[PATCH v4 00/11] Support ROHM BD79105 ADC

[PATCH v4 00/11] Support ROHM BD79105 ADC

[Matti Vaittinen]

[-- Attachment #1: Type: text/plain, Size: 2086 bytes --]

Add support for the ROHM BD79105 ADC
(and do some minor simplifications to the ad7476 driver while at it).

The first 2 patches were originally sent as an RFC:
https://lore.kernel.org/all/cover.1754041258.git.mazziesaccount@gmail.com/

Revision history:
  v3 => v4:
   - Add patch:
     8/11 "dt-bindings: iio: adc: ad7476: Drop redundant prop: true"
   - Drop redundant true -branches also from the bd79105 binding
   - Other patches unchanged.

  v2 => v3:
   - Drop 5/10 "Limit the scope of the chip_info"
   - Add 5/10 "use *_cansleep GPIO APIs"
   - Multiple fixes as suggested during v2 review. More accurate
     changelog included in individual patches

  v1 => v2:
   - Two new patches:
     5/10 "Limit the scope of the chip_info" and
     6/10 "Drop convstart chan_spec"
     Please, let me know if you think some of the changes should be
     squashed.
   - Multiple fixes as suggested during v1 review. More accurate
     changelog included in individual patches

  Simplification RFC => ROHM BD79105 support series v1:
   - Use spi_get_device_match_data()
   - Fix uV to mV conversion
   - Rewording of commit message
   - Added patches 3 to 8.

Matti Vaittinen (11):
  iio: adc: ad7476: Simplify chip type detection
  iio: adc: ad7476: Simplify scale handling
  iio: adc: ad7476: Use mV for internal reference
  iio: adc: ad7476: Use correct channel for bit info
  iio: adc: ad7476: use *_cansleep GPIO APIs
  iio: adc: ad7476: Drop convstart chan_spec
  iio: adc: ad7476: Conditionally call convstart
  dt-bindings: iio: adc: ad7476: Drop redundant prop: true
  dt-bindings: iio: adc: ad7476: Add ROHM bd79105
  iio: adc: ad7476: Support ROHM BD79105
  MAINTAINERS: A driver for simple 1-channel SPI ADCs

 .../bindings/iio/adc/adi,ad7476.yaml          | 100 +++-
 MAINTAINERS                                   |   5 +
 drivers/iio/adc/ad7476.c                      | 461 +++++++++---------
 3 files changed, 311 insertions(+), 255 deletions(-)


base-commit: 93ef68672bb353838cdf8314be8765c05768916b
-- 
2.50.1


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[PATCH v4 01/11] iio: adc: ad7476: Simplify chip type detection

[Matti Vaittinen]

[-- Attachment #1: Type: text/plain, Size: 11440 bytes --]

The ad7476 driver uses a table of structures for defining the IC variant
specific data. Table is indexed using enum values, which are picked by
SPI ID.

Having the table and an enum adds extra complexity and may encourage
adding IC specific quircks in the code, instead of centralizing the IC
differences in one place, the chip-info.

Simplify this by dropping the table and using individual structures for
the IC specific data, and storing the IC specific structure's address
directly in the SPI ID data. Finally, switch to the
spi_get_device_match_data() and add a check for the return value.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>

---
Revision history:
 v1 =>
 - No changes

 This patch was originally sent as an RFC in 2 patch series:
 https://lore.kernel.org/all/cover.1754041258.git.mazziesaccount@gmail.com/
 Changes from the RFC => v1:
 - Use spi_get_device_match_data()
 - Slightly reword commit message
---
 drivers/iio/adc/ad7476.c | 296 +++++++++++++++++++--------------------
 1 file changed, 146 insertions(+), 150 deletions(-)

diff --git a/drivers/iio/adc/ad7476.c b/drivers/iio/adc/ad7476.c
index aea734aa06bd..9869526c1524 100644
--- a/drivers/iio/adc/ad7476.c
+++ b/drivers/iio/adc/ad7476.c
@@ -52,29 +52,6 @@ struct ad7476_state {
 	unsigned char data[ALIGN(2, sizeof(s64)) + sizeof(s64)] __aligned(IIO_DMA_MINALIGN);
 };
 
-enum ad7476_supported_device_ids {
-	ID_AD7091,
-	ID_AD7091R,
-	ID_AD7273,
-	ID_AD7274,
-	ID_AD7276,
-	ID_AD7277,
-	ID_AD7278,
-	ID_AD7466,
-	ID_AD7467,
-	ID_AD7468,
-	ID_AD7475,
-	ID_AD7495,
-	ID_AD7940,
-	ID_ADC081S,
-	ID_ADC101S,
-	ID_ADC121S,
-	ID_ADS7866,
-	ID_ADS7867,
-	ID_ADS7868,
-	ID_LTC2314_14,
-};
-
 static void ad7091_convst(struct ad7476_state *st)
 {
 	if (!st->convst_gpio)
@@ -190,102 +167,119 @@ static int ad7476_read_raw(struct iio_dev *indio_dev,
 #define ADS786X_CHAN(bits) _AD7476_CHAN((bits), 12 - (bits), \
 		BIT(IIO_CHAN_INFO_RAW))
 
