messages from 2025-08-13 22:58:47 to 2025-08-18 05:54:20 UTC [more...]
[PATCH v5 0/2] iio: rzg2l_adc: Cleanups for rzg2l_adc driver
2025-08-18 5:54 UTC (4+ messages)
` [PATCH v5 1/2] iio: adc: rzg2l: Cleanup suspend/resume path
[PATCH v5 0/5] iio: mcp9600: Features and improvements
2025-08-18 3:59 UTC (6+ messages)
` [PATCH v5 1/5] dt-bindings: iio: mcp9600: Add microchip,mcp9601 and add constraints
` [PATCH v5 2/5] iio: mcp9600: White space and fixed width cleanup
` [PATCH v5 3/5] iio: mcp9600: Recognize chip id for mcp9601
` [PATCH v5 4/5] iio: mcp9600: Add support for thermocouple-type
` [PATCH v5 5/5] iio: mcp9600: Add support for IIR filter
[PATCH v4 0/5] iio: mcp9600: Features and improvements
2025-08-18 3:50 UTC (6+ messages)
` [PATCH v4 1/5] dt-bindings: iio: mcp9600: Add microchip,mcp9601 and add constraints
` [PATCH v4 2/5] iio: mcp9600: White space and fixed width cleanup
` [PATCH v4 3/5] iio: mcp9600: Recognize chip id for mcp9601
` [PATCH v4 4/5] iio: mcp9600: Add support for thermocouple-type
` [PATCH v4 5/5] iio: mcp9600: Add support for IIR filter
[PATCH 0/5] iio: mcp9600: Features and improvements
2025-08-17 21:10 UTC (27+ messages)
` [PATCH 1/5] dt-bindings: iio: mcp9600: Add compatible for microchip,mcp9601
` [PATCH 2/5] iio: mcp9600: White space cleanup for tab alignment
` [PATCH 3/5] iio: mcp9600: Recognize chip id for mcp9601
` [PATCH 4/5] iio: mcp9600: Add support for thermocouple-type
` [PATCH 5/5] iio: mcp9600: Add support for IIR filter
[PATCH v9 0/4] pressure: bmp280: Minor cleanup and interrupt support
2025-08-17 17:44 UTC (36+ messages)
` [bmp280 v1 0/6] Fixes and enhancements for the bmp280 driver
` [bmp280 v1 3/6] iio: pressure: bmp280: implement sampling_frequency for BMx280
` [bmp280 v1 4/6] iio: pressure: bmp280: enable filter settings "
` [RFC PATCH v2 0/9] Fixes and enhancements for the bmp280 driver
` [RFC PATCH v2 1/9] iio: pressure: bmp280: correct meas_time_us calculation
` [RFC PATCH v2 2/9] iio: pressure: bmp280: implement adaptive wait for BMx280 devices
` [RFC PATCH v2 4/9] iio: pressure: bmp280: refactoring
` [RFC PATCH v2 6/9] iio: pressure: bmp280: enable filter settings for BMx280
` [RFC PATCH v2 7/9] iio: pressure: bmp280: implement sampling_frequency "
` [RFC PATCH v2 8/9] iio: pressure: bmp280: implement sampling_frequency calculation "
` [RFC PATCH v2 9/9] iio: pressure: bmp280: test longer autosuspend (WIP)
[PATCH v2 1/5] dt-bindings: iio: mcp9600: Add compatible for microchip,mcp9601
2025-08-17 17:13 UTC (15+ messages)
` [PATCH v2 5/5] iio: mcp9600: Add support for IIR filter
[PATCH] iio: adc: ad7768-1: Remove logically dead code
2025-08-17 16:25 UTC (3+ messages)
[PATCH v2] iio: imu: use min() to improve code
2025-08-17 14:30 UTC (3+ messages)
[PATCH 1/3] dt-bindings: iio: adc: ltc2497: add docs for LTC2495
2025-08-17 7:11 UTC (4+ messages)
[PATCH v4 0/5] iio: adc: add support for ADE9000 Energy Monitoring IC
2025-08-16 19:08 UTC (9+ messages)
` [PATCH v4 1/5] iio: add IIO_ALTCURRENT channel type
` [PATCH v4 2/5] iio: add power and energy measurement modifiers
` [PATCH v4 3/5] dt-bindings: iio: adc: add ade9000
` [PATCH v4 4/5] iio: adc: add ade9000 support
` [PATCH v4 5/5] Documentation: ABI: iio: add sinc4+lp
