Linux IIO development
 help / color / mirror / Atom feed
 messages from 2025-04-21 21:38:53 to 2025-04-25 21:09:41 UTC [more...]

[PATCH v3 0/6] iio: introduce IIO_DECLARE_BUFFER_WITH_TS
 2025-04-25 21:08 UTC  (4+ messages)
` [PATCH v3 1/6] iio: introduce IIO_DECLARE_BUFFER_WITH_TS macros
` [PATCH v3 2/6] iio: adc: ad4695: use u16 for buffer elements
` [PATCH v3 3/6] iio: adc: ad4695: use IIO_DECLARE_DMA_BUFFER_WITH_TS

[PATCH v2 0/5] Add support for AD4052 device family
 2025-04-25 20:58 UTC  (10+ messages)
` [PATCH v2 1/5] Documentation: ABI: add oversampling frequency in sysfs-bus-iio
` [PATCH v2 2/5] iio: code: mark iio_dev as const in iio_buffer_enabled
` [PATCH v2 3/5] dt-bindings: iio: adc: Add adi,ad4052
` [PATCH v2 4/5] docs: iio: new docs for ad4052 driver
` [PATCH v2 5/5] iio: adc: add support for ad4052

[PATCH 1/2] dt-bindings: iio: dac: ad7293: add vrefin support
 2025-04-25 20:09 UTC  (4+ messages)
` [PATCH 2/2] iio: dac: ad7293: add adc reference configuration

[PATCH] iio: adc: ad7173: fix compiling without gpiolib
 2025-04-25 18:08 UTC  (4+ messages)

[PATCH v6 0/3] Add driver for AD3530R and AD3531R DACs
 2025-04-25 16:48 UTC  (5+ messages)
` [PATCH v6 1/3] iio: ABI: add new DAC powerdown mode
` [PATCH v6 2/3] dt-bindings: iio: dac: Add adi,ad3530r.yaml
` [PATCH v6 3/3] iio: dac: ad3530r: Add driver for AD3530R and AD3531R

[PATCH v1 0/1] iio: adc: ad7192: Refactor filter config
 2025-04-25 15:43 UTC  (4+ messages)
` [PATCH v1 1/1] "

[PATCH v4 0/2] staging: iio: frequency: ad9832: Fix and
 2025-04-25 13:18 UTC  (7+ messages)
` [PATCH v4 1/2] staging: iio: frequency: ad9832: Use SLEEP bit instead of RESET to disable output
` [PATCH v4 2/2] staging: iio: frequency: ad9832: Refactor powerdown control

[PATCH v4 0/8] Add STM32MP25 LPTIM support: MFD, PWM, IIO, counter, clocksource
 2025-04-25 12:50 UTC  (5+ messages)
` [PATCH v4 2/8] mfd: stm32-lptimer: add support for stm32mp25

[PATCH v5 0/7] Add STM32MP25 LPTIM support: MFD, PWM, IIO, counter, clocksource
 2025-04-25 12:47 UTC  (8+ messages)
` [PATCH v5 1/7] dt-bindings: mfd: stm32-lptimer: add support for stm32mp25
` [PATCH v5 2/7] "
` [PATCH v5 3/7] clocksource: "
` [PATCH v5 4/7] pwm: stm32-lp: "
` [PATCH v5 5/7] arm64: defconfig: enable STM32 LP timer clockevent driver
` [PATCH v5 6/7] arm64: dts: st: add low-power timer nodes on stm32mp251
` [PATCH v5 7/7] arm64: dts: st: use lptimer3 as tick broadcast source on stm32mp257f-ev1

[PATCH v3 00/11] Add support for AD4080 ADC
 2025-04-25 11:25 UTC  (12+ messages)
` [PATCH v3 01/11] iio: backend: add support for filter config
` [PATCH v3 02/11] iio: backend: add support for data alignment
` [PATCH v3 03/11] iio: backend: add support for sync status
` [PATCH v3 04/11] iio: backend: add support for number of lanes
` [PATCH v3 05/11] dt-bindings: iio: adc: add ad408x axi variant
` [PATCH v3 06/11] iio: adc: adi-axi-adc: add filter type config
` [PATCH v3 07/11] iio: adc: adi-axi-adc: add sync enable/disable
` [PATCH v3 08/11] iio: adc: adi-axi-adc: add sync status
` [PATCH v3 09/11] iio: adc: adi-axi-adc: add num lanes support
` [PATCH v3 10/11] dt-bindings: iio: adc: add ad4080
` [PATCH v3 11/11] iio: adc: ad4080: add driver support

