From: Jonathan Cameron <jic23@kernel.org>
To: Alison Schofield <amsfield22@gmail.com>
Cc: knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net,
kgene@kernel.org, k.kozlowski@samsung.com,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org
Subject: Re: [PATCH 2/9] iio: adc: qcom-spmi-iadc: use regmap to retrieve struct device
Date: Sun, 10 Apr 2016 14:54:45 +0100 [thread overview]
Message-ID: <570A5B25.8060308@kernel.org> (raw)
In-Reply-To: <aaffb79b464a361556e098d42081406813c511c4.1459918214.git.amsfield22@gmail.com>
On 06/04/16 06:16, Alison Schofield wrote:
> Driver includes struct regmap and struct device in its global data.
> Remove the struct device and use regmap API to retrieve device info.
>
> Patch created using Coccinelle plus manual edits.
>
> Signed-off-by: Alison Schofield <amsfield22@gmail.com>
This has the same issue as the exynos driver - in that the regmap belongs
to the parent, not this device.
> ---
> drivers/iio/adc/qcom-spmi-iadc.c | 32 +++++++++++++++++---------------
> 1 file changed, 17 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/iio/adc/qcom-spmi-iadc.c b/drivers/iio/adc/qcom-spmi-iadc.c
> index fabd24e..f69a057 100644
> --- a/drivers/iio/adc/qcom-spmi-iadc.c
> +++ b/drivers/iio/adc/qcom-spmi-iadc.c
> @@ -102,7 +102,6 @@
> /**
> * struct iadc_chip - IADC Current ADC device structure.
> * @regmap: regmap for register read/write.
> - * @dev: This device pointer.
> * @base: base offset for the ADC peripheral.
> * @rsense: Values of the internal and external sense resister in micro Ohms.
> * @poll_eoc: Poll for end of conversion instead of waiting for IRQ.
> @@ -113,7 +112,6 @@
> */
> struct iadc_chip {
> struct regmap *regmap;
> - struct device *dev;
> u16 base;
> bool poll_eoc;
> u32 rsense[2];
> @@ -170,6 +168,7 @@ static int iadc_set_state(struct iadc_chip *iadc, bool state)
>
> static void iadc_status_show(struct iadc_chip *iadc)
> {
> + struct device *dev = regmap_get_device(iadc->regmap);
> u8 mode, sta1, chan, dig, en, req;
> int ret;
>
> @@ -197,7 +196,7 @@ static void iadc_status_show(struct iadc_chip *iadc)
> if (ret < 0)
> return;
>
> - dev_err(iadc->dev,
> + dev_err(dev,
> "mode:%02x en:%02x chan:%02x dig:%02x req:%02x sta1:%02x\n",
> mode, en, chan, dig, req, sta1);
> }
> @@ -284,6 +283,7 @@ static int iadc_read_result(struct iadc_chip *iadc, u16 *data)
>
> static int iadc_do_conversion(struct iadc_chip *iadc, int chan, u16 *data)
> {
> + struct device *dev = regmap_get_device(iadc->regmap);
> unsigned int wait;
> int ret;
>
> @@ -310,7 +310,7 @@ static int iadc_do_conversion(struct iadc_chip *iadc, int chan, u16 *data)
> exit:
> iadc_set_state(iadc, false);
> if (ret < 0)
> - dev_err(iadc->dev, "conversion failed\n");
> + dev_err(dev, "conversion failed\n");
>
> return ret;
> }
> @@ -320,6 +320,7 @@ static int iadc_read_raw(struct iio_dev *indio_dev,
> int *val, int *val2, long mask)
> {
> struct iadc_chip *iadc = iio_priv(indio_dev);
> + struct device *dev = regmap_get_device(iadc->regmap);