-static const struct ad7476_chip_info ad7476_chip_info_tbl[] = {
-	[ID_AD7091] = {
-		.channel[0] = AD7091R_CHAN(12),
-		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
-		.convst_channel[0] = AD7091R_CONVST_CHAN(12),
-		.convst_channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
-		.reset = ad7091_reset,
-	},
-	[ID_AD7091R] = {
-		.channel[0] = AD7091R_CHAN(12),
-		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
-		.convst_channel[0] = AD7091R_CONVST_CHAN(12),
-		.convst_channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
-		.int_vref_uv = 2500000,
-		.has_vref = true,
-		.reset = ad7091_reset,
-	},
-	[ID_AD7273] = {
-		.channel[0] = AD7940_CHAN(10),
-		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
-		.has_vref = true,
-	},
-	[ID_AD7274] = {
-		.channel[0] = AD7940_CHAN(12),
-		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
-		.has_vref = true,
-	},
-	[ID_AD7276] = {
-		.channel[0] = AD7940_CHAN(12),
-		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
-	},
-	[ID_AD7277] = {
-		.channel[0] = AD7940_CHAN(10),
-		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
-	},
-	[ID_AD7278] = {
-		.channel[0] = AD7940_CHAN(8),
-		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
-	},
-	[ID_AD7466] = {
-		.channel[0] = AD7476_CHAN(12),
-		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
-	},
-	[ID_AD7467] = {
-		.channel[0] = AD7476_CHAN(10),
-		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
-	},
-	[ID_AD7468] = {
-		.channel[0] = AD7476_CHAN(8),
-		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
-	},
-	[ID_AD7475] = {
-		.channel[0] = AD7476_CHAN(12),
-		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
-		.has_vref = true,
-		.has_vdrive = true,
-	},
-	[ID_AD7495] = {
-		.channel[0] = AD7476_CHAN(12),
-		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
-		.int_vref_uv = 2500000,
-		.has_vdrive = true,
-	},
-	[ID_AD7940] = {
-		.channel[0] = AD7940_CHAN(14),
-		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
-	},
-	[ID_ADC081S] = {
-		.channel[0] = ADC081S_CHAN(8),
-		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
-	},
-	[ID_ADC101S] = {
-		.channel[0] = ADC081S_CHAN(10),
-		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
-	},
-	[ID_ADC121S] = {
-		.channel[0] = ADC081S_CHAN(12),
-		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
-	},
-	[ID_ADS7866] = {
-		.channel[0] = ADS786X_CHAN(12),
-		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
-	},
-	[ID_ADS7867] = {
-		.channel[0] = ADS786X_CHAN(10),
-		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
-	},
-	[ID_ADS7868] = {
-		.channel[0] = ADS786X_CHAN(8),
-		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
-	},
-	[ID_LTC2314_14] = {
-		.channel[0] = AD7940_CHAN(14),
-		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
-		.has_vref = true,
-	},
+static const struct ad7476_chip_info ad7091_chip_info = {
+	.channel[0] = AD7091R_CHAN(12),
+	.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+	.convst_channel[0] = AD7091R_CONVST_CHAN(12),
+	.convst_channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+	.reset = ad7091_reset,
+};
+
+static const struct ad7476_chip_info ad7091r_chip_info = {
+	.channel[0] = AD7091R_CHAN(12),
+	.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+	.convst_channel[0] = AD7091R_CONVST_CHAN(12),
+	.convst_channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+	.int_vref_uv = 2500000,
+	.has_vref = true,
+	.reset = ad7091_reset,
+};
+
+static const struct ad7476_chip_info ad7273_chip_info = {
+	.channel[0] = AD7940_CHAN(10),
+	.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+	.has_vref = true,
+};
+
+static const struct ad7476_chip_info ad7274_chip_info = {
+	.channel[0] = AD7940_CHAN(12),
+	.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+	.has_vref = true,
+};
+
+static const struct ad7476_chip_info ad7276_chip_info = {
+	.channel[0] = AD7940_CHAN(12),
+	.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+static const struct ad7476_chip_info ad7277_chip_info = {
+	.channel[0] = AD7940_CHAN(10),
+	.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+static const struct ad7476_chip_info ad7278_chip_info = {
+	.channel[0] = AD7940_CHAN(8),
+	.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+static const struct ad7476_chip_info ad7466_chip_info = {
+	.channel[0] = AD7476_CHAN(12),
+	.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+static const struct ad7476_chip_info ad7467_chip_info = {
+	.channel[0] = AD7476_CHAN(10),
+	.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+static const struct ad7476_chip_info ad7468_chip_info = {
+	.channel[0] = AD7476_CHAN(8),
+	.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+static const struct ad7476_chip_info ad7475_chip_info = {
+	.channel[0] = AD7476_CHAN(12),
+	.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+	.has_vref = true,
+	.has_vdrive = true,
+};
+
+static const struct ad7476_chip_info ad7495_chip_info = {
+	.channel[0] = AD7476_CHAN(12),
+	.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+	.int_vref_uv = 2500000,
+	.has_vdrive = true,
+};
+
+static const struct ad7476_chip_info ad7940_chip_info = {
+	.channel[0] = AD7940_CHAN(14),
+	.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+static const struct ad7476_chip_info adc081s_chip_info = {
+	.channel[0] = ADC081S_CHAN(8),
+	.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+static const struct ad7476_chip_info adc101s_chip_info = {
+	.channel[0] = ADC081S_CHAN(10),
+	.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+static const struct ad7476_chip_info adc121s_chip_info = {
+	.channel[0] = ADC081S_CHAN(12),
+	.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+static const struct ad7476_chip_info ads7866_chip_info = {
+	.channel[0] = ADS786X_CHAN(12),
+	.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+static const struct ad7476_chip_info ads7867_chip_info = {
+	.channel[0] = ADS786X_CHAN(10),
+	.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+static const struct ad7476_chip_info ads7868_chip_info = {
+	.channel[0] = ADS786X_CHAN(8),
+	.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+static const struct ad7476_chip_info ltc2314_14_chip_info = {
+	.channel[0] = AD7940_CHAN(14),
+	.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+	.has_vref = true,
 };
 
 static const struct iio_info ad7476_info = {
@@ -311,8 +305,10 @@ static int ad7476_probe(struct spi_device *spi)
 		return -ENOMEM;
 
 	st = iio_priv(indio_dev);
-	st->chip_info =
-		&ad7476_chip_info_tbl[spi_get_device_id(spi)->driver_data];
+
+	st->chip_info = spi_get_device_match_data(spi);
+	if (!st->chip_info)
+		return -ENODEV;
 
 	reg = devm_regulator_get(&spi->dev, "vcc");
 	if (IS_ERR(reg))
@@ -408,41 +404,41 @@ static int ad7476_probe(struct spi_device *spi)
 }
 
