Re: [PATCH v2 2/4] dt: document NXP LPC1850 ADC driver bindings

[Jonathan Cameron <jic23@kernel.org>]

On 06/03/16 11:13, Joachim Eastwood wrote:
> Signed-off-by: Joachim Eastwood <manabian@gmail.com>
As this is very standard, I'm happy to take it without a device
tree ack.  I can added an ack though if anyone wants to give one!

Jonathan
> ---
>  .../devicetree/bindings/iio/adc/lpc1850-adc.txt     | 21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt b/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt
> new file mode 100644
> index 000000000000..0bcae5140bc5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt
> @@ -0,0 +1,21 @@
> +NXP LPC1850 ADC bindings
> +
> +Required properties:
> +- compatible: Should be "nxp,lpc1850-adc"
> +- reg: Offset and length of the register set for the ADC device
> +- interrupts: The interrupt number for the ADC device
> +- clocks: The root clock of the ADC controller
> +- vref-supply: The regulator supply ADC reference voltage
> +- resets: phandle to reset controller and line specifier
> +
> +Example:
> +
> +adc0: adc@400e3000 {
> +	compatible = "nxp,lpc1850-adc";
> +	reg = <0x400e3000 0x1000>;
> +	interrupts = <17>;
> +	clocks = <&ccu1 CLK_APB3_ADC0>;
> +	vref-supply = <&reg_vdda>;
> +	resets = <&rgu 40>;
> +	status = "disabled";
> +};
>