> s32 isense_ua, vsense_uv;
> u16 adc_raw, vsense_raw;
> int ret;
> @@ -339,7 +340,7 @@ static int iadc_read_raw(struct iio_dev *indio_dev,
>
> isense_ua = vsense_uv / iadc->rsense[chan->channel];
>
> - dev_dbg(iadc->dev, "off %d gain %d adc %d %duV I %duA\n",
> + dev_dbg(dev, "off %d gain %d adc %d %duV I %duA\n",
> iadc->offset[chan->channel], iadc->gain,
> adc_raw, vsense_uv, isense_ua);
>
> @@ -370,6 +371,7 @@ static irqreturn_t iadc_isr(int irq, void *dev_id)
>
> static int iadc_update_offset(struct iadc_chip *iadc)
> {
> + struct device *dev = regmap_get_device(iadc->regmap);
> int ret;
>
> ret = iadc_do_conversion(iadc, IADC_GAIN_17P857MV, &iadc->gain);
> @@ -382,7 +384,7 @@ static int iadc_update_offset(struct iadc_chip *iadc)
> return ret;
>
> if (iadc->gain == iadc->offset[IADC_INT_RSENSE]) {
> - dev_err(iadc->dev, "error: internal offset == gain %d\n",
> + dev_err(dev, "error: internal offset == gain %d\n",
> iadc->gain);
> return -EINVAL;
> }
> @@ -393,8 +395,7 @@ static int iadc_update_offset(struct iadc_chip *iadc)
> return ret;
>
> if (iadc->gain == iadc->offset[IADC_EXT_RSENSE]) {
> - dev_err(iadc->dev, "error: external offset == gain %d\n",
> - iadc->gain);
> + dev_err(dev, "error: external offset == gain %d\n", iadc->gain);
> return -EINVAL;
> }
>
> @@ -403,6 +404,7 @@ static int iadc_update_offset(struct iadc_chip *iadc)
>
> static int iadc_version_check(struct iadc_chip *iadc)
> {
> + struct device *dev = regmap_get_device(iadc->regmap);
> u8 val;
> int ret;
>
> @@ -411,7 +413,7 @@ static int iadc_version_check(struct iadc_chip *iadc)
> return ret;
>
> if (val < IADC_PERPH_TYPE_ADC) {
> - dev_err(iadc->dev, "%d is not ADC\n", val);
> + dev_err(dev, "%d is not ADC\n", val);
> return -EINVAL;
> }
>
> @@ -420,7 +422,7 @@ static int iadc_version_check(struct iadc_chip *iadc)
> return ret;
>
> if (val < IADC_PERPH_SUBTYPE_IADC) {
> - dev_err(iadc->dev, "%d is not IADC\n", val);
> + dev_err(dev, "%d is not IADC\n", val);
> return -EINVAL;
> }
>
> @@ -429,7 +431,7 @@ static int iadc_version_check(struct iadc_chip *iadc)
> return ret;
>
> if (val < IADC_REVISION2_SUPPORTED_IADC) {
> - dev_err(iadc->dev, "revision %d not supported\n", val);
> + dev_err(dev, "revision %d not supported\n", val);
> return -EINVAL;
> }
>
> @@ -438,6 +440,7 @@ static int iadc_version_check(struct iadc_chip *iadc)
>
> static int iadc_rsense_read(struct iadc_chip *iadc, struct device_node *node)
> {
> + struct device *dev = regmap_get_device(iadc->regmap);
> int ret, sign, int_sense;
> u8 deviation;
>
> @@ -447,7 +450,7 @@ static int iadc_rsense_read(struct iadc_chip *iadc, struct device_node *node)
> iadc->rsense[IADC_EXT_RSENSE] = IADC_INT_RSENSE_IDEAL_VALUE;
>
> if (!iadc->rsense[IADC_EXT_RSENSE]) {
> - dev_err(iadc->dev, "external resistor can't be zero Ohms");
> + dev_err(dev, "external resistor can't be zero Ohms");
> return -EINVAL;
> }
>
> @@ -505,7 +508,6 @@ static int iadc_probe(struct platform_device *pdev)