[PATCH 00/16] IIO: Enable runtime checks on buffers size and related
2025-08-16 15:00 UTC (36+ messages)
` [PATCH 02/16] iio: light: vcnl4035: Fix endianness vs data placement in buffer issue
` [PATCH 05/16] iio: light: vcnl4035: Use iio_push_to_buffers_with_ts() to allow runtime source buffer size check
` [PATCH 06/16] iio: light: acpi-als: Use a structure for layout of data to push to buffer
` [PATCH 07/16] iio: light: acpi-als: Use iio_push_to_buffers_with_ts() to allow runtime source size check
` [PATCH 08/16] iio: light: adjd_s311: Use iio_push_to_buffers_with_ts() to allow source size runtime check
` [PATCH 09/16] iio: light: isl29125: "
` [PATCH 10/16] iio: light: max44000: "
` [PATCH 11/16] iio: light: st_uvis25: "
` [PATCH 12/16] iio: light: tcs3414: "
` [PATCH 13/16] iio: light: tcs3472: "
` [PATCH 14/16] iio: light: vcnl4000: Use a structure to make buffer arrangement explicit
` [PATCH 15/16] iio: light: vl6180: Use iio_push_to_buffers_with_ts() to allow source size runtime check
` [PATCH 16/16] iio: light: Simple conversions to iio_push_to_buffers_with_ts()
[PATCH] iio: frequency: adf4350: Fix prescaler usage
2025-08-16 13:47 UTC (10+ messages)
[PATCH] iio/adc/pac1934: fix channel disable configuration
2025-08-16 13:43 UTC (2+ messages)
[PATCH] iio: dac: ad5791: drop unused member of struct ad5791_state
2025-08-16 13:42 UTC (3+ messages)
[PATCH v4 0/6] iio: processed channel handling fixes + Intel Dollar Cove TI PMIC ADC driver
2025-08-16 13:41 UTC (5+ messages)
` [PATCH v4 4/6] iio: Improve iio_read_channel_processed_scale() precision
` [PATCH v4 5/6] iio: test: Add kunit tests for iio_multiply_value()
[PATCH v4] iio: st_lsm6dsx: Replace scnprintf with sysfs_emit
2025-08-16 13:34 UTC (3+ messages)
[PATCH] iio: adc: ad7380: fix missing max_conversion_rate_hz on adaq4381-4
2025-08-16 13:33 UTC (5+ messages)
[PATCH v2 0/2] Keep imx93 ADC works even calibration failed
2025-08-16 13:28 UTC (2+ messages)
[PATCH] iio: iio_format_list() should set stride=1 for IIO_VAL_CHAR
2025-08-16 13:25 UTC (4+ messages)
[PATCH v2] dt-bindings: iio: Replace bouncing Analog emails
2025-08-16 13:24 UTC (2+ messages)
[PATCH 0/4] Add support for ADAQ776x-1 ADC Family
2025-08-16 13:16 UTC (14+ messages)
` [PATCH 1/4] dt-bindings: iio: adc: ad7768-1: add new supported parts
` [PATCH 2/4] iio: adc: ad7768-1: introduce chip info for future multidevice support
` [PATCH 3/4] iio: adc: ad7768-1: use devm_regulator_get_enable_read_voltage
` [PATCH 4/4] iio: adc: ad7768-1: add support for ADAQ776x-1 ADC Family
[PATCH] iio: adc: ti-tsc2046: use us_to_ktime() where appropriate
2025-08-16 13:08 UTC (3+ messages)
[PATCH v4 0/2] iio: magnetometer: add support for Infineon TLV493D 3D Magnetic Sensor
2025-08-16 13:04 UTC (4+ messages)
` [PATCH v4 1/2] iio: magnetometer: add support for Infineon TLV493D 3D Magentic sensor
` [PATCH v4 2/2] dt-bindings: iio: magnetometer: document Infineon TLV493D 3D Magnetic sensor
[PATCH v4] iio: light: ltr390: Add device powerdown functionality via devm api
2025-08-16 12:57 UTC (2+ messages)
[PATCH 1/6] iio: health: afe4403: Do not store dev pointer in device struct
2025-08-16 12:55 UTC (9+ messages)
` [PATCH 2/6] iio: health: afe4403: Use devm_regulator_get_enable() helper
` [PATCH 3/6] iio: health: afe4403: Use dev_err_probe() helper
