messages from 2025-10-10 11:23:52 to 2025-10-15 14:40:23 UTC [more...]
[PATCH v3 0/2] iio: humditiy: hdc3020: fix units
2025-10-15 14:40 UTC (6+ messages)
` [PATCH v3 1/2] iio: humditiy: hdc3020: fix units for temperature and humidity measurement
` [PATCH v3 2/2] iio: humditiy: hdc3020: fix units for thresholds and hysteresis
[PATCH 0/4] Add support for the Renesas RZ/N1 ADC
2025-10-15 14:28 UTC (5+ messages)
` [PATCH 1/4] dt-bindings: iio: adc: Add "
` [PATCH 2/4] iio: adc: Add support for "
` [PATCH 3/4] ARM: dts: renesas: r9a06g032: Add the ADC device
` [PATCH 4/4] MAINTAINERS: Add the Renesas RZ/N1 ADC driver entry
[PATCH v4 1/1] spi: offload: Add offset parameter
2025-10-15 12:14 UTC (2+ messages)
[PATCH 0/6] spi: add multi-bus support
2025-10-15 12:03 UTC (13+ messages)
` [PATCH 1/6] dt-bindings: spi: Add spi-buses property
` [PATCH 2/6] spi: Support multi-bus controllers
` [PATCH 3/6] spi: add multi_bus_mode field to struct spi_transfer
` [PATCH 4/6] spi: axi-spi-engine: support SPI_MULTI_BUS_MODE_STRIPE
` [PATCH 5/6] dt-bindings: iio: adc: adi,ad7380: add spi-buses property
` [PATCH 6/6] iio: adc: ad7380: Add support for multiple SPI buses
[PATCH] iio: dac: ad5446: Add AD5542 to the spi id table
2025-10-15 8:08 UTC (3+ messages)
[PATCH v4 0/2] NXP SAR ADC IIO driver for s32g2/3 platforms
2025-10-15 7:17 UTC (4+ messages)
` [PATCH v4 2/2] iio: adc: Add the NXP SAR ADC support for the "
[PATCH] iio: test: fixed-point: new kunit test
2025-10-15 5:46 UTC (4+ messages)
[PATCH v13 1/2] dt-bindings: iio: adc: add max14001
2025-10-15 5:12 UTC (2+ messages)
` [PATCH v13 2/2] iio: adc: max14001: New driver
[PATCH v5 0/7] Add SPI offload support to AD4030
2025-10-14 22:22 UTC (8+ messages)
` [PATCH v5 1/7] dt-bindings: iio: adc: adi,ad4030: Reference spi-peripheral-props
` [PATCH v5 2/7] Docs: iio: ad4030: Add double PWM SPI offload doc
` [PATCH v5 3/7] dt-bindings: iio: adc: adi,ad4030: Add PWM
` [PATCH v5 4/7] iio: adc: ad4030: Use BIT macro to improve code readability
` [PATCH v5 5/7] iio: adc: ad4030: Add SPI offload support
` [PATCH v5 6/7] dt-bindings: iio: adc: adi,ad4030: Add ADAQ4216 and ADAQ4224
` [PATCH v5 7/7] iio: adc: ad4030: Add support for "
[PATCH v4 00/19] iio: accel: bma220 improvements
2025-10-14 16:52 UTC (42+ messages)
` [PATCH v4 01/19] iio: accel: bma220: remove incorrect kernel-doc marking
` [PATCH v4 02/19] iio: accel: bma220: relax constraints during probe()
` [PATCH v4 03/19] iio: accel: bma220: cleanup license string
` [PATCH v4 04/19] iio: accel: bma220: shorten spi->dev calls
` [PATCH v4 05/19] iio: accel: bma220: move bma220_power function
` [PATCH v4 06/19] iio: accel: bma220: cleanup includes
` [PATCH v4 07/19] iio: accel: bma220: split original driver
` [PATCH v4 08/19] iio: accel: bma220: add open firmware table
` [PATCH v4 09/19] iio: accel: bma220: turn power supplies on
` [PATCH v4 10/19] iio: accel: bma220: reset registers during init stage
` [PATCH v4 11/19] iio: accel: bma220: migrate to regmap API
` [PATCH v4 12/19] iio: accel: bma220: populate buffer ts in trigger handler
` [PATCH v4 13/19] iio: accel: bma220: use find_match_table fct
` [PATCH v4 14/19] iio: accel: bma220: add i2c module
` [PATCH v4 15/19] iio: accel: bma220: add i2c watchdog feature
` [PATCH v4 16/19] iio: accel: bma220: add interrupt trigger
` [PATCH v4 17/19] iio: accel: bma220: add LPF cut-off frequency mapping
` [PATCH v4 18/19] iio: accel: bma220: add debugfs reg access
` [PATCH v4 19/19] iio: accel: bma220: add maintainer
[PATCH 0/6] iio: accel: bma220: add events
2025-10-14 16:43 UTC (7+ messages)
` [PATCH 1/6] iio: accel: bma220: white space cleanup
` [PATCH 2/6] iio: accel: bma220: remove useless include
` [PATCH 3/6] iio: accel: bma220: add tap detection
` [PATCH 4/6] iio: accel: bma220: add low-g event detection
