 pressure sensor driver"
@@ -52,8 +52,8 @@ config MPL115_SPI
Say yes here to build support for the Freescale MPL115A1
pressure sensor connected via SPI.
- To compile this driver as a module, choose M here: the module
- will be called mpl115_spi.
+ To compile this driver as a module, choose M here: the module
+ will be called mpl115_spi.
config MPL3115
tristate "Freescale MPL3115A2 pressure sensor driver"
@@ -64,8 +64,8 @@ config MPL3115
Say yes here to build support for the Freescale MPL3115A2
pressure sensor / altimeter.
- To compile this driver as a module, choose M here: the module
- will be called mpl3115.
+ To compile this driver as a module, choose M here: the module
+ will be called mpl3115.
config MS5611
tristate "Measurement Specialties MS5611 pressure sensor driver"
@@ -97,7 +97,7 @@ config MS5611_SPI
config MS5637
tristate "Measurement Specialties MS5637 pressure & temperature sensor"
depends on I2C
- select IIO_MS_SENSORS_I2C
+ select IIO_MS_SENSORS_I2C
help
If you say yes here you get support for the Measurement Specialties
MS5637 pressure and temperature sensor.
@@ -143,7 +143,7 @@ config T5403
Say yes here to build support for the EPCOS T5403 pressure sensor
connected via I2C.
- To compile this driver as a module, choose M here: the module
- will be called t5403.
+ To compile this driver as a module, choose M here: the module
+ will be called t5403.
endmenu
--
2.6.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] iio:pressure:Kconfig white space cleanup.
2016-01-24 17:06 [PATCH] iio:pressure:Kconfig white space cleanup Jonathan Cameron
@ 2016-02-01 19:57 ` Jonathan Cameron
0 siblings, 0 replies; 2+ messages in thread
From: Jonathan Cameron @ 2016-02-01 19:57 UTC (permalink / raw)
To: linux-iio
On 24/01/16 17:06, Jonathan Cameron wrote:
> Clearly a high degree of cut and paste has gone on in this file, propogating
> a particularly random combination of tabs and spaces. This patch at least
> should make it all consistent going forward.
>
> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Ooops, I replied to just myself on Saturday that I'd applied this.
Anyhow, applied ;)
> ---
> drivers/iio/pressure/Kconfig | 30 +++++++++++++++---------------
> 1 file changed, 15 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
> index e8f60dbf646e..cf03a43545a1 100644
> --- a/drivers/iio/pressure/Kconfig
> +++ b/drivers/iio/pressure/Kconfig
> @@ -10,11 +10,11 @@ config BMP280
> depends on I2C
> select REGMAP_I2C
> help
> - Say yes here to build support for Bosch Sensortec BMP280
> - pressure and temperature sensor.
> + Say yes here to build support for Bosch Sensortec BMP280
> + pressure and temperature sensor.
>
> - To compile this driver as a module, choose M here: the module
> - will be called bmp280.
> + To compile this driver as a module, choose M here: the module
> + will be called bmp280.
>
> config HID_SENSOR_PRESS
> depends on HID_SENSOR_HUB
> @@ -27,8 +27,8 @@ config HID_SENSOR_PRESS
> Say yes here to build support for the HID SENSOR
> Pressure driver
>
> - To compile this driver as a module, choose M here: the module
> - will be called hid-sensor-press.
> + To compile this driver as a module, choose M here: the module
> + will be called hid-sensor-press.
>
> config MPL115
> tristate
> @@ -41,8 +41,8 @@ config MPL115_I2C
> Say yes here to build support for the Freescale MPL115A2
> pressure sensor connected via I2C.
>
> - To compile this driver as a module, choose M here: the module
> - will be called mpl115_i2c.
> + To compile this driver as a module, choose M here: the module
> + will be called mpl115_i2c.
>
> config MPL115_SPI
> tristate "Freescale MPL115A1 pressure sensor driver"
> @@ -52,8 +52,8 @@ config MPL115_SPI
> Say yes here to build support for the Freescale MPL115A1
> pressure sensor connected via SPI.
>
> - To compile this driver as a module, choose M here: the module
> - will be called mpl115_spi.
> + To compile this driver as a module, choose M here: the module
> + will be called mpl115_spi.
>
> config MPL3115
> tristate "Freescale MPL3115A2 pressure sensor driver"
> @@ -64,8 +64,8 @@ config MPL3115
> Say yes here to build support for the Freescale MPL3115A2
> pressure sensor / altimeter.
>
> - To compile this driver as a module, choose M here: the module
> - will be called mpl3115.
> + To compile this driver as a module, choose M here: the module
> + will be called mpl3115.
>
> config MS5611
> tristate "Measurement Specialties MS5611 pressure sensor driver"
> @@ -97,7 +97,7 @@ config MS5611_SPI
> config MS5637
> tristate "Measurement Specialties MS5637 pressure & temperature sensor"
> depends on I2C
> - select IIO_MS_SENSORS_I2C
> + select IIO_MS_SENSORS_I2C
> help
> If you say yes here you get support for the Measurement Specialties
> MS5637 pressure and temperature sensor.
> @@ -143,7 +143,7 @@ config T5403
> Say yes here to build support for the EPCOS T5403 pressure sensor
> connected via I2C.
>
> - To compile this driver as a module, choose M here: the module
> - will be called t5403.
> + To compile this driver as a module, choose M here: the module
> + will be called t5403.
>
> endmenu
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-02-01 19:57 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-01-24 17:06 [PATCH] iio:pressure:Kconfig white space cleanup Jonathan Cameron
2016-02-01 19:57 ` Jonathan Cameron
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).