 static const struct spi_device_id ad7476_id[] = {
-	{ "ad7091", ID_AD7091 },
-	{ "ad7091r", ID_AD7091R },
-	{ "ad7273", ID_AD7273 },
-	{ "ad7274", ID_AD7274 },
-	{ "ad7276", ID_AD7276},
-	{ "ad7277", ID_AD7277 },
-	{ "ad7278", ID_AD7278 },
-	{ "ad7466", ID_AD7466 },
-	{ "ad7467", ID_AD7467 },
-	{ "ad7468", ID_AD7468 },
-	{ "ad7475", ID_AD7475 },
-	{ "ad7476", ID_AD7466 },
-	{ "ad7476a", ID_AD7466 },
-	{ "ad7477", ID_AD7467 },
-	{ "ad7477a", ID_AD7467 },
-	{ "ad7478", ID_AD7468 },
-	{ "ad7478a", ID_AD7468 },
-	{ "ad7495", ID_AD7495 },
-	{ "ad7910", ID_AD7467 },
-	{ "ad7920", ID_AD7466 },
-	{ "ad7940", ID_AD7940 },
-	{ "adc081s", ID_ADC081S },
-	{ "adc101s", ID_ADC101S },
-	{ "adc121s", ID_ADC121S },
-	{ "ads7866", ID_ADS7866 },
-	{ "ads7867", ID_ADS7867 },
-	{ "ads7868", ID_ADS7868 },
+	{ "ad7091", (kernel_ulong_t)&ad7091_chip_info },
+	{ "ad7091r", (kernel_ulong_t)&ad7091r_chip_info },
+	{ "ad7273", (kernel_ulong_t)&ad7273_chip_info },
+	{ "ad7274", (kernel_ulong_t)&ad7274_chip_info },
+	{ "ad7276", (kernel_ulong_t)&ad7276_chip_info },
+	{ "ad7277", (kernel_ulong_t)&ad7277_chip_info },
+	{ "ad7278", (kernel_ulong_t)&ad7278_chip_info },
+	{ "ad7466", (kernel_ulong_t)&ad7466_chip_info },
+	{ "ad7467", (kernel_ulong_t)&ad7467_chip_info },
+	{ "ad7468", (kernel_ulong_t)&ad7468_chip_info },
+	{ "ad7475", (kernel_ulong_t)&ad7475_chip_info },
+	{ "ad7476", (kernel_ulong_t)&ad7466_chip_info },
+	{ "ad7476a", (kernel_ulong_t)&ad7466_chip_info },
+	{ "ad7477", (kernel_ulong_t)&ad7467_chip_info },
+	{ "ad7477a", (kernel_ulong_t)&ad7467_chip_info },
+	{ "ad7478", (kernel_ulong_t)&ad7468_chip_info },
+	{ "ad7478a", (kernel_ulong_t)&ad7468_chip_info },
+	{ "ad7495", (kernel_ulong_t)&ad7495_chip_info },
+	{ "ad7910", (kernel_ulong_t)&ad7467_chip_info },
+	{ "ad7920", (kernel_ulong_t)&ad7466_chip_info },
+	{ "ad7940", (kernel_ulong_t)&ad7940_chip_info },
+	{ "adc081s", (kernel_ulong_t)&adc081s_chip_info },
+	{ "adc101s", (kernel_ulong_t)&adc101s_chip_info },
+	{ "adc121s", (kernel_ulong_t)&adc121s_chip_info },
+	{ "ads7866", (kernel_ulong_t)&ads7866_chip_info },
+	{ "ads7867", (kernel_ulong_t)&ads7867_chip_info },
+	{ "ads7868", (kernel_ulong_t)&ads7868_chip_info },
 	/*
 	 * The ROHM BU79100G is identical to the TI's ADS7866 from the software
 	 * point of view. The binding document mandates the ADS7866 to be
 	 * marked as a fallback for the BU79100G, but we still need the SPI ID
 	 * here to make the module loading work.
 	 */
-	{ "bu79100g", ID_ADS7866 },
-	{ "ltc2314-14", ID_LTC2314_14 },
+	{ "bu79100g", (kernel_ulong_t)&ads7866_chip_info },
+	{ "ltc2314-14", (kernel_ulong_t)&ltc2314_14_chip_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(spi, ad7476_id);
-- 
2.50.1


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[PATCH v4 02/11] iio: adc: ad7476: Simplify scale handling

[Matti Vaittinen]

[-- Attachment #1: Type: text/plain, Size: 5521 bytes --]

The ad7476 driver supports variants with different amount of supply
regulators. On some variants there is only VCC, which is used as a
reference voltage. Others have separate VREF regulator, and some rely on
internal VREF. Some have both internal VREF and option to connect
external one.

The ad7476 driver reads the regulator voltage only when the user asks to
get the scale. This means the driver needs to do some dancing while
picking the correct reference regulator (or internal reference), and
store it for the later use.

According to the discussion [1] variable voltage references are rare,
making it hard to justify the added complexity for supporting those.

Drop the support for the variable voltage references and simplify things
by using the managed regulator get and enable interfaces.

Link: https://lore.kernel.org/linux-iio/20250331122247.05c6b09d@jic23-huawei/ #1
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>

---
Revision history:
 v2 => :
 - No changes

 v1 => v2:
 - use link-tag

 This patch was originally sent as an RFC in 2 patch series:
 https://lore.kernel.org/all/cover.1754041258.git.mazziesaccount@gmail.com/
 Changes from the RFC:
 - Fix the faulty conversion from  uV to mV as pointed out by David.
---
 drivers/iio/adc/ad7476.c | 84 ++++++++++------------------------------
 1 file changed, 21 insertions(+), 63 deletions(-)

diff --git a/drivers/iio/adc/ad7476.c b/drivers/iio/adc/ad7476.c
index 9869526c1524..f117aafd8fad 100644
--- a/drivers/iio/adc/ad7476.c
+++ b/drivers/iio/adc/ad7476.c
@@ -39,10 +39,10 @@ struct ad7476_chip_info {
 struct ad7476_state {
 	struct spi_device		*spi;
 	const struct ad7476_chip_info	*chip_info;
-	struct regulator		*ref_reg;
 	struct gpio_desc		*convst_gpio;
 	struct spi_transfer		xfer;
 	struct spi_message		msg;
+	int				scale_mv;
 	/*
 	 * DMA (thus cache coherency maintenance) may require the
 	 * transfer buffers to live in their own cache lines.
@@ -111,7 +111,6 @@ static int ad7476_read_raw(struct iio_dev *indio_dev,
 {
 	int ret;
 	struct ad7476_state *st = iio_priv(indio_dev);
-	int scale_uv;
 
 	switch (m) {
 	case IIO_CHAN_INFO_RAW:
@@ -126,14 +125,7 @@ static int ad7476_read_raw(struct iio_dev *indio_dev,
 			GENMASK(st->chip_info->channel[0].scan_type.realbits - 1, 0);
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
-		if (st->ref_reg) {
-			scale_uv = regulator_get_voltage(st->ref_reg);
-			if (scale_uv < 0)
-				return scale_uv;
-		} else {
-			scale_uv = st->chip_info->int_vref_uv;
-		}
-		*val = scale_uv / 1000;
+		*val = st->scale_mv;
 		*val2 = chan->scan_type.realbits;
 		return IIO_VAL_FRACTIONAL_LOG2;
 	}
@@ -286,18 +278,10 @@ static const struct iio_info ad7476_info = {
 	.read_raw = &ad7476_read_raw,
 };
 
-static void ad7476_reg_disable(void *data)
-{
-	struct regulator *reg = data;
-
-	regulator_disable(reg);
-}
-
 static int ad7476_probe(struct spi_device *spi)
 {
 	struct ad7476_state *st;
 	struct iio_dev *indio_dev;
-	struct regulator *reg;
 	int ret;
 
 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
@@ -310,58 +294,32 @@ static int ad7476_probe(struct spi_device *spi)
 	if (!st->chip_info)
 		return -ENODEV;
 
