messages from 2025-08-08 14:11:18 to 2025-08-13 10:18:48 UTC [more...]
[PATCH 0/3] Add LTC2495 support
2025-08-13 10:18 UTC (7+ messages)
` [PATCH 1/3] dt-bindings: iio: adc: ltc2497: add docs for LTC2495
` [PATCH 2/3] iio: adc: ltc2497: add support "
` [PATCH 3/3] iio: adc: ltc2497: add temperature sensor support
[PATCH v2] iio: light: ltr390: Add device powerdown functionality via devm api
2025-08-13 10:13 UTC (3+ messages)
[PATCH v3 0/8] iio: imu: new inv_icm45600 driver
2025-08-13 10:11 UTC (10+ messages)
` [PATCH v3 3/8] iio: imu: inv_icm45600: add buffer support in iio devices
` [PATCH v3 4/8] iio: imu: inv_icm45600: add IMU IIO devices
` [PATCH v3 7/8] iio: imu: inv_icm45600: add I3C driver for inv_icm45600 driver
[PATCH] iio: adc: bd79124: Add GPIOLIB dependency
2025-08-13 10:06 UTC (3+ messages)
[PATCH 0/4] Add support for ADAQ776x-1 ADC Family
2025-08-13 8:27 UTC (6+ messages)
` [PATCH 1/4] dt-bindings: iio: adc: ad7768-1: add new supported parts
` [PATCH 2/4] iio: adc: ad7768-1: introduce chip info for future multidevice support
` [PATCH 3/4] iio: adc: ad7768-1: use devm_regulator_get_enable_read_voltage
` [PATCH 4/4] iio: adc: ad7768-1: add support for ADAQ776x-1 ADC Family
[PATCH] iio: adc: ti-tsc2046: use us_to_ktime() where appropriate
2025-08-13 7:55 UTC
[PATCH v2] dt-bindings: iio: Replace bouncing Analog emails
2025-08-13 7:54 UTC (3+ messages)
[PATCH] mcp9600: Add support for mcp9601 and sensor config
2025-08-13 5:53 UTC (4+ messages)
[PATCH] iio: iio_format_list() should set stride=1 for IIO_VAL_CHAR
2025-08-12 20:44 UTC (3+ messages)
[PATCH v9 0/4] pressure: bmp280: Minor cleanup and interrupt support
2025-08-12 19:53 UTC (33+ messages)
` [bmp280 v1 0/6] Fixes and enhancements for the bmp280 driver
` [bmp280 v1 1/6] iio: pressure: bmp280: correct meas_time_us calculation
` [bmp280 v1 3/6] iio: pressure: bmp280: implement sampling_frequency for BMx280
` [bmp280 v1 4/6] iio: pressure: bmp280: enable filter settings "
` [bmp280 v1 5/6] iio: pressure: bmp280: remove code duplication
` [RFC PATCH v2 0/9] Fixes and enhancements for the bmp280 driver
` [RFC PATCH v2 1/9] iio: pressure: bmp280: correct meas_time_us calculation
` [RFC PATCH v2 2/9] iio: pressure: bmp280: implement adaptive wait for BMx280 devices
` [RFC PATCH v2 3/9] iio: pressure: bmp280: implement adaptive wait for BMP380 devices
` [RFC PATCH v2 4/9] iio: pressure: bmp280: refactoring
` [RFC PATCH v2 5/9] iio: pressure: bmp280: remove code duplication
` [RFC PATCH v2 6/9] iio: pressure: bmp280: enable filter settings for BMx280
` [RFC PATCH v2 7/9] iio: pressure: bmp280: implement sampling_frequency "
` [RFC PATCH v2 8/9] iio: pressure: bmp280: implement sampling_frequency calculation "
` [RFC PATCH v2 9/9] iio: pressure: bmp280: test longer autosuspend (WIP)
[PATCH v2 0/2] Keep imx93 ADC works even calibration failed
2025-08-12 16:16 UTC (8+ messages)
` [PATCH v2 1/2] iio: adc: imx93_adc: keep one style of the hex values
` [PATCH v2 2/2] iio: adc: imx93_adc: load calibrated values even calibration failed
