Re: [PATCH v8 1/4] arm64: zynqmp: DT: Add Xilinx AMS node

[Michal Simek <michal.simek@xilinx.com>]

On 11/8/21 22:05, Anand Ashok Dumbre wrote:
> The Xilinx AMS includes an ADC as well as on-chip sensors that can be
> used to sample external and monitor on-die operating conditions, such as
> temperature and supply voltage levels.
> 
> Co-developed-by: Manish Narani <manish.narani@xilinx.com>
> Signed-off-by: Manish Narani <manish.narani@xilinx.com>
> Signed-off-by: Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com>
> ---
>   arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 26 +++++++++++++++++++++++++-
>   1 file changed, 25 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> index 28dccb891a53..b12e0cd0adfd 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> @@ -1,4 +1,4 @@
> -// SPDX-License-Identifier: GPL-2.0+
> +// SPDX-License-Identifier: GPL-2.0
>   /*
>    * dts file for Xilinx ZynqMP
>    *
> @@ -849,6 +849,30 @@
>   			timeout-sec = <10>;
>   		};
>   
> +		xilinx_ams: ams@ffa50000 {
> +			compatible = "xlnx,zynqmp-ams";
> +			status = "disabled";
> +			interrupt-parent = <&gic>;
> +			interrupts = <0 56 4>;
> +			reg = <0x0 0xffa50000 0x0 0x800>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			#io-channel-cells = <1>;
> +			ranges = <0 0 0xffa50800 0x800>;
> +
> +			ams_ps: ams-ps@0 {
> +				compatible = "xlnx,zynqmp-ams-ps";
> +				status = "disabled";
> +				reg = <0 0x400>;
> +			};
> +
> +			ams_pl: ams-pl@400 {
> +				compatible = "xlnx,zynqmp-ams-pl";
> +				status = "disabled";
> +				reg = <0x400 0x400>;
> +			};
> +		};
> +
>   		zynqmp_dpdma: dma-controller@fd4c0000 {
>   			compatible = "xlnx,zynqmp-dpdma";
>   			status = "disabled";
> 

Please drop this patch from this series. When driver is applied this 
patch will go via my xilinx soc tree.

FYI: And dt binding patch should be the first.

Thanks,
Michal