From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from saturn.retrosnub.co.uk ([178.18.118.26]:41263 "EHLO saturn.retrosnub.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752591AbcBFSvQ (ORCPT ); Sat, 6 Feb 2016 13:51:16 -0500 Subject: Re: [PATCH v5 1/4] Documentation: afe4404: Add DT bindings for the AFE4404 heart monitor To: "Andrew F. Davis" , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Hartmut Knaack , Lars-Peter Clausen , Peter Meerwald References: <1454435446-20586-1-git-send-email-afd@ti.com> <1454435446-20586-2-git-send-email-afd@ti.com> Cc: devicetree@vger.kernel.org, linux-iio@vger.kernel.org, linux-api@vger.kernel.org, linux-kernel@vger.kernel.org From: Jonathan Cameron Message-ID: <56B6409D.1030501@kernel.org> Date: Sat, 6 Feb 2016 18:51:09 +0000 MIME-Version: 1.0 In-Reply-To: <1454435446-20586-2-git-send-email-afd@ti.com> Content-Type: text/plain; charset=windows-1252 Sender: linux-iio-owner@vger.kernel.org List-Id: linux-iio@vger.kernel.org On 02/02/16 17:50, Andrew F. Davis wrote: > Add the TI afe4404 heart monitor DT bindings documentation. > Create health directory created under iio. > > Signed-off-by: Andrew F. Davis Nothing terribly controversial in here I think and its been around in roughly this form for a long time so I'm applying this now. Applied to the togreg branch of iio.git - initially pushed out as testing for the autobuilders to test the other patches in the series. Jonathan > --- > .../devicetree/bindings/iio/health/afe4404.txt | 30 ++++++++++++++++++++++ > 1 file changed, 30 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/health/afe4404.txt > > diff --git a/Documentation/devicetree/bindings/iio/health/afe4404.txt b/Documentation/devicetree/bindings/iio/health/afe4404.txt > new file mode 100644 > index 0000000..de69f20 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/health/afe4404.txt > @@ -0,0 +1,30 @@ > +Texas Instruments AFE4404 Heart rate and Pulse Oximeter > + > +Required properties: > + - compatible : Should be "ti,afe4404". > + - reg : I2C address of the device. > + - tx-supply : Regulator supply to transmitting LEDs. > + - interrupt-parent : Phandle to he parent interrupt controller. > + - interrupts : The interrupt line the device ADC_RDY pin is > + connected to. For details refer to, > + ../interrupt-controller/interrupts.txt. > + > +Optional properties: > + - reset-gpios : GPIO used to reset the device. > + For details refer to, ../gpio/gpio.txt. > + > +Example: > + > +&i2c2 { > + heart_mon@58 { > + compatible = "ti,afe4404"; > + reg = <0x58>; > + > + tx-supply = <&vbat>; > + > + interrupt-parent = <&gpio1>; > + interrupts = <28 IRQ_TYPE_EDGE_RISING>; > + > + reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; > + }; > +}; >