` [PATCH 4/6] iio: health: afe4404: Do not store dev pointer in device struct
` [PATCH 5/6] iio: health: afe4404: Use devm_regulator_get_enable() helper
` [PATCH 6/6] iio: health: afe4404: Use dev_err_probe() helper
[PATCH 00/21] treewide: remove unneeded 'fast_io' parameter in regmap_config
2025-08-16 12:34 UTC (6+ messages)
` [PATCH 05/21] iio: "
` (subset) [PATCH 00/21] treewide: "
[PATCH 0/3] Support ROHM BD7910[0,1,2,3]
2025-08-16 12:32 UTC (15+ messages)
` [PATCH 1/3] dt-bindings: iio: adc: Add BD7910[0,1,2,3]
` [PATCH 2/3] iio: adc: adc128s052: Simplify matching chip_data
` [PATCH 3/3] iio: adc: adc128s052: Support ROHM BD7910[0,1,2,3]
[PATCH] iio: adc: bd79124: Add GPIOLIB dependency
2025-08-16 12:25 UTC (6+ messages)
[PATCH v4 00/11] Support ROHM BD79105 ADC
2025-08-16 12:22 UTC (6+ messages)
` [PATCH v4 08/11] dt-bindings: iio: adc: ad7476: Drop redundant prop: true
` [PATCH v4 09/11] dt-bindings: iio: adc: ad7476: Add ROHM bd79105
[PATCH v4 0/9] iio: imu: new inv_icm45600 driver
2025-08-16 12:17 UTC (18+ messages)
` [PATCH v4 1/9] dt-bindings: iio: imu: Add inv_icm45600
` [PATCH v4 2/9] iio: imu: inv_icm45600: add new inv_icm45600 driver
` [PATCH v4 3/9] iio: imu: inv_icm45600: add buffer support in iio devices
` [PATCH v4 4/9] iio: imu: inv_icm45600: add IMU IIO gyroscope device
` [PATCH v4 5/9] iio: imu: inv_icm45600: add IMU IIO accelerometer device
` [PATCH v4 6/9] iio: imu: inv_icm45600: add I2C driver for inv_icm45600 driver
` [PATCH v4 7/9] iio: imu: inv_icm45600: add SPI "
` [PATCH v4 8/9] iio: imu: inv_icm45600: add I3C "
` [PATCH v4 9/9] MAINTAINERS: add entry for inv_icm45600 6-axis imu sensor
[PATCH v2 0/8] iio: imu: new inv_icm45600 driver
2025-08-16 11:17 UTC (5+ messages)
` [PATCH v2 3/8] iio: imu: inv_icm45600: add buffer support in iio devices
[PATCH] iio: core: Cast info mask to 'unsigned long *' in bit-ops
2025-08-16 11:10 UTC (2+ messages)
[PATCH] docs: iio: bno055: Correct wording in driver documentation
2025-08-16 10:57 UTC (3+ messages)
[PATCH v4 0/3] Add LTC2495 support
2025-08-16 10:53 UTC (8+ messages)
` [PATCH v4 1/3] dt-bindings: iio: adc: ltc2497: add lltc,ltc2495 bindings
` [PATCH v4 2/3] iio: adc: ltc2497: add support for LTC2495
` [PATCH v4 3/3] iio: adc: ltc2497: reorder struct members to fix memory holes
[PATCH v3 0/4] Add LTC2495 support
2025-08-16 10:23 UTC (9+ messages)
` [PATCH v3 1/4] dt-bindings: iio: adc: ltc2497: add lltc,ltc2495 bindings
` [PATCH v3 2/4] iio: adc: ltc2497: add support for LTC2495
` [PATCH v3 3/4] iio: adc: ltc2497: add temperature sensor support
` [PATCH v3 4/4] iio: adc: ltc2497: reorder struct members to fix memory holes
[PATCH v3 0/5] iio: mcp9600: Features and improvements
2025-08-16 10:09 UTC (2+ messages)
[PATCH] iio: imu: use min() to improve code
2025-08-16 7:29 UTC (3+ messages)
[PATCH v2] iio: imu: bmi270: Match PNP ID found on newer GPD firmware
2025-08-15 10:43 UTC
[PATCH v3] iio: light: ltr390: Add device powerdown functionality via devm api
2025-08-14 3:49 UTC (5+ messages)
[PATCH v3 0/4] iio: adc: add support for ADE9000 Energy Monitoring IC
2025-08-13 23:24 UTC (3+ messages)
` [PATCH v3 2/4] dt-bindings: iio: adc: add ade9000
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).