[PATCH v4 0/6] iio: processed channel handling fixes + Intel Dollar Cove TI PMIC ADC driver
2025-08-12 16:00 UTC (14+ messages)
` [PATCH v4 1/6] iio: consumers: Fix handling of negative channel scale in iio_convert_raw_to_processed()
` [PATCH v4 2/6] iio: consumers: Fix offset handling "
` [PATCH v4 3/6] iio: consumers: Add an iio_multiply_value() helper function
` [PATCH v4 4/6] iio: Improve iio_read_channel_processed_scale() precision
` [PATCH v4 5/6] iio: test: Add kunit tests for iio_multiply_value()
` [PATCH v4 6/6] iio: adc: Add Intel Dollar Cove TI PMIC ADC driver
[PATCH] iio/adc/pac1934: fix channel disable configuration
2025-08-12 8:36 UTC (2+ messages)
[PATCH v3 0/4] iio: adc: add support for ADE9000 Energy Monitoring IC
2025-08-12 0:37 UTC (11+ messages)
` [PATCH v3 1/4] iio: add power and energy measurement modifiers
` [PATCH v3 2/4] dt-bindings: iio: adc: add ade9000
` [PATCH v3 3/4] iio: adc: add ade9000 support
` [PATCH v3 4/4] Documentation: ABI: iio: add sinc4+lp
[PATCH] iio: imu: inv_icm42600: change invalid data error to EBUSY
2025-08-11 20:36 UTC (5+ messages)
[PATCH v3 0/2] iio: magnetometer: add support for Infineon TLV493D 3D Magnetic Sensor
2025-08-11 20:32 UTC (9+ messages)
` [PATCH v3 1/2] iio: magnetometer: add support for Infineon TLV493D 3D Magentic sensor
[PATCH] iio: light: ltr390: Add remove callback with needed support in device registration
2025-08-11 20:25 UTC (15+ messages)
[PATCH] iio: adc: ad7380: fix missing max_conversion_rate_hz on adaq4381-4
2025-08-11 19:22 UTC (4+ messages)
[PATCH v4] iio: st_lsm6dsx: Replace scnprintf with sysfs_emit
2025-08-11 19:17 UTC (2+ messages)
[PATCH] iio: dac: ad5791: drop unused member of struct ad5791_state
2025-08-11 18:36 UTC (2+ messages)
[PATCH v3] iio: st_lsm6dsx: Replace scnprintf with sysfs_emit
2025-08-11 16:59 UTC (4+ messages)
[PATCH] iio: frequency: adf4350: Fix prescaler usage
2025-08-11 15:11 UTC (11+ messages)
[PATCH v2 0/8] iio: imu: new inv_icm45600 driver
2025-08-11 14:56 UTC (7+ messages)
` [PATCH v2 3/8] iio: imu: inv_icm45600: add buffer support in iio devices
` [PATCH v2 4/8] iio: imu: inv_icm45600: add IMU IIO devices
[PATCH v3 0/2] iio: adc: Add Intel Dollar Cove TI PMIC ADC driver
2025-08-11 14:50 UTC (8+ messages)
` [PATCH v3 1/2] iio: Improve iio_read_channel_processed_scale() precision
[PATCH v2 0/5] iio: imu: inv_icm42600: pm_runtime fixes + various changes
2025-08-11 14:24 UTC (13+ messages)
` [PATCH v2 1/5] iio: imu: inv_icm42600: Simplify pm_runtime setup
` [PATCH v2 2/5] iio: imu: inv_icm42600: Drop redundant pm_runtime reinitialization in resume
` [PATCH v2 3/5] iio: imu: inv_icm42600: Avoid configuring if already pm_runtime suspended
` [PATCH v2 4/5] iio: imu: inv_icm42600: Use devm_regulator_get_enable() for vdd regulator
` [PATCH v2 5/5] iio: imu: inv_icm42600: use guard() to release mutexes
[PATCH] iio: imu: bmi270: Match ACPI ID found on newer GPD firmware
2025-08-11 13:10 UTC (3+ messages)
[PATCH] dt-bindings: iio: Replace bouncing Analog emails