-	reg = devm_regulator_get(&spi->dev, "vcc");
-	if (IS_ERR(reg))
-		return PTR_ERR(reg);
-
-	ret = regulator_enable(reg);
-	if (ret)
-		return ret;
-
-	ret = devm_add_action_or_reset(&spi->dev, ad7476_reg_disable, reg);
-	if (ret)
-		return ret;
-
-	/* Either vcc or vref (below) as appropriate */
-	if (!st->chip_info->int_vref_uv)
-		st->ref_reg = reg;
+	/* Use VCC for reference voltage if vref / internal vref aren't used */
+	if (!st->chip_info->int_vref_uv && !st->chip_info->has_vref) {
+		ret = devm_regulator_get_enable_read_voltage(&spi->dev, "vcc");
+		if (ret < 0)
+			return ret;
+		st->scale_mv = ret / 1000;
+	} else {
+		ret = devm_regulator_get_enable(&spi->dev, "vcc");
+		if (ret < 0)
+			return ret;
+	}
 
 	if (st->chip_info->has_vref) {
-
-		/* If a device has an internal reference vref is optional */
-		if (st->chip_info->int_vref_uv) {
-			reg = devm_regulator_get_optional(&spi->dev, "vref");
-			if (IS_ERR(reg) && (PTR_ERR(reg) != -ENODEV))
-				return PTR_ERR(reg);
-		} else {
-			reg = devm_regulator_get(&spi->dev, "vref");
-			if (IS_ERR(reg))
-				return PTR_ERR(reg);
-		}
-
-		if (!IS_ERR(reg)) {
-			ret = regulator_enable(reg);
-			if (ret)
+		ret = devm_regulator_get_enable_read_voltage(&spi->dev, "vref");
+		if (ret < 0) {
+			/* Vref is optional if a device has an internal reference */
+			if (!st->chip_info->int_vref_uv || ret != -ENODEV)
 				return ret;
-
-			ret = devm_add_action_or_reset(&spi->dev,
-						       ad7476_reg_disable,
-						       reg);
-			if (ret)
-				return ret;
-			st->ref_reg = reg;
 		} else {
-			/*
-			 * Can only get here if device supports both internal
-			 * and external reference, but the regulator connected
-			 * to the external reference is not connected.
-			 * Set the reference regulator pointer to NULL to
-			 * indicate this.
-			 */
-			st->ref_reg = NULL;
+			st->scale_mv = ret / 1000;
 		}
 	}
 
+	if (!st->scale_mv)
+		st->scale_mv = st->chip_info->int_vref_uv / 1000;
+
 	if (st->chip_info->has_vdrive) {
 		ret = devm_regulator_get_enable(&spi->dev, "vdrive");
 		if (ret)
-- 
2.50.1


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[PATCH v4 03/11] iio: adc: ad7476: Use mV for internal reference

[Matti Vaittinen]

[-- Attachment #1: Type: text/plain, Size: 2864 bytes --]

The ad7476 supports some ICs with an internal reference voltage. For
those ICs the reference voltage has been hard-coded as micro volts, but
the value which is later used in code needs to be milli volts. This
results the need to divide hard coded voltage by 1000 before using it.

Simplify code by changing the hard-coded voltage to millivolts and by
dropping the division.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>

---
Revision history:
 v1 => :
 - No changes
---
 drivers/iio/adc/ad7476.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/iio/adc/ad7476.c b/drivers/iio/adc/ad7476.c
index f117aafd8fad..7b6d36999afc 100644
--- a/drivers/iio/adc/ad7476.c
+++ b/drivers/iio/adc/ad7476.c
@@ -27,7 +27,7 @@
 struct ad7476_state;
 
 struct ad7476_chip_info {
-	unsigned int			int_vref_uv;
+	unsigned int			int_vref_mv;
 	struct iio_chan_spec		channel[2];
 	/* channels used when convst gpio is defined */
 	struct iio_chan_spec		convst_channel[2];
@@ -172,7 +172,7 @@ static const struct ad7476_chip_info ad7091r_chip_info = {
 	.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
 	.convst_channel[0] = AD7091R_CONVST_CHAN(12),
 	.convst_channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
-	.int_vref_uv = 2500000,
+	.int_vref_mv = 2500,
 	.has_vref = true,
 	.reset = ad7091_reset,
 };
@@ -229,7 +229,7 @@ static const struct ad7476_chip_info ad7475_chip_info = {
 static const struct ad7476_chip_info ad7495_chip_info = {
 	.channel[0] = AD7476_CHAN(12),
 	.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
-	.int_vref_uv = 2500000,
+	.int_vref_mv = 2500,
 	.has_vdrive = true,
 };
 
@@ -295,7 +295,7 @@ static int ad7476_probe(struct spi_device *spi)
 		return -ENODEV;
 
 	/* Use VCC for reference voltage if vref / internal vref aren't used */
-	if (!st->chip_info->int_vref_uv && !st->chip_info->has_vref) {
+	if (!st->chip_info->int_vref_mv && !st->chip_info->has_vref) {
 		ret = devm_regulator_get_enable_read_voltage(&spi->dev, "vcc");
 		if (ret < 0)
 			return ret;
@@ -310,7 +310,7 @@ static int ad7476_probe(struct spi_device *spi)
 		ret = devm_regulator_get_enable_read_voltage(&spi->dev, "vref");
 		if (ret < 0) {
 			/* Vref is optional if a device has an internal reference */
-			if (!st->chip_info->int_vref_uv || ret != -ENODEV)
+			if (!st->chip_info->int_vref_mv || ret != -ENODEV)
 				return ret;
 		} else {
 			st->scale_mv = ret / 1000;
@@ -318,7 +318,7 @@ static int ad7476_probe(struct spi_device *spi)
 	}
 
 	if (!st->scale_mv)
-		st->scale_mv = st->chip_info->int_vref_uv / 1000;
+		st->scale_mv = st->chip_info->int_vref_mv;
 
 	if (st->chip_info->has_vdrive) {
 		ret = devm_regulator_get_enable(&spi->dev, "vdrive");
-- 
2.50.1


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[PATCH v4 04/11] iio: adc: ad7476: Use correct channel for bit info

[Matti Vaittinen]

[-- Attachment #1: Type: text/plain, Size: 1894 bytes --]

The ad7476 supports ADCs which use separate GPIO for starting the
conversion. For such devices, the driver uses different channel
information if the GPIO is found. The bit information is still always
used from the original (non 'convstart') channels.

This has not been causing problems because the bit information for the
'convstart' -channel and the 'normal' -channel is identical. It,
however, will cause issues if an IC has different characteristics for an
'convstart' -channel and regular channel. Furthermore, this will cause
problems if a device always requires the convstart GPIO and thus only
defines the convstart channel.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>

---
Revision history:
 v1 => :
 - No changes
---
 drivers/iio/adc/ad7476.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/adc/ad7476.c b/drivers/iio/adc/ad7476.c
index 7b6d36999afc..fc701267358e 100644
--- a/drivers/iio/adc/ad7476.c
+++ b/drivers/iio/adc/ad7476.c
@@ -121,8 +121,8 @@ static int ad7476_read_raw(struct iio_dev *indio_dev,
 
 		if (ret < 0)
 			return ret;
-		*val = (ret >> st->chip_info->channel[0].scan_type.shift) &
-			GENMASK(st->chip_info->channel[0].scan_type.realbits - 1, 0);
+		*val = (ret >> chan->scan_type.shift) &
+			GENMASK(chan->scan_type.realbits - 1, 0);
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
 		*val = st->scale_mv;
@@ -345,7 +345,7 @@ static int ad7476_probe(struct spi_device *spi)
 	/* Setup default message */
 
 	st->xfer.rx_buf = &st->data;
-	st->xfer.len = st->chip_info->channel[0].scan_type.storagebits / 8;
+	st->xfer.len = indio_dev->channels[0].scan_type.storagebits / 8;
 
 	spi_message_init(&st->msg);
 	spi_message_add_tail(&st->xfer, &st->msg);
-- 
2.50.1


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[PATCH v4 05/11] iio: adc: ad7476: use *_cansleep GPIO APIs

[Matti Vaittinen]

[-- Attachment #1: Type: text/plain, Size: 1578 bytes --]

The ad7476 driver supports ADCs which require a GPIO pin to be used to
start conversion. The GPIO line status seems to be always toggled from
a process context, either from the user-initiated "raw-read conversion",
or from a threaded IRQ handler. Furthermore, these ICs are connected via
SPI bus, which is usually implemented in a way that the access to the
device can sleep. The GPIO here is toggled from the same context which
is reading the results over SPI.

Thus it seems very likely these GPIOs are toggled from a context which
can sleep.

Swap the gpiod_set_value() to gpiod_set_value_cansleep() accordinlgy.

Suggested-by: Nuno Sá <noname.nuno@gmail.com>
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>

---
Revision history:
 v3 => :
 - No changes

 v2 => v3:
 - New patch
---
 drivers/iio/adc/ad7476.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/adc/ad7476.c b/drivers/iio/adc/ad7476.c
index fc701267358e..1445f0f599d9 100644
--- a/drivers/iio/adc/ad7476.c
+++ b/drivers/iio/adc/ad7476.c
@@ -57,9 +57,9 @@ static void ad7091_convst(struct ad7476_state *st)
 	if (!st->convst_gpio)
 		return;
 
-	gpiod_set_value(st->convst_gpio, 0);
+	gpiod_set_value_cansleep(st->convst_gpio, 0);
 	udelay(1); /* CONVST pulse width: 10 ns min */
-	gpiod_set_value(st->convst_gpio, 1);
+	gpiod_set_value_cansleep(st->convst_gpio, 1);
 	udelay(1); /* Conversion time: 650 ns max */
 }
 
-- 
2.50.1


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[PATCH v4 06/11] iio: adc: ad7476: Drop convstart chan_spec

[Matti Vaittinen]

[-- Attachment #1: Type: text/plain, Size: 4774 bytes --]

The ad7476 driver defines separate chan_spec structures for operation
with and without convstart GPIO. At quick glance this may seem as if the
driver did provide more than 1 data-channel to users - one for the
regular data, other for the data obtained with the convstart GPIO.

The only difference between the 'convstart' and 'non convstart'
-channels is presence / absence of the BIT(IIO_CHAN_INFO_RAW) in
channel's flags.

We can drop the convstart channel spec, and related convstart macro, by
allocating a mutable per driver instance channel spec and adding the flag
in probe if needed. This will simplify the driver with the cost of added
memory consumption.

Assuming there aren't systems with very many ADCs and very few
resources, this tradeoff seems worth making.

Simplify the driver by dropping the 'convstart' channel spec and
allocating the channel spec for each driver instance.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>

---
Revision history:
 v3 => :
 - No changes

 v2 => v3:
 - Use __set_bit() instead of |=
 - Swicth BUILD_BUG_ON to static_assert
 - Clarify a comment
 - Improve commit message

 v1 => v2:
 - New patch
---
 drivers/iio/adc/ad7476.c | 31 +++++++++++++++++++------------
 1 file changed, 19 insertions(+), 12 deletions(-)

diff --git a/drivers/iio/adc/ad7476.c b/drivers/iio/adc/ad7476.c
index 1445f0f599d9..ad9e629f0cbd 100644
--- a/drivers/iio/adc/ad7476.c
+++ b/drivers/iio/adc/ad7476.c
@@ -6,6 +6,7 @@
  * Copyright 2010 Analog Devices Inc.
  */
 
+#include <linux/bitops.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
@@ -29,8 +30,6 @@ struct ad7476_state;
 struct ad7476_chip_info {
 	unsigned int			int_vref_mv;
 	struct iio_chan_spec		channel[2];
-	/* channels used when convst gpio is defined */
-	struct iio_chan_spec		convst_channel[2];
 	void (*reset)(struct ad7476_state *);
 	bool				has_vref;
 	bool				has_vdrive;
@@ -42,6 +41,7 @@ struct ad7476_state {
 	struct gpio_desc		*convst_gpio;
 	struct spi_transfer		xfer;
 	struct spi_message		msg;
+	struct iio_chan_spec		channel[2];
 	int				scale_mv;
 	/*
 	 * DMA (thus cache coherency maintenance) may require the
@@ -154,24 +154,18 @@ static int ad7476_read_raw(struct iio_dev *indio_dev,
 #define AD7940_CHAN(bits) _AD7476_CHAN((bits), 15 - (bits), \
 		BIT(IIO_CHAN_INFO_RAW))
 #define AD7091R_CHAN(bits) _AD7476_CHAN((bits), 16 - (bits), 0)
-#define AD7091R_CONVST_CHAN(bits) _AD7476_CHAN((bits), 16 - (bits), \
-		BIT(IIO_CHAN_INFO_RAW))
 #define ADS786X_CHAN(bits) _AD7476_CHAN((bits), 12 - (bits), \
 		BIT(IIO_CHAN_INFO_RAW))
 
 static const struct ad7476_chip_info ad7091_chip_info = {
 	.channel[0] = AD7091R_CHAN(12),
 	.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
-	.convst_channel[0] = AD7091R_CONVST_CHAN(12),
-	.convst_channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
 	.reset = ad7091_reset,
 };
 
 static const struct ad7476_chip_info ad7091r_chip_info = {
 	.channel[0] = AD7091R_CHAN(12),
 	.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
-	.convst_channel[0] = AD7091R_CONVST_CHAN(12),
-	.convst_channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
 	.int_vref_mv = 2500,
 	.has_vref = true,
 	.reset = ad7091_reset,
@@ -282,6 +276,7 @@ static int ad7476_probe(struct spi_device *spi)
 {
 	struct ad7476_state *st;
 	struct iio_dev *indio_dev;
+	unsigned int i;
 	int ret;
 
 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
@@ -332,16 +327,28 @@ static int ad7476_probe(struct spi_device *spi)
 	if (IS_ERR(st->convst_gpio))
 		return PTR_ERR(st->convst_gpio);
 
+	/*
+	 * This will never happen. Unless someone changes the channel specs
+	 * in this driver. And if someone does, without changing the loop
+	 * below, then we'd better immediately produce a big fat error, before
+	 * the change proceeds from that developer's table.
+	 */
+	static_assert(ARRAY_SIZE(st->channel) == ARRAY_SIZE(st->chip_info->channel));
+	for (i = 0; i < ARRAY_SIZE(st->channel); i++) {
+		st->channel[i] = st->chip_info->channel[i];
+		if (st->convst_gpio)
+			__set_bit(IIO_CHAN_INFO_RAW,
+				  &st->channel[i].info_mask_separate);
+	}
+
 	st->spi = spi;
 
 	indio_dev->name = spi_get_device_id(spi)->name;
 	indio_dev->modes = INDIO_DIRECT_MODE;
-	indio_dev->channels = st->chip_info->channel;
-	indio_dev->num_channels = 2;
+	indio_dev->channels = st->channel;
+	indio_dev->num_channels = ARRAY_SIZE(st->channel);
 	indio_dev->info = &ad7476_info;
 
-	if (st->convst_gpio)
-		indio_dev->channels = st->chip_info->convst_channel;
 	/* Setup default message */
 
 	st->xfer.rx_buf = &st->data;
-- 
2.50.1


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[PATCH v4 07/11] iio: adc: ad7476: Conditionally call convstart

[Matti Vaittinen]

[-- Attachment #1: Type: text/plain, Size: 3227 bytes --]

The ad7476 supports two IC variants which may have a 'convstart' -GPIO
for starting the conversion. Currently the driver calls a function which
tries to access the GPIO for all of the IC variants, whether they
support 'convstart' or not. This is not an error because this function
returns early if GPIO information is not populated.