[PATCH v5 0/3] Add driver for AD3530R and AD3531R DACs
 2025-04-25  8:26 UTC  (15+ messages)
` [PATCH v5 2/3] dt-bindings: iio: dac: Add adi,ad3530r.yaml
` [PATCH v5 3/3] iio: dac: ad3530r: Add driver for AD3530R and AD3531R

[PATCH v2] iio: adc: ad7091r-base: Move reg volatility check to new macro
 2025-04-25  8:24 UTC  (4+ messages)

[PATCH v4 0/4] add support for winsen MHZ19B CO2 sensor
 2025-04-25  8:22 UTC  (11+ messages)
` [PATCH v4 3/4] iio: chemical: "

[PATCH v3 0/3] Fix and refactor output disable logic
 2025-04-25  8:19 UTC  (11+ messages)
` [PATCH v3 2/3] staging: iio: ad9832: Refactor powerdown control
` [PATCH v3 3/3] staging: iio: ad9832: Add minor improvements to ad9832_write_powerdown

[PATCH] iio: adc: ti-ads1119: Prevent concurrent access during
 2025-04-25  8:14 UTC  (8+ messages)

[PULL] IIO: 1st set of fixes for the 6.15 cycle
 2025-04-25  8:03 UTC 

[PATCH v2 00/13] Add support for AD4080 ADC
 2025-04-25  7:56 UTC  (6+ messages)
` [PATCH v2 13/13] iio: adc: ad4080: add driver support

[PATCH 0/3] BMI270: Add support for step counter and motion events
 2025-04-25  5:25 UTC  (7+ messages)
` [PATCH 1/3] iio: imu: bmi270: add channel for step counter
` [PATCH 2/3] iio: imu: bmi270: add step counter watermark event
` [PATCH 3/3] iio: imu: bmi270: add support for motion events

[PATCH v5] iio: adc: stm32: add oversampling support
 2025-04-24 17:01 UTC  (3+ messages)

[PATCH] iio: adc: PAC1934: fix typo in documentation link
 2025-04-24 13:43 UTC  (2+ messages)

[PATCH v3] iio: light: apds9306: Refactor threshold get/set functions to use helper
 2025-04-24 13:04 UTC  (2+ messages)

[PATCH v7 0/2] iio: adc: add Nuvoton NCT7201 ADC driver
 2025-04-24 10:39 UTC  (4+ messages)
` [PATCH v7 1/2] dt-bindings: iio: adc: add NCT7201 ADCs
` [PATCH v7 2/2] iio: adc: add support for Nuvoton NCT7201

[PATCH v2 0/6] iio: introduce IIO_DECLARE_BUFFER_WITH_TS
 2025-04-24  7:44 UTC  (20+ messages)
` [PATCH v2 1/6] iio: introduce IIO_DECLARE_BUFFER_WITH_TS macros
` [PATCH v2 2/6] iio: adc: ad4695: use u16 for buffer elements
` [PATCH v2 3/6] iio: adc: ad4695: use IIO_DECLARE_BUFFER_WITH_TS
` [PATCH v2 4/6] iio: adc: ad7380: "
` [PATCH v2 5/6] iio: accel: sca3300: "
` [PATCH v2 6/6] iio: adc: at91-sama5d2: "

[PATCH v6 0/4] Add support for Winsen MHZ19B CO2 sensor
 2025-04-24  5:19 UTC  (7+ messages)
` [PATCH v6 1/4] dt-bindings: Add Winsen to the vendor prefixes
` [PATCH v6 2/4] dt-bindings: Add device tree support for Winsen MHZ19B CO2 sensor
` [PATCH v6 3/4] iio: chemical: Add "
` [PATCH v6 4/4] MAINTAINERS: Add WINSEN MHZ19B

[PATCH] iio: light: zopt2201: Remove code duplication in scale write functions
 2025-04-24  0:21 UTC 

[PATCH] drivers: iio: cros_ec_sensors: Flush changing the FIFO timeout
 2025-04-23 22:05 UTC  (4+ messages)
` [PATCH v3] iio: cros_ec_sensors: Flush when "

[PATCH v4] iio: cros_ec_sensors: Flush when changing the FIFO timeout
 2025-04-23 22:05 UTC 

[PATCH v1] iio: accel: kxcjk-1013: Deduplicate setup interrupt functions
 2025-04-23 20:46 UTC 

max1363 : Warnings from iio_sanity_check_avail_scan_masks()
 2025-04-23 20:23 UTC 

[PATCH] dt-bindings:iio:adc:st,spear600-adc: txt to yaml format conversion
 2025-04-23 20:12 UTC  (3+ messages)

[PATCH 0/2] iio: adc: ti-ads1298 & Kconfig
 2025-04-23 18:46 UTC  (3+ messages)
` [PATCH 1/2] iio: adc: ti-ads1298: Add safe usage guarantee for device communication
` [PATCH 2/2] iio: adc: Kconfig: add kfifo dependency to fix module build