> return -ENOMEM;
>
> iadc = iio_priv(indio_dev);
> - iadc->dev = dev;
>
> iadc->regmap = dev_get_regmap(dev->parent, NULL);
> if (!iadc->regmap)
> @@ -528,7 +530,7 @@ static int iadc_probe(struct platform_device *pdev)
> if (ret < 0)
> return -ENODEV;
>
> - dev_dbg(iadc->dev, "sense resistors %d and %d micro Ohm\n",
> + dev_dbg(&pdev->dev, "sense resistors %d and %d micro Ohm\n",
> iadc->rsense[IADC_INT_RSENSE],
> iadc->rsense[IADC_EXT_RSENSE]);
>
> @@ -553,7 +555,7 @@ static int iadc_probe(struct platform_device *pdev)
> else
> return ret;
> } else {
> - device_init_wakeup(iadc->dev, 1);
> + device_init_wakeup(&pdev->dev, 1);
> }
>
> ret = iadc_update_offset(iadc);
>
next prev parent reply other threads:[~2016-04-10 13:54 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-06 5:15 [PATCH 0/9] iio: use regmap to retrieve struct device Alison Schofield
2016-04-06 5:15 ` [PATCH 1/9] iio: adc: exynos_adc: " Alison Schofield
2016-04-06 7:03 ` Marek Szyprowski
2016-04-06 20:33 ` Alison Schofield
2016-04-07 5:33 ` Marek Szyprowski
2016-04-10 13:45 ` Jonathan Cameron
2016-04-06 5:16 ` [PATCH 2/9] iio: adc: qcom-spmi-iadc: " Alison Schofield
2016-04-10 13:54 ` Jonathan Cameron [this message]
2016-04-06 5:17 ` [PATCH 3/9] iio: adc: qcom-spmi-vadc: " Alison Schofield
2016-04-10 13:55 ` Jonathan Cameron
2016-04-06 5:18 ` [PATCH 4/9] iio: accel: bmc150: " Alison Schofield
2016-04-06 5:18 ` [PATCH 5/9] iio: accel: mma7455: " Alison Schofield
2016-04-06 7:35 ` Joachim Eastwood
2016-04-10 13:51 ` Jonathan Cameron
2016-04-06 5:19 ` [PATCH 6/9] iio: accel: mxc4005: " Alison Schofield
2016-04-06 5:20 ` [PATCH 7/9] iio: health: afe4403: " Alison Schofield
2016-04-06 5:20 ` [PATCH 8/9] iio: health: afe4404: " Alison Schofield
2016-04-06 5:21 ` [PATCH 9/9] iio: gyro: bmg160_core: " Alison Schofield
2016-04-10 19:03 ` [PATCH v2 0/5] iio: " Alison Schofield
2016-04-10 19:05 ` [PATCH v2 1/5] iio: accel: bmc150: " Alison Schofield
2016-04-16 19:20 ` Jonathan Cameron
2016-04-18 12:18 ` Tirdea, Irina
2016-04-18 14:59 ` Srinivas Pandruvada
2016-04-18 19:16 ` Jonathan Cameron
2016-04-10 19:06 ` [PATCH v2 2/5] iio: accel: mxc4005: " Alison Schofield
2016-04-16 19:21 ` Jonathan Cameron
2016-04-10 19:07 ` [PATCH v2 3/5] iio: health: afe4403: " Alison Schofield
2016-04-16 19:22 ` Jonathan Cameron
2016-04-10 19:07 ` [PATCH v2 4/5] iio: health: afe4404: " Alison Schofield
2016-04-16 19:22 ` Jonathan Cameron
2016-04-17 18:07 ` Andrew F. Davis
2016-04-18 4:56 ` Alison Schofield
2016-04-18 15:53 ` Andrew F. Davis
2016-04-18 19:25 ` Jonathan Cameron
2016-04-10 19:08 ` [PATCH v2 5/5] iio: gyro: bmg160: " Alison Schofield
2016-04-16 19:24 ` Jonathan Cameron
2016-04-17 4:33 ` Alison Schofield
2016-04-18 15:03 ` Srinivas Pandruvada
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=570A5B25.8060308@kernel.org \
--to=jic23@kernel.org \
--cc=amsfield22@gmail.com \
--cc=k.kozlowski@samsung.com \
--cc=kgene@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).