From: Marcelo Schmitt <marcelo.schmitt@analog.com>
To: <apw@canonical.com>, <joe@perches.com>, <dwaipayanray1@gmail.com>,
<lukas.bulwahn@gmail.com>, <paul.cercueil@analog.com>,
<Michael.Hennerich@analog.com>, <lars@metafoo.de>,
<jic23@kernel.org>, <robh+dt@kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>,
<dan.carpenter@linaro.org>, <dlechner@baylibre.com>,
<marcelo.schmitt1@gmail.com>
Cc: <linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v5 03/11] iio: adc: ad7091r: Move generic AD7091R code to base driver and header file
Date: Tue, 19 Dec 2023 17:27:04 -0300 [thread overview]
Message-ID: <6376fc523ee503d47ec499e2cd2ef13bfb5fd8ba.1703013352.git.marcelo.schmitt1@gmail.com> (raw)
In-Reply-To: <cover.1703013352.git.marcelo.schmitt1@gmail.com>
Some code generic to AD7091R devices such as channel definitions were in
the AD7091R-5 driver. There was also some generic register definitions
declared in the base driver which would make more sense to be in the
header file.
The device state struct will be needed for the ad7091r8 driver in a
follow up patch so that ought to be moved to the header file as well.
Lastly, a couple of regmap callback functions are also capable of
abstracting characteristics of different AD7091R devices and those are
now being exported to IIO_AD7091R name space.
Move AD7091R generic code either to the base driver or to the header
file so both the ad7091r5 and the ad7091r8 driver can use those
declaration in follow up patches.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
---
drivers/iio/adc/ad7091r-base.c | 29 ++++---------------------
drivers/iio/adc/ad7091r-base.h | 39 +++++++++++++++++++++++++++++++++-
drivers/iio/adc/ad7091r5.c | 11 ----------
3 files changed, 42 insertions(+), 37 deletions(-)
diff --git a/drivers/iio/adc/ad7091r-base.c b/drivers/iio/adc/ad7091r-base.c
index 7ccc9b44dcd8..3f05e94c756f 100644
--- a/drivers/iio/adc/ad7091r-base.c
+++ b/drivers/iio/adc/ad7091r-base.c
@@ -16,14 +16,6 @@
#include "ad7091r-base.h"
-#define AD7091R_REG_RESULT 0
-#define AD7091R_REG_CHANNEL 1
-#define AD7091R_REG_CONF 2
-#define AD7091R_REG_ALERT 3
-#define AD7091R_REG_CH_LOW_LIMIT(ch) ((ch) * 3 + 4)
-#define AD7091R_REG_CH_HIGH_LIMIT(ch) ((ch) * 3 + 5)
-#define AD7091R_REG_CH_HYSTERESIS(ch) ((ch) * 3 + 6)
-
/* AD7091R_REG_RESULT */
#define AD7091R_REG_RESULT_CH_ID(x) (((x) >> 13) & 0x3)
#define AD7091R_REG_RESULT_CONV_RESULT(x) ((x) & 0xfff)
@@ -36,21 +28,6 @@
#define AD7091R_REG_CONF_MODE_MASK \
(AD7091R_REG_CONF_AUTO | AD7091R_REG_CONF_CMD)
-enum ad7091r_mode {
- AD7091R_MODE_SAMPLE,
- AD7091R_MODE_COMMAND,
- AD7091R_MODE_AUTOCYCLE,
-};
-
-struct ad7091r_state {
- struct device *dev;
- struct regmap *map;
- struct regulator *vref;
- const struct ad7091r_chip_info *chip_info;
- enum ad7091r_mode mode;
- struct mutex lock; /*lock to prevent concurent reads */
-};
-
const struct iio_event_spec ad7091r_events[] = {
{
.type = IIO_EV_TYPE_THRESH,
@@ -432,7 +409,7 @@ int ad7091r_probe(struct device *dev, const char *name,
}
EXPORT_SYMBOL_NS_GPL(ad7091r_probe, IIO_AD7091R);
-static bool ad7091r_writeable_reg(struct device *dev, unsigned int reg)
+bool ad7091r_writeable_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case AD7091R_REG_RESULT:
@@ -442,8 +419,9 @@ static bool ad7091r_writeable_reg(struct device *dev, unsigned int reg)
return true;
}
}
+EXPORT_SYMBOL_NS_GPL(ad7091r_writeable_reg, IIO_AD7091R);
-static bool ad7091r_volatile_reg(struct device *dev, unsigned int reg)
+bool ad7091r_volatile_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case AD7091R_REG_RESULT:
@@ -453,6 +431,7 @@ static bool ad7091r_volatile_reg(struct device *dev, unsigned int reg)
return false;
}
}
+EXPORT_SYMBOL_NS_GPL(ad7091r_volatile_reg, IIO_AD7091R);
const struct regmap_config ad7091r_regmap_config = {
.reg_bits = 8,
diff --git a/drivers/iio/adc/ad7091r-base.h b/drivers/iio/adc/ad7091r-base.h
index b9e1c8bf3440..b63c658a9d23 100644
--- a/drivers/iio/adc/ad7091r-base.h
+++ b/drivers/iio/adc/ad7091r-base.h
@@ -8,14 +8,48 @@
#ifndef __DRIVERS_IIO_ADC_AD7091R_BASE_H__
#define __DRIVERS_IIO_ADC_AD7091R_BASE_H__
+#define AD7091R_REG_RESULT 0
+#define AD7091R_REG_CHANNEL 1
+#define AD7091R_REG_CONF 2
+#define AD7091R_REG_ALERT 3
+#define AD7091R_REG_CH_LOW_LIMIT(ch) ((ch) * 3 + 4)
+#define AD7091R_REG_CH_HIGH_LIMIT(ch) ((ch) * 3 + 5)
+#define AD7091R_REG_CH_HYSTERESIS(ch) ((ch) * 3 + 6)
+
#define AD7091R_REG_CONF_INT_VREF BIT(0)
/* AD7091R_REG_CH_LIMIT */
#define AD7091R_HIGH_LIMIT 0xFFF
#define AD7091R_LOW_LIMIT 0x0
+#define AD7091R_CHANNEL(idx, bits, ev, num_ev) { \
+ .type = IIO_VOLTAGE, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+ .indexed = 1, \
+ .channel = idx, \
+ .event_spec = ev, \
+ .num_event_specs = num_ev, \
+ .scan_type.storagebits = 16, \
+ .scan_type.realbits = bits, \
+}
+
struct device;
-struct ad7091r_state;
+
+enum ad7091r_mode {
+ AD7091R_MODE_SAMPLE,
+ AD7091R_MODE_COMMAND,
+ AD7091R_MODE_AUTOCYCLE,
+};
+
+struct ad7091r_state {
+ struct device *dev;
+ struct regmap *map;
+ struct regulator *vref;
+ const struct ad7091r_chip_info *chip_info;
+ enum ad7091r_mode mode;
+ struct mutex lock; /*lock to prevent concurent reads */
+};
struct ad7091r_chip_info {
unsigned int num_channels;
@@ -31,4 +65,7 @@ int ad7091r_probe(struct device *dev, const char *name,
const struct ad7091r_chip_info *chip_info,
struct regmap *map, int irq);
+bool ad7091r_volatile_reg(struct device *dev, unsigned int reg);
+bool ad7091r_writeable_reg(struct device *dev, unsigned int reg);
+
#endif /* __DRIVERS_IIO_ADC_AD7091R_BASE_H__ */
diff --git a/drivers/iio/adc/ad7091r5.c b/drivers/iio/adc/ad7091r5.c
index dae98c95ebb8..9d3ccfca94ec 100644
--- a/drivers/iio/adc/ad7091r5.c
+++ b/drivers/iio/adc/ad7091r5.c
@@ -12,17 +12,6 @@
#include "ad7091r-base.h"
-#define AD7091R_CHANNEL(idx, bits, ev, num_ev) { \
- .type = IIO_VOLTAGE, \
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
- .indexed = 1, \
- .channel = idx, \
- .event_spec = ev, \
- .num_event_specs = num_ev, \
- .scan_type.storagebits = 16, \
- .scan_type.realbits = bits, \
-}
static const struct iio_chan_spec ad7091r5_channels_irq[] = {
AD7091R_CHANNEL(0, 12, ad7091r_events, ARRAY_SIZE(ad7091r_events)),
AD7091R_CHANNEL(1, 12, ad7091r_events, ARRAY_SIZE(ad7091r_events)),
--
2.42.0
next prev parent reply other threads:[~2023-12-19 20:27 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-19 20:25 [PATCH v5 00/11] Add support for AD7091R-2/-4/-8 Marcelo Schmitt
2023-12-19 20:26 ` [PATCH v5 01/11] iio: adc: ad7091r: Allow users to configure device events Marcelo Schmitt
2023-12-19 20:26 ` [PATCH v5 02/11] iio: adc: ad7091r: Enable internal vref if external vref is not supplied Marcelo Schmitt
2023-12-19 20:27 ` Marcelo Schmitt [this message]
2023-12-19 20:27 ` [PATCH v5 04/11] iio: adc: ad7091r: Move chip init data to container struct Marcelo Schmitt
2023-12-19 20:28 ` [PATCH v5 05/11] iio: adc: ad7091r: Remove unneeded probe parameters Marcelo Schmitt
2023-12-19 20:28 ` [PATCH v5 06/11] iio: adc: ad7091r: Set device mode through chip_info callback Marcelo Schmitt
2023-12-19 20:29 ` [PATCH v5 07/11] iio: adc: ad7091r: Add chip_info callback to get conversion result channel Marcelo Schmitt
2023-12-19 20:29 ` [PATCH v5 08/11] iio: adc: Split AD7091R-5 config symbol Marcelo Schmitt
2023-12-19 20:32 ` [PATCH v5 09/11] dt-bindings: iio: Add AD7091R-8 Marcelo Schmitt
2023-12-19 20:32 ` [PATCH v5 10/11] iio: adc: Add support for AD7091R-8 Marcelo Schmitt
2023-12-19 20:32 ` [PATCH v5 11/11] MAINTAINERS: Add MAINTAINERS entry for AD7091R Marcelo Schmitt
2023-12-21 16:59 ` Jonathan Cameron
2023-12-22 12:49 ` Marcelo Schmitt
2023-12-26 15:45 ` Jonathan Cameron
2023-12-21 16:53 ` [PATCH v5 00/11] Add support for AD7091R-2/-4/-8 Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6376fc523ee503d47ec499e2cd2ef13bfb5fd8ba.1703013352.git.marcelo.schmitt1@gmail.com \
--to=marcelo.schmitt@analog.com \
--cc=Michael.Hennerich@analog.com \
--cc=apw@canonical.com \
--cc=conor+dt@kernel.org \
--cc=dan.carpenter@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=dwaipayanray1@gmail.com \
--cc=jic23@kernel.org \
--cc=joe@perches.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lukas.bulwahn@gmail.com \
--cc=marcelo.schmitt1@gmail.com \
--cc=paul.cercueil@analog.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox