RE: [PATCH v2] iio: magnetometer: yas530: Use signed integer type for clamp limits

[David Laight <David.Laight@ACULAB.COM>]

From: Jakob Hauser

Copying Andrew M - he might want to take this through his mm tree.

> Sent: 29 November 2024 21:25
> 
> In the function yas537_measure() there is a clamp_val() with limits of
> -BIT(13) and  BIT(13) - 1. The input clamp value h[] is of type s32. The BIT()
> is of type unsigned long integer due to its define in include/vdso/bits.h.
> The lower limit -BIT(13) is recognized as -8192 but expressed as an unsigned
> long integer. The size of an unsigned long integer differs between 32-bit and
> 64-bit architectures. Converting this to type s32 may lead to undesired
> behavior.
> 
> Additionally, in the calculation lines h[0], h[1] and h[2] the unsigned long
> integer divisor BIT(13) causes an unsigned division, shifting the left-hand
> side of the equation back and forth, possibly ending up in large positive
> values instead of negative values on 32-bit architectures.
> 
> To solve those two issues, declare a signed integer with a value of BIT(13).
> 
> There is another omission in the clamp line: clamp_val() returns a value and
> it's going nowhere here. Self-assign it to h[i] to make use of the clamp
> macro.
> 
> Finally, replace clamp_val() macro by clamp() because after changing the limits
> from type unsigned long integer to signed integer it's fine that way.
> 
> Reported-by: kernel test robot <lkp@intel.com>
> Closes: https://lore.kernel.org/oe-kbuild-all/202411230458.dhZwh3TT-lkp@intel.com/
> Closes: https://lore.kernel.org/oe-kbuild-all/202411282222.oF0B4110-lkp@intel.com/
> Fixes: 65f79b501030 ("iio: magnetometer: yas530: Add YAS537 variant")
> Cc: David Laight <david.laight@aculab.com>
> Signed-off-by: Jakob Hauser <jahau@rocketmail.com>

Reviewed-by: David Laight <david.laight@aculab.com>

I THINK all the other BIT() and GENMASK() are ok.
The code also rather heavily relies on u16 being promoted to 'signed int'.

	David


> ---
> The patch is based on torvalds/linux v6.12.
> 
> The calculation lines h[0], h[1] and h[2] exceed the limit of 80 characters per
> line. In terms of readability I would prefer to keep it that way.
> 
> Changes in v2:
>  - Self-assigned the clamp macro to h[i].
>  - Changed from clamp_val() macro to clamp().
>  - In commit message added issues on divisor BIT(13) and missing clamp
>    assignment.
>  - In tags added another (duplicate) report by the kernel test robot.
> 
> Link to v1: https://lore.kernel.org/linux-iio/20241126234021.19749-1-jahau@rocketmail.com/T/#t
> ---
>  drivers/iio/magnetometer/yamaha-yas530.c | 13 +++++++------
>  1 file changed, 7 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/iio/magnetometer/yamaha-yas530.c b/drivers/iio/magnetometer/yamaha-yas530.c
> index 65011a8598d3..c55a38650c0d 100644
> --- a/drivers/iio/magnetometer/yamaha-yas530.c
> +++ b/drivers/iio/magnetometer/yamaha-yas530.c
> @@ -372,6 +372,7 @@ static int yas537_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y
>  	u8 data[8];
>  	u16 xy1y2[3];
>  	s32 h[3], s[3];
> +	int half_range = BIT(13);
>  	int i, ret;
> 
>  	mutex_lock(&yas5xx->lock);
> @@ -406,13 +407,13 @@ static int yas537_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y
>  	/* The second version of YAS537 needs to include calibration coefficients */
>  	if (yas5xx->version == YAS537_VERSION_1) {
>  		for (i = 0; i < 3; i++)
> -			s[i] = xy1y2[i] - BIT(13);
> -		h[0] = (c->k *   (128 * s[0] + c->a2 * s[1] + c->a3 * s[2])) / BIT(13);
> -		h[1] = (c->k * (c->a4 * s[0] + c->a5 * s[1] + c->a6 * s[2])) / BIT(13);
> -		h[2] = (c->k * (c->a7 * s[0] + c->a8 * s[1] + c->a9 * s[2])) / BIT(13);
> +			s[i] = xy1y2[i] - half_range;
> +		h[0] = (c->k *   (128 * s[0] + c->a2 * s[1] + c->a3 * s[2])) / half_range;
> +		h[1] = (c->k * (c->a4 * s[0] + c->a5 * s[1] + c->a6 * s[2])) / half_range;
> +		h[2] = (c->k * (c->a7 * s[0] + c->a8 * s[1] + c->a9 * s[2])) / half_range;
>  		for (i = 0; i < 3; i++) {
> -			clamp_val(h[i], -BIT(13), BIT(13) - 1);
> -			xy1y2[i] = h[i] + BIT(13);
> +			h[i] = clamp(h[i], -half_range, half_range - 1);
> +			xy1y2[i] = h[i] + half_range;
>  		}
>  	}
> 
> --
> 2.43.0

-
Registered Address Lakeside, Bramley Road, Mount Farm, Milton Keynes, MK1 1PT, UK
Registration No: 1397386 (Wales)