2025-08-11 11:34 UTC (7+ messages)
[PATCH RFT] iio: Fix core buffer demux failure to account for unwanted channels at tail
2025-08-11 9:54 UTC (7+ messages)
[PATCH] iio: imu: adis16475: remove extra line
2025-08-11 9:44 UTC (3+ messages)
[PATCH v4 00/11] Support ROHM BD79105 ADC
2025-08-11 8:52 UTC (12+ messages)
` [PATCH v4 01/11] iio: adc: ad7476: Simplify chip type detection
` [PATCH v4 02/11] iio: adc: ad7476: Simplify scale handling
` [PATCH v4 03/11] iio: adc: ad7476: Use mV for internal reference
` [PATCH v4 04/11] iio: adc: ad7476: Use correct channel for bit info
` [PATCH v4 05/11] iio: adc: ad7476: use *_cansleep GPIO APIs
` [PATCH v4 06/11] iio: adc: ad7476: Drop convstart chan_spec
` [PATCH v4 07/11] iio: adc: ad7476: Conditionally call convstart
` [PATCH v4 08/11] dt-bindings: iio: adc: ad7476: Drop redundant prop: true
` [PATCH v4 09/11] dt-bindings: iio: adc: ad7476: Add ROHM bd79105
` [PATCH v4 10/11] iio: adc: ad7476: Support ROHM BD79105
` [PATCH v4 11/11] MAINTAINERS: A driver for simple 1-channel SPI ADCs
[PATCH v3 00/10] Support ROHM BD79105 ADC
2025-08-11 8:05 UTC (14+ messages)
` [PATCH v3 05/10] iio: adc: ad7476: use *_cansleep GPIO APIs
` [PATCH v3 06/10] iio: adc: ad7476: Drop convstart chan_spec
` [PATCH v3 07/10] iio: adc: ad7476: Conditionally call convstart
` [PATCH v3 08/10] dt-bindings: iio: adc: ad7476: Add ROHM bd79105
` [PATCH v3 09/10] iio: adc: ad7476: Support ROHM BD79105
[PATCH v2 0/3] Add IIO backend support for AD7779
2025-08-11 6:46 UTC (6+ messages)
` [PATCH v2 3/3] iio: adc: update ad7779 to use IIO backend
[PATCH v2 0/2] iio: magnetometer: add support for Infineon TLV493D 3D Magnetic Sensor
2025-08-10 18:34 UTC (5+ messages)
` [PATCH v2 1/2] iio: magnetometer: add support for Infineon TLV493D 3D Magentic sensor
[PATCH v7 0/3] iio:light: add driver for veml6046x00 RGBIR color sensor
2025-08-10 18:30 UTC (2+ messages)
[PATCH v4 3/3] iio: imu: bmi270: add support for motion events
2025-08-10 18:25 UTC (11+ messages)
[PATCH v5 0/2] iio: rzg2l_adc: Cleanups for rzg2l_adc driver
2025-08-10 12:33 UTC (3+ messages)
` [PATCH v5 1/2] iio: adc: rzg2l: Cleanup suspend/resume path
` [PATCH v5 2/2] iio: adc: rzg2l_adc: Set driver data before enabling runtime PM
[PATCH v2] iio: pressure: bmp280: Use IS_ERR() in bmp280_common_probe()
2025-08-10 8:08 UTC (2+ messages)
[PATCH v2] iio: Remove error prints for devm_add_action_or_reset()
2025-08-09 20:00 UTC (3+ messages)
[PATCH v2 0/2] iio: adc: ad799x: reference voltage capability
2025-08-09 19:33 UTC (3+ messages)
[PATCH] MAINTAINERS: Update max30208 maintainership
2025-08-09 17:47 UTC (5+ messages)
[PATCH] MAINTAINERS: Update max30208 for bouncing maintainer
2025-08-08 18:35 UTC (3+ messages)
[PATCH v2] iio: adc: ad4170-4: Use ERR_PTR() with %pe to improve error logging
2025-08-08 14:43 UTC (8+ messages)
[PATCH v2 00/10] Support ROHM BD79105 ADC
2025-08-08 14:17 UTC (8+ messages)
` [PATCH v2 06/10] iio: adc: ad7476: Drop convstart chan_spec
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).