[PATCH] iio: accel: sca3000: remove duplicated code in sca3000_read_data
 2025-04-23 18:13 UTC  (2+ messages)

[PATCH] iio: adc: imx93_adc: load calibrated values even calibration failed
 2025-04-23 16:43 UTC  (2+ messages)

[PATCH 0/3] MCP3911 fixes
 2025-04-23 16:39 UTC  (6+ messages)
` [PATCH 1/3] iio: adc: mcp3911: fix device dependent mappings for conversion result registers
` [PATCH 2/3] dt-bindings: iio: adc: mcp3911: add reset-gpios
` [PATCH 3/3] iio: adc: mcp3911: add reset management

[PATCH v5 0/4] add support for winsen MHZ19B CO2 sensor
 2025-04-23 15:59 UTC  (7+ messages)
` [PATCH v5 1/4] dt-bindings: add winsen to the vendor prefixes
` [PATCH v5 2/4] dt-bindings: add device tree support for winsen MHZ19B CO2 sensor
` [PATCH v5 3/4] iio: chemical: add "
` [PATCH v5 4/4] MAINTAINERS: Add WINSEN MHZ19B

[PATCH] iio: pressure: bmp280: drop sensor_data array
 2025-04-22 22:38 UTC  (6+ messages)

[PATCH v2] iio: light: apds9306: Refactor threshold get/set functions to use helper
 2025-04-22 18:20 UTC  (2+ messages)

[PATCH] iio: magnetometer: ak8974: Add __nonstring annotations for unterminated strings
 2025-04-22 18:11 UTC  (5+ messages)

[PATCH v2 0/3] Fix and refactor output disable logic
 2025-04-22 16:25 UTC  (5+ messages)
` [PATCH v2 3/3] staging: iio: ad9832: Add minor improvements to ad9832_write_powerdown

[PATCH v2] Documentation: ABI: add oversampling frequency in sysfs-bus-iio
 2025-04-22 16:19 UTC  (3+ messages)

[PATCH 0/4] iio: introduce IIO_DECLARE_BUFFER_WITH_TS
 2025-04-22 16:15 UTC  (6+ messages)
` [PATCH 1/4] "

[PATCH v3] staging: iio: ad5933: Correct settling cycles encoding per datasheet
 2025-04-22 10:02 UTC  (2+ messages)

[PATCH v2 0/2] iio: dac: adi-axi-dac: fix for wrong bus read
 2025-04-22  8:41 UTC  (3+ messages)

[PATCH 0/5] staging: iio: adc: ad7816: Fix channel handling and refactor
 2025-04-22  6:44 UTC  (7+ messages)
` [PATCH 3/5] staging: iio: adc: ad7816: Introduce chip_info and use pointer matching
` [PATCH 4/5] staging: iio: adc: ad7816: Use chip_info for device capabilities
` [PATCH 5/5] staging: iio: adc: ad7816: Simplify channel validation using chip_info

[PATCH v3] iio: adc: ad7091r-base: Remove duplicate code on volatile reg check
 2025-04-22  1:52 UTC  (2+ messages)

[PATCH] iio: light: apds9306: Refactor threshold get/set functions to
 2025-04-22  0:41 UTC  (3+ messages)

[PATCH v6 00/11] iio: accel: adxl345: add interrupt based sensor events
 2025-04-21 22:11 UTC  (8+ messages)
` [PATCH v6 09/11] iio: accel: adxl345: add inactivity feature

[PATCH v7 00/11] iio: accel: adxl345: add interrupt based sensor events
 2025-04-21 22:06 UTC  (12+ messages)
` [PATCH v7 01/11] iio: accel: adxl345: introduce adxl345_push_event function
` [PATCH v7 02/11] iio: accel: adxl345: add single tap feature
` [PATCH v7 03/11] iio: accel: adxl345: add double "
` [PATCH v7 04/11] iio: accel: adxl345: set the tap suppress bit permanently
` [PATCH v7 05/11] iio: accel: adxl345: add freefall feature
` [PATCH v7 06/11] iio: accel: adxl345: extend sample frequency adjustments
` [PATCH v7 07/11] iio: accel: adxl345: add g-range configuration
` [PATCH v7 08/11] iio: accel: adxl345: add activity event feature
` [PATCH v7 09/11] iio: accel: adxl345: add inactivity feature
` [PATCH v7 10/11] iio: accel: adxl345: add coupling detection for activity/inactivity
` [PATCH v7 11/11] docs: iio: add documentation for adxl345 driver

[PATCH] dt-bindings: iio: adc: Add compatible for Dimensity 1200 MT6893
 2025-04-21 21:38 UTC  (2+ messages)


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox