From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [PATCH] dt-bindings: iio: adc: stm32-dfsdm: fix types, add missing pinctrl To: Fabrice Gasnier , , CC: , , , , , , , , , , , References: <1519384260-23875-1-git-send-email-fabrice.gasnier@st.com> From: Arnaud Pouliquen Message-ID: <7e40cdfc-8d9f-ccfb-f3fd-8d639a87d5b0@st.com> Date: Fri, 23 Feb 2018 14:47:36 +0100 MIME-Version: 1.0 In-Reply-To: <1519384260-23875-1-git-send-email-fabrice.gasnier@st.com> Content-Type: text/plain; charset="utf-8" List-ID: Hello, Acked-by: Arnaud Pouliquen Regards, Arnaud On 02/23/2018 12:11 PM, Fabrice Gasnier wrote: > - Add missing pinctrl description. Support is made optional as dfsdm > may use internal sources (e.g. via registers) > - Fix typo in IIO STM32 DFSDM filter "MANCH_F" description. > Basically, this should be "falling edge = logic 0", not "1" that applies > to "MANCH_R". > BTW, make the description complete by describing both rising/falling > edges as described in reference manuals. > > Fixes: 6c82f947fc97 ("IIO: add DT bindings for stm32 DFSDM filter") > > Signed-off-by: Fabrice Gasnier > --- > Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt | 8 ++++++-- > 1 file changed, 6 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt > index 911492da..ed7520d 100644 > --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt > +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt > @@ -32,6 +32,10 @@ Optional properties: > to "clock" property. Frequency must be a multiple of the rcc > clock frequency. If not, SPI CLKOUT frequency will not be > accurate. > +- pinctrl-names: Set to "default". > +- pinctrl-0: List of phandles pointing to pin configuration > + nodes to set pins in mode of operation for dfsdm > + on external pin. > > Contents of a STM32 DFSDM child nodes: > -------------------------------------- > @@ -68,8 +72,8 @@ Optional properties: > - st,adc-channel-types: Single-ended channel input type. > - "SPI_R": SPI with data on rising edge (default) > - "SPI_F": SPI with data on falling edge > - - "MANCH_R": manchester codec, rising edge = logic 0 > - - "MANCH_F": manchester codec, falling edge = logic 1 > + - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1 > + - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0 > - st,adc-channel-clk-src: Conversion clock source. > - "CLKIN": external SPI clock (CLKIN x) > - "CLKOUT": internal SPI clock (CLKOUT) (default) >