Re: [PATCH 2/4] arm64: dts: qcom: qcm6490-fairphone-fp5: Add PM7250B thermals

[Konrad Dybcio <konrad.dybcio@linaro.org>]

On 10/13/23 10:09, Luca Weiss wrote:
> Configure the thermals for the CHARGER_SKIN_THERM and USB_CONN_THERM
> thermistors connected to PM7250B.
> 
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> ---
>   arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 66 ++++++++++++++++++++++
>   1 file changed, 66 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
> index 2de0b8c26c35..7fe19b556e6a 100644
> --- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
> +++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
> @@ -134,6 +134,36 @@ afvdd_2p8: regulator-afvdd-2p8 {
>   		enable-active-high;
>   		vin-supply = <&vreg_bob>;
>   	};
> +
> +	thermal-zones {
> +		chg-skin-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&pm7250b_adc_tm 0>;
> +
> +			trips {
> +				active-config0 {
> +					temperature = <125000>;
I guess looking at skin-temp-thermal in x13s dts for starters
is a good idea.. we should probably then adjust it to something
more pocketable..

Konrad