linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Alison Schofield <amsfield22@gmail.com>,
	outreachy-kernel@googlegroups.com
Cc: linux-iio@vger.kernel.org
Subject: Re: [PATCH] staging: iio: isl29028: use regmap to retrieve struct device
Date: Tue, 15 Mar 2016 22:26:03 +0000	[thread overview]
Message-ID: <56E88BFB.1050307@kernel.org> (raw)
In-Reply-To: <20160315184903.GA14115@d830.WORKGROUP>

On 15/03/16 18:49, Alison Schofield wrote:
> Driver includes struct regmap and struct device in its global data.
> Remove the struct device and use regmap API to retrieve device info.
> 
> Simplified version of Coccinelle semantic patch used:
> 
> @ a @
> identifier drvdata, r;
> position p;
> @@
>   struct drvdata@p {
>   ...
>   struct regmap *r;
>   ...
>   };
> 
> @ b @
> identifier a.drvdata, d;
> position a.p;
> @@
>   struct drvdata@p {
>   ...
> - struct device *d;
>   ...
>   };
> 
> @ passed depends on b @
> identifier a.drvdata, a.r, b.d, i, f;
> @@
>   f (..., struct drvdata *i ,...) {
> + struct device *dev = regmap_get_device(i->r);
>    <+...
> -	   i->d
> +	   dev
>    ...+>
>   }
> 
> Signed-off-by: Alison Schofield <amsfield22@gmail.com>
A good little patch, but there are probably a few formatting cleanups
that should be associated with it.  It results in shortening a few lines
to the point that 'I think' (have counted wrong before!) that the whole
functional call will now fit on one line.

Those want to be done in here as well but will be a case of editing the
result of the script to do it.  A lot of patches are a hybrid of automated
and manual edits for exactly this reason.

I've fixed up the two cases I found and applied.  An annoying number 81 characters!

Pushed out as testing for the autobuilders to play with it.

Thanks,

Jonathan
> ---
>  drivers/staging/iio/light/isl29028.c | 53 ++++++++++++++++++++----------------
>  1 file changed, 30 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/staging/iio/light/isl29028.c b/drivers/staging/iio/light/isl29028.c
> index 6e2ba45..0ef96e6 100644
> --- a/drivers/staging/iio/light/isl29028.c
> +++ b/drivers/staging/iio/light/isl29028.c
> @@ -69,7 +69,6 @@ enum als_ir_mode {
>  };
>  
>  struct isl29028_chip {
> -	struct device		*dev;
>  	struct mutex		lock;
>  	struct regmap		*regmap;
>  
> @@ -166,20 +165,21 @@ static int isl29028_set_als_ir_mode(struct isl29028_chip *chip,
>  
>  static int isl29028_read_als_ir(struct isl29028_chip *chip, int *als_ir)
>  {
> +	struct device *dev = regmap_get_device(chip->regmap);
>  	unsigned int lsb;
>  	unsigned int msb;
>  	int ret;
>  
>  	ret = regmap_read(chip->regmap, ISL29028_REG_ALSIR_L, &lsb);
>  	if (ret < 0) {
> -		dev_err(chip->dev,
> +		dev_err(dev,
>  			"Error in reading register ALSIR_L err %d\n", ret);
>  		return ret;
>  	}
>  
>  	ret = regmap_read(chip->regmap, ISL29028_REG_ALSIR_U, &msb);
>  	if (ret < 0) {
> -		dev_err(chip->dev,
> +		dev_err(dev,
>  			"Error in reading register ALSIR_U err %d\n", ret);
>  		return ret;
>  	}
> @@ -190,12 +190,13 @@ static int isl29028_read_als_ir(struct isl29028_chip *chip, int *als_ir)
>  
>  static int isl29028_read_proxim(struct isl29028_chip *chip, int *prox)
>  {
> +	struct device *dev = regmap_get_device(chip->regmap);
>  	unsigned int data;
>  	int ret;
>  
>  	ret = regmap_read(chip->regmap, ISL29028_REG_PROX_DATA, &data);
>  	if (ret < 0) {
> -		dev_err(chip->dev, "Error in reading register %d, error %d\n",
> +		dev_err(dev, "Error in reading register %d, error %d\n",
>  			ISL29028_REG_PROX_DATA, ret);
>  		return ret;
>  	}
> @@ -218,13 +219,14 @@ static int isl29028_proxim_get(struct isl29028_chip *chip, int *prox_data)
>  
>  static int isl29028_als_get(struct isl29028_chip *chip, int *als_data)
>  {
> +	struct device *dev = regmap_get_device(chip->regmap);
>  	int ret;
>  	int als_ir_data;
>  
>  	if (chip->als_ir_mode != MODE_ALS) {
>  		ret = isl29028_set_als_ir_mode(chip, MODE_ALS);
>  		if (ret < 0) {
> -			dev_err(chip->dev,
> +			dev_err(dev,
>  				"Error in enabling ALS mode err %d\n", ret);
>  			return ret;
>  		}
> @@ -251,12 +253,13 @@ static int isl29028_als_get(struct isl29028_chip *chip, int *als_data)
>  
>  static int isl29028_ir_get(struct isl29028_chip *chip, int *ir_data)
>  {
> +	struct device *dev = regmap_get_device(chip->regmap);
>  	int ret;
>  
>  	if (chip->als_ir_mode != MODE_IR) {
>  		ret = isl29028_set_als_ir_mode(chip, MODE_IR);
>  		if (ret < 0) {
> -			dev_err(chip->dev,
> +			dev_err(dev,
>  				"Error in enabling IR mode err %d\n", ret);
>  			return ret;
>  		}
> @@ -271,25 +274,26 @@ static int isl29028_write_raw(struct iio_dev *indio_dev,
>  			      int val, int val2, long mask)
>  {
>  	struct isl29028_chip *chip = iio_priv(indio_dev);
> +	struct device *dev = regmap_get_device(chip->regmap);
>  	int ret = -EINVAL;
>  
>  	mutex_lock(&chip->lock);
>  	switch (chan->type) {
>  	case IIO_PROXIMITY:
>  		if (mask != IIO_CHAN_INFO_SAMP_FREQ) {
> -			dev_err(chip->dev,
> +			dev_err(dev,
>  				"proximity: mask value 0x%08lx not supported\n",
>  				mask);
>  			break;
>  		}
>  		if (val < 1 || val > 100) {
> -			dev_err(chip->dev,
> +			dev_err(dev,
>  				"Samp_freq %d is not in range[1:100]\n", val);
>  			break;
>  		}
>  		ret = isl29028_set_proxim_sampling(chip, val);
>  		if (ret < 0) {
> -			dev_err(chip->dev,
> +			dev_err(dev,
>  				"Setting proximity samp_freq fail, err %d\n",
>  				ret);
>  			break;
> @@ -299,19 +303,19 @@ static int isl29028_write_raw(struct iio_dev *indio_dev,
>  
>  	case IIO_LIGHT:
>  		if (mask != IIO_CHAN_INFO_SCALE) {
> -			dev_err(chip->dev,
> +			dev_err(dev,
>  				"light: mask value 0x%08lx not supported\n",
>  				mask);
>  			break;
>  		}
>  		if ((val != 125) && (val != 2000)) {
> -			dev_err(chip->dev,
> +			dev_err(dev,
>  				"lux scale %d is invalid [125, 2000]\n", val);
>  			break;
>  		}
>  		ret = isl29028_set_als_scale(chip, val);
>  		if (ret < 0) {
> -			dev_err(chip->dev,
> +			dev_err(dev,
>  				"Setting lux scale fail with error %d\n", ret);
>  			break;
>  		}
> @@ -319,7 +323,7 @@ static int isl29028_write_raw(struct iio_dev *indio_dev,
>  		break;
>  
>  	default:
> -		dev_err(chip->dev, "Unsupported channel type\n");
> +		dev_err(dev, "Unsupported channel type\n");
>  		break;
>  	}
>  	mutex_unlock(&chip->lock);
> @@ -331,6 +335,7 @@ static int isl29028_read_raw(struct iio_dev *indio_dev,
>  			     int *val, int *val2, long mask)
>  {
>  	struct isl29028_chip *chip = iio_priv(indio_dev);
> +	struct device *dev = regmap_get_device(chip->regmap);
>  	int ret = -EINVAL;
>  
>  	mutex_lock(&chip->lock);
> @@ -370,7 +375,7 @@ static int isl29028_read_raw(struct iio_dev *indio_dev,
>  		break;
>  
>  	default:
> -		dev_err(chip->dev, "mask value 0x%08lx not supported\n", mask);
> +		dev_err(dev, "mask value 0x%08lx not supported\n", mask);
>  		break;
>  	}
>  	mutex_unlock(&chip->lock);
> @@ -417,6 +422,7 @@ static const struct iio_info isl29028_info = {
>  
>  static int isl29028_chip_init(struct isl29028_chip *chip)
>  {
> +	struct device *dev = regmap_get_device(chip->regmap);
>  	int ret;
>  
>  	chip->enable_prox  = false;
> @@ -426,34 +432,34 @@ static int isl29028_chip_init(struct isl29028_chip *chip)
>  
>  	ret = regmap_write(chip->regmap, ISL29028_REG_TEST1_MODE, 0x0);
>  	if (ret < 0) {
> -		dev_err(chip->dev, "%s(): write to reg %d failed, err = %d\n",
> +		dev_err(dev, "%s(): write to reg %d failed, err = %d\n",
>  			__func__, ISL29028_REG_TEST1_MODE, ret);
>  		return ret;
>  	}
>  	ret = regmap_write(chip->regmap, ISL29028_REG_TEST2_MODE, 0x0);
>  	if (ret < 0) {
> -		dev_err(chip->dev, "%s(): write to reg %d failed, err = %d\n",
> +		dev_err(dev, "%s(): write to reg %d failed, err = %d\n",
>  			__func__, ISL29028_REG_TEST2_MODE, ret);
>  		return ret;
>  	}
>  
>  	ret = regmap_write(chip->regmap, ISL29028_REG_CONFIGURE, 0x0);
>  	if (ret < 0) {
> -		dev_err(chip->dev, "%s(): write to reg %d failed, err = %d\n",
> +		dev_err(dev, "%s(): write to reg %d failed, err = %d\n",
>  			__func__, ISL29028_REG_CONFIGURE, ret);
>  		return ret;
>  	}
>  
>  	ret = isl29028_set_proxim_sampling(chip, chip->prox_sampling);
>  	if (ret < 0) {
> -		dev_err(chip->dev, "setting the proximity, err = %d\n",
> +		dev_err(dev, "setting the proximity, err = %d\n",
>  			ret);
>  		return ret;
>  	}
>  
>  	ret = isl29028_set_als_scale(chip, chip->lux_scale);
>  	if (ret < 0)
> -		dev_err(chip->dev,
> +		dev_err(dev,
>  			"setting als scale failed, err = %d\n", ret);
There are a few cases in here that I 'think' will now fit on one line
due to shortening from chip->dev to dev in the dev_err calls.