We can do a tad better by calling this function only for the ICs which
have the 'convstart' by providing a function pointer to the convstart
function from the chip_info structure, and calling this function only
for the ICs which have the function pointer set.

This does also allow to support ICs which require different convstart
handling than the currently supported ICs.

Call convstart function only on the ICs which can support it and allow
IC-specific convstart functions for the ICs which require different
handling.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>

---
Revision history:
 v3 => :
 - No changes

 v2 => v3:
 - Use indirect call to convstart (via function pointer) also from the
   ad7476_scan_direct().
 - Adapt to the change which returned the chip_info pointer back to the
   driver's state structure.

 v1 => v2:
 - Adapt to the change which removed the chip_info pointer from the
  driver's state structure.

The follow-up patch adding support for the ROHM BD79105 will bring
different 'convstart' functions in use. The IC specific pointer will
also prepare the way for this.
---
 drivers/iio/adc/ad7476.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/adc/ad7476.c b/drivers/iio/adc/ad7476.c
index ad9e629f0cbd..6cb2cbeafbd3 100644
--- a/drivers/iio/adc/ad7476.c
+++ b/drivers/iio/adc/ad7476.c
@@ -31,6 +31,7 @@ struct ad7476_chip_info {
 	unsigned int			int_vref_mv;
 	struct iio_chan_spec		channel[2];
 	void (*reset)(struct ad7476_state *);
+	void (*conversion_pre_op)(struct ad7476_state *st);
 	bool				has_vref;
 	bool				has_vdrive;
 };
@@ -70,7 +71,8 @@ static irqreturn_t ad7476_trigger_handler(int irq, void  *p)
 	struct ad7476_state *st = iio_priv(indio_dev);
 	int b_sent;
 
-	ad7091_convst(st);
+	if (st->chip_info->conversion_pre_op)
+		st->chip_info->conversion_pre_op(st);
 
 	b_sent = spi_sync(st->spi, &st->msg);
 	if (b_sent < 0)
@@ -94,7 +96,8 @@ static int ad7476_scan_direct(struct ad7476_state *st)
 {
 	int ret;
 
-	ad7091_convst(st);
+	if (st->chip_info->conversion_pre_op)
+		st->chip_info->conversion_pre_op(st);
 
 	ret = spi_sync(st->spi, &st->msg);
 	if (ret)
@@ -160,12 +163,14 @@ static int ad7476_read_raw(struct iio_dev *indio_dev,
 static const struct ad7476_chip_info ad7091_chip_info = {
 	.channel[0] = AD7091R_CHAN(12),
 	.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+	.conversion_pre_op = ad7091_convst,
 	.reset = ad7091_reset,
 };
 
 static const struct ad7476_chip_info ad7091r_chip_info = {
 	.channel[0] = AD7091R_CHAN(12),
 	.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+	.conversion_pre_op = ad7091_convst,
 	.int_vref_mv = 2500,
 	.has_vref = true,
 	.reset = ad7091_reset,
-- 
2.50.1


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[PATCH v4 08/11] dt-bindings: iio: adc: ad7476: Drop redundant prop: true

[Matti Vaittinen]

[-- Attachment #1: Type: text/plain, Size: 2739 bytes --]

The ad7476 supports a few variants with different power-supplies and
control GPIOs. The binding first unconditionally introduces all the
properties, and later sets them 'true' or 'false' based on the
combatible.

The 'true' seems to be implied by the initial property introduction so
the 'true' -branches in later conditional handling (based on the
compatible) can be omitted.

Drop the redundant true -branches.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>

---
Revision history:
 v3 => v4:
 - New patch
---
 .../bindings/iio/adc/adi,ad7476.yaml          | 54 +++++++++----------
 1 file changed, 24 insertions(+), 30 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
index d0cb32f136e5..db2a9662bd94 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
@@ -106,19 +106,17 @@ allOf:
         - vcc-supply
   # Devices with a vref
   - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - adi,ad7091r
-              - adi,ad7273
-              - adi,ad7274
-              - adi,ad7475
-              - lltc,ltc2314-14
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - adi,ad7091r
+                - adi,ad7273
+                - adi,ad7274
+                - adi,ad7475
+                - lltc,ltc2314-14
     then:
-      properties:
-        vref-supply: true
-    else:
       properties:
         vref-supply: false
   # Devices with a vref where it is not optional
@@ -135,29 +133,25 @@ allOf:
       required:
         - vref-supply
   - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - adi,ad7475
-              - adi,ad7495
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - adi,ad7475
+                - adi,ad7495
     then:
-      properties:
-        vdrive-supply: true
-    else:
       properties:
         vdrive-supply: false
   - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - adi,ad7091
-              - adi,ad7091r
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - adi,ad7091
+                - adi,ad7091r
     then:
-      properties:
-        adi,conversion-start-gpios: true
-    else:
       properties:
         adi,conversion-start-gpios: false
 
-- 
2.50.1


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[PATCH v4 09/11] dt-bindings: iio: adc: ad7476: Add ROHM bd79105

[Matti Vaittinen]

[-- Attachment #1: Type: text/plain, Size: 4130 bytes --]

The ROHM BD79105 is a simple, 16-bit, 1-channel ADC with a 'CONVSTART'
pin used to start the ADC conversion. Other than the 'CONVSTART', there
are 3 supply pins (one used as a reference), analog inputs, ground and
communication pins. It's worth noting that the pin somewhat confusingly
labeled as 'DIN', is a pin which should be used as a chip-select. The IC
does not have any writable registers.

The device is designed so that the output pin can, in addition to
outputting the data, be used as a 'data-ready'-IRQ. There are cases
where the IRQ can't be used (because it is delivered via SPI data-line).
Hence, some systems may use a GPIO for polling the data readiness.

Add a compatible for the bd79105 and add the data-ready GPIO to the
binding.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>

---
Revision history:
 v3 => v4:
 - Drop the redundant 'true' branches
 v2 => v3:
 - No changes
 v1 => v2:
 - BD79105 can provide data-ready IRQ (or GPIO) via DOUT-pin.
---
 .../bindings/iio/adc/adi,ad7476.yaml          | 52 +++++++++++++++++++
 1 file changed, 52 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
index db2a9662bd94..55880191c511 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
@@ -41,6 +41,7 @@ properties:
               - adi,ad7910
               - adi,ad7920
               - adi,ad7940
+              - rohm,bd79105
               - ti,adc081s
               - ti,adc101s
               - ti,adc121s
@@ -55,6 +56,11 @@ properties:
   reg:
     maxItems: 1
 
+  interrupts:
+    description:
+      The data-ready interrupt. Provided via DOUT pin.
+    maxItems: 1
+
   vcc-supply:
     description:
       Main powersupply voltage for the chips, sometimes referred to as VDD on
@@ -75,6 +81,10 @@ properties:
     description: A GPIO used to trigger the start of a conversion
     maxItems: 1
 
+  rdy-gpios:
+    description: A GPIO for detecting the data-ready.
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -82,6 +92,20 @@ required:
 allOf:
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
+# Devices with an IRQ
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rohm,bd79105
+    then:
+      properties:
+        interrupts: true
+    else:
+      properties:
+        interrupts: false
+
   # Devices where reference is vcc
   - if:
       properties:
@@ -116,6 +140,7 @@ allOf:
                 - adi,ad7274
                 - adi,ad7475
                 - lltc,ltc2314-14
+                - rohm,bd79105
     then:
       properties:
         vref-supply: false
@@ -129,6 +154,7 @@ allOf:
               - adi,ad7274
               - adi,ad7475
               - lltc,ltc2314-14
+              - rohm,bd79105
     then:
       required:
         - vref-supply
@@ -140,9 +166,23 @@ allOf:
               enum:
                 - adi,ad7475
                 - adi,ad7495
+                - rohm,bd79105
     then:
       properties:
         vdrive-supply: false
+
+  # Devices which support polling the data-ready via GPIO
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - rohm,bd79105
+    then:
+      properties:
+        rdy-gpios: false
+
   - if:
       not:
         properties:
@@ -151,10 +191,22 @@ allOf:
               enum:
                 - adi,ad7091
                 - adi,ad7091r
+                - rohm,bd79105
     then:
       properties:
         adi,conversion-start-gpios: false
 
+  # Devices with a convstart GPIO where it is not optional
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rohm,bd79105
+    then:
+      required:
+        - adi,conversion-start-gpios
+
 unevaluatedProperties: false
 
 examples:
-- 
2.50.1


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[PATCH v4 10/11] iio: adc: ad7476: Support ROHM BD79105

[Matti Vaittinen]

[-- Attachment #1: Type: text/plain, Size: 4839 bytes --]

The ROHM BD79105 is a simple 16-bit ADC accessible via SPI*.

The BD79105 has a CONVSTART pin, which must be set high to start the ADC
conversion. Unlike with the ad7091 and ad7091r which also have a
CONVSTART pin, the BD79105 requires that the pin must remain high also
for the duration of the SPI access.

(*) Couple of words about the SPI. The BD79105 has pins named as
CONVSTART, SCLK, DIN and DOUT. For the curious reader, DIN is not SPI
ISO.

DIN is a signal which can be used as a chip-select. When DIN is pulled
low, the ADC will output the completed measurement via DOUT as SCLK is
clocked. According to the data-sheet, the DIN can also be used for
daisy-chaining multiple ADCs. Furthermore, DOUT can be used also for a
'data-ready' -IRQ. These modes aren't supported by this driver.

Support reading ADC scale and data from the BD79105 using SPI, when DIN
is used as a chip-select.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>

---
Revision history:
 v3 => :
 - No changes

 v2 => v3:
 - Check for missing convstart GPIO at probe.
 - Use indirect call to convstart (via function pointer) also from the
   ad7476_scan_direct().

 v1 => v2:
 - Fix the conversion delay for the BD79105
 - Drop unnecessary GPIO check from the convstart disable
 - Drop unintended whitespace change
 - Fix spelling
---
 drivers/iio/adc/ad7476.c | 39 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/drivers/iio/adc/ad7476.c b/drivers/iio/adc/ad7476.c
index 6cb2cbeafbd3..1bec6657394c 100644
--- a/drivers/iio/adc/ad7476.c
+++ b/drivers/iio/adc/ad7476.c
@@ -32,8 +32,10 @@ struct ad7476_chip_info {
 	struct iio_chan_spec		channel[2];
 	void (*reset)(struct ad7476_state *);
 	void (*conversion_pre_op)(struct ad7476_state *st);
+	void (*conversion_post_op)(struct ad7476_state *st);
 	bool				has_vref;
 	bool				has_vdrive;
+	bool				convstart_required;
 };
 
 struct ad7476_state {
@@ -64,6 +66,18 @@ static void ad7091_convst(struct ad7476_state *st)
 	udelay(1); /* Conversion time: 650 ns max */
 }
 
+static void bd79105_convst_disable(struct ad7476_state *st)
+{
+	gpiod_set_value_cansleep(st->convst_gpio, 0);
+}
+
+static void bd79105_convst_enable(struct ad7476_state *st)
+{
+	gpiod_set_value_cansleep(st->convst_gpio, 1);
+	/* Worst case, 2790 ns required for conversion */
+	ndelay(2790);
+}
+
 static irqreturn_t ad7476_trigger_handler(int irq, void  *p)
 {
 	struct iio_poll_func *pf = p;
@@ -81,6 +95,8 @@ static irqreturn_t ad7476_trigger_handler(int irq, void  *p)
 	iio_push_to_buffers_with_ts(indio_dev, st->data, sizeof(st->data),
 				    iio_get_time_ns(indio_dev));
 done:
+	if (st->chip_info->conversion_post_op)
+		st->chip_info->conversion_post_op(st);
 	iio_trigger_notify_done(indio_dev->trig);
 
 	return IRQ_HANDLED;
@@ -103,6 +119,9 @@ static int ad7476_scan_direct(struct ad7476_state *st)
 	if (ret)
 		return ret;
 
+	if (st->chip_info->conversion_post_op)
+		st->chip_info->conversion_post_op(st);
+
 	return be16_to_cpup((__be16 *)st->data);
 }
 
@@ -273,6 +292,22 @@ static const struct ad7476_chip_info ltc2314_14_chip_info = {
 	.has_vref = true,
 };
 
+static const struct ad7476_chip_info bd79105_chip_info = {
+	.channel[0] = AD7091R_CHAN(16),
+	.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+	/*
+	 * The BD79105 starts ADC data conversion when the CONVSTART line is
+	 * set HIGH. The CONVSTART must be kept HIGH until the data has been
+	 * read from the ADC.
+	 */
+	.conversion_pre_op = bd79105_convst_enable,
+	.conversion_post_op = bd79105_convst_disable,
+	/* BD79105 won't do conversion without convstart */
+	.convstart_required = true,
+	.has_vref = true,
+	.has_vdrive = true,
+};
+
 static const struct iio_info ad7476_info = {
 	.read_raw = &ad7476_read_raw,
 };
@@ -332,6 +367,9 @@ static int ad7476_probe(struct spi_device *spi)
 	if (IS_ERR(st->convst_gpio))
 		return PTR_ERR(st->convst_gpio);
 
+	if (st->chip_info->convstart_required && !st->convst_gpio)
+		return dev_err_probe(&spi->dev, -EINVAL, "No convstart GPIO\n");
+
 	/*
 	 * This will never happen. Unless someone changes the channel specs
 	 * in this driver. And if someone does, without changing the loop
@@ -401,6 +439,7 @@ static const struct spi_device_id ad7476_id[] = {
 	{ "ads7866", (kernel_ulong_t)&ads7866_chip_info },
 	{ "ads7867", (kernel_ulong_t)&ads7867_chip_info },
 	{ "ads7868", (kernel_ulong_t)&ads7868_chip_info },
+	{ "bd79105", (kernel_ulong_t)&bd79105_chip_info },
 	/*
 	 * The ROHM BU79100G is identical to the TI's ADS7866 from the software
 	 * point of view. The binding document mandates the ADS7866 to be
-- 
2.50.1


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[PATCH v4 11/11] MAINTAINERS: A driver for simple 1-channel SPI ADCs

[Matti Vaittinen]

[-- Attachment #1: Type: text/plain, Size: 1027 bytes --]

Add undersigned as a maintainer for the ad7476.c which supports a few
simple 1-channel ADC connected to SPI.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>

---
Revision history:
 v1 => :
 - No changes.

I'll try to keep this on eye.

I only have access to the ROHM BD79105 and BU79100g. I would welcome
anyone with access to other supported ADCs (and time, energy and the
knowledge) to join me. :)
---
 MAINTAINERS | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index f8c8f682edf6..36fa6333f7b5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -455,6 +455,11 @@ F:	Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
 F:	Documentation/iio/ad7380.rst
 F:	drivers/iio/adc/ad7380.c
 
+AD7476 ADC DRIVER FOR VARIOUS SIMPLE 1-CHANNEL SPI ADCs
+M:	Matti Vaittinen <mazziesaccount@gmail.com>
+S:	Maintained
+F:	drivers/iio/adc/ad7476.c
+
 AD7877 TOUCHSCREEN DRIVER
 M:	Michael Hennerich <michael.hennerich@analog.com>
 S:	Supported
-- 
2.50.1


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH v4 08/11] dt-bindings: iio: adc: ad7476: Drop redundant prop: true

[Krzysztof Kozlowski]

On Mon, Aug 11, 2025 at 11:51:50AM +0300, Matti Vaittinen wrote:
> The ad7476 supports a few variants with different power-supplies and
> control GPIOs. The binding first unconditionally introduces all the
> properties, and later sets them 'true' or 'false' based on the
> combatible.
> 
> The 'true' seems to be implied by the initial property introduction so
> the 'true' -branches in later conditional handling (based on the
> compatible) can be omitted.
> 
> Drop the redundant true -branches.
> 
> Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
> 

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v4 09/11] dt-bindings: iio: adc: ad7476: Add ROHM bd79105

[Krzysztof Kozlowski]

On Mon, Aug 11, 2025 at 11:52:04AM +0300, Matti Vaittinen wrote:
> The ROHM BD79105 is a simple, 16-bit, 1-channel ADC with a 'CONVSTART'
> pin used to start the ADC conversion. Other than the 'CONVSTART', there
> are 3 supply pins (one used as a reference), analog inputs, ground and
> communication pins. It's worth noting that the pin somewhat confusingly
> labeled as 'DIN', is a pin which should be used as a chip-select. The IC
> does not have any writable registers.
> 
> The device is designed so that the output pin can, in addition to
> outputting the data, be used as a 'data-ready'-IRQ. There are cases
> where the IRQ can't be used (because it is delivered via SPI data-line).
> Hence, some systems may use a GPIO for polling the data readiness.
> 
> Add a compatible for the bd79105 and add the data-ready GPIO to the
> binding.
> 
> Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
> 

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v4 00/11] Support ROHM BD79105 ADC

[Jonathan Cameron]

On Mon, 11 Aug 2025 11:50:00 +0300
Matti Vaittinen <mazziesaccount@gmail.com> wrote:

> Add support for the ROHM BD79105 ADC
> (and do some minor simplifications to the ad7476 driver while at it).
> 
> The first 2 patches were originally sent as an RFC:
> https://lore.kernel.org/all/cover.1754041258.git.mazziesaccount@gmail.com/

Hi Matti

Applied to the togreg branch of iio.git. I'll initially push out as testing
though to get some build coverage before there is any chance of making
a mess of linux nex.t

Thanks

Jonathan

> 
> Revision history:
>   v3 => v4:
>    - Add patch:
>      8/11 "dt-bindings: iio: adc: ad7476: Drop redundant prop: true"
>    - Drop redundant true -branches also from the bd79105 binding
>    - Other patches unchanged.
> 
>   v2 => v3:
>    - Drop 5/10 "Limit the scope of the chip_info"
>    - Add 5/10 "use *_cansleep GPIO APIs"
>    - Multiple fixes as suggested during v2 review. More accurate
>      changelog included in individual patches
> 
>   v1 => v2:
>    - Two new patches:
>      5/10 "Limit the scope of the chip_info" and
>      6/10 "Drop convstart chan_spec"
>      Please, let me know if you think some of the changes should be
>      squashed.
>    - Multiple fixes as suggested during v1 review. More accurate
>      changelog included in individual patches
> 
>   Simplification RFC => ROHM BD79105 support series v1:
>    - Use spi_get_device_match_data()
>    - Fix uV to mV conversion
>    - Rewording of commit message
>    - Added patches 3 to 8.
> 
> Matti Vaittinen (11):
>   iio: adc: ad7476: Simplify chip type detection
>   iio: adc: ad7476: Simplify scale handling
>   iio: adc: ad7476: Use mV for internal reference
>   iio: adc: ad7476: Use correct channel for bit info
>   iio: adc: ad7476: use *_cansleep GPIO APIs
>   iio: adc: ad7476: Drop convstart chan_spec
>   iio: adc: ad7476: Conditionally call convstart
>   dt-bindings: iio: adc: ad7476: Drop redundant prop: true
>   dt-bindings: iio: adc: ad7476: Add ROHM bd79105
>   iio: adc: ad7476: Support ROHM BD79105
>   MAINTAINERS: A driver for simple 1-channel SPI ADCs
> 
>  .../bindings/iio/adc/adi,ad7476.yaml          | 100 +++-
>  MAINTAINERS                                   |   5 +
>  drivers/iio/adc/ad7476.c                      | 461 +++++++++---------
>  3 files changed, 311 insertions(+), 255 deletions(-)
> 
> 
> base-commit: 93ef68672bb353838cdf8314be8765c05768916b