Would be nice to do this in this patch.
>  	return ret;
>  }
> @@ -496,19 +502,19 @@ static int isl29028_probe(struct i2c_client *client,
>  	chip = iio_priv(indio_dev);
>  
>  	i2c_set_clientdata(client, indio_dev);
> -	chip->dev = &client->dev;
>  	mutex_init(&chip->lock);
>  
>  	chip->regmap = devm_regmap_init_i2c(client, &isl29028_regmap_config);
>  	if (IS_ERR(chip->regmap)) {
>  		ret = PTR_ERR(chip->regmap);
> -		dev_err(chip->dev, "regmap initialization failed: %d\n", ret);
> +		dev_err(&client->dev, "regmap initialization failed: %d\n",
> +			ret);
>  		return ret;
>  	}
>  
>  	ret = isl29028_chip_init(chip);
>  	if (ret < 0) {
> -		dev_err(chip->dev, "chip initialization failed: %d\n", ret);
> +		dev_err(&client->dev, "chip initialization failed: %d\n", ret);
>  		return ret;
>  	}
>  
> @@ -520,7 +526,8 @@ static int isl29028_probe(struct i2c_client *client,
>  	indio_dev->modes = INDIO_DIRECT_MODE;
>  	ret = devm_iio_device_register(indio_dev->dev.parent, indio_dev);
>  	if (ret < 0) {
> -		dev_err(chip->dev, "iio registration fails with error %d\n",
> +		dev_err(&client->dev,
> +			"iio registration fails with error %d\n",
>  			ret);
>  		return ret;
>  	}
> 


  reply	other threads:[~2016-03-15 22:26 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-15 18:49 [PATCH] staging: iio: isl29028: use regmap to retrieve struct device Alison Schofield
2016-03-15 22:26 ` Jonathan Cameron [this message]
2016-03-15 22:38   ` Alison Schofield
2016-03-15 22:40     ` Jonathan Cameron
2016-03-15 22:43     ` [Outreachy kernel] " Julia Lawall

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56E88BFB.1050307@kernel.org \
    --to=jic23@kernel.org \
    --cc=amsfield22@gmail.com \
    --cc=linux-iio@vger.kernel.org \
    --cc=outreachy-kernel@googlegroups.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).