` [PATCH 5/6] iio: accel: bma220: add high-g "
` [PATCH 6/6] iio: accel: bma220: add any-motion detection
[PATCH v6 0/5] i3c: Add basic HDR mode support
2025-10-14 16:40 UTC (6+ messages)
` [PATCH v6 1/5] i3c: Add HDR API support
` [PATCH v6 2/5] i3c: master: svc: Replace bool rnw with union for HDR support
` [PATCH v6 3/5] i3c: master: svc: Add basic HDR mode support
` [PATCH v6 4/5] dt-bindings: trivial-devices: add MEMSIC 3-axis magnetometer
` [PATCH v6 5/5] iio: magnetometer: Add mmc5633 sensor
[PATCH v2 1/1] MAINTAINERS: Update Intel Quadrature Encoder Peripheral maintainer
2025-10-14 14:59 UTC
[PATCH v2] iio: adc: ti_am335x_adc: Limit step_avg to valid range for gcc complains
2025-10-14 9:12 UTC
[PATCH v4] iio: accel: fix ADXL355 startup race condition
2025-10-14 7:13 UTC (5+ messages)
[PATCH v5 0/5] i3c: Add basic HDR mode support
2025-10-13 19:54 UTC (7+ messages)
` [PATCH v5 5/5] iio: magnetometer: Add mmc5633 sensor
[PATCH v2] dt-bindings: iio: accel: adxl345: document second interrupt
2025-10-13 19:51 UTC (2+ messages)
[PATCH 0/7] Add support for AD4062 device family
2025-10-13 19:50 UTC (9+ messages)
` [PATCH 1/7] dt-bindings: iio: adc: Add adi,ad4062
` [PATCH 2/7] docs: iio: New docs for ad4062 driver
` [PATCH 3/7] iio: adc: Add support for ad4062
` [PATCH 4/7] docs: iio: ad4062: Add IIO Trigger support
` [PATCH 5/7] iio: adc: "
` [PATCH 6/7] docs: iio: ad4062: Add IIO Events support
` [PATCH 7/7] iio: adc: "
[PATCH v2 0/2] iio: pressure: add driver and bindings for adp810
2025-10-13 17:02 UTC (3+ messages)
` [PATCH v2 1/2] dt-bindings: iio: pressure: Add Aosong adp810
` [PATCH v2 2/2] iio: pressure: adp810: Add driver for adp810 sensor
[PATCH 0/2] iio: pressure: add driver and bindings for adp810
2025-10-13 16:06 UTC (10+ messages)
` [PATCH 1/2] dt-bindings: iio: pressure: Add Aosong adp810
` [PATCH 2/2] iio: pressure: adp810: Add driver for adp810 sensor
[PATCH v4 0/8] Add SPI offload support to AD4030
2025-10-13 8:58 UTC (17+ messages)
` [PATCH v4 1/8] pwm: Declare waveform stubs for when PWM is not reachable
` [PATCH v4 6/8] iio: adc: ad4030: Add SPI offload support
` [PATCH v4 7/8] dt-bindings: iio: adc: adi,ad4030: Add ADAQ4216 and ADAQ4224
` [PATCH v4 8/8] iio: adc: ad4030: Add support for "
[PATCH] counter: microchip-tcb-capture: Allow shared IRQ for multi-channel TCBs
2025-10-13 6:01 UTC (2+ messages)
[PATCH v3 0/2] iio: health: max30100: Add DT LED pulse-width support
2025-10-13 0:06 UTC (4+ messages)
` [PATCH v3 1/2] dt-bindings: iio: health: max30100: Add LED pulse-width property
` [PATCH v3 2/2] iio: health: max30100: Make LED pulse-width configurable via DT
[PATCH] iio: adc: ti-ads131e08: return correct error code
2025-10-12 19:18 UTC (3+ messages)
[PATCH] iio: adc: ti_am335x_adc: Limit step_avg to valid range for gcc complains
2025-10-12 19:16 UTC (2+ messages)
[PATCH v2] iio: adc: ad7124: fix temperature channel
2025-10-12 19:07 UTC (3+ messages)
[PATCH] iio: imu: bmi270: fix dev_err_probe error msg
2025-10-12 19:05 UTC (3+ messages)
[PATCH] iio:common:ssp_sensors: Fix an error handling path ssp_probe()
2025-10-12 19:02 UTC (3+ messages)
[PATCH] iio: adc: ad7280a: fix ad7280_store_balance_timer()
2025-10-12 18:59 UTC (3+ messages)
[PATCH RFC 0/6] Battery temperature ADC plumbing on Qualcomm platforms
2025-10-12 18:41 UTC (12+ messages)
` [PATCH RFC 1/6] iio: adc: qcom-spmi-adc5: Add battery thermal channels
` [PATCH RFC 2/6] dt-bindings: thermal: generic-adc: Document #io-channel-cells
` [PATCH RFC 3/6] thermal/drivers/generic-adc: Register as IIO device
` [PATCH RFC 4/6] thermal/drivers/generic-adc: Allow probe without TZ registration
` [PATCH RFC 5/6] arm64: dts: qcom: pm7250b: Define battery temperature ADC channels
` [PATCH RFC 6/6] arm64: dts: qcom: sm7225-fairphone-fp4: Add battery temperature node
[PATCH v3 0/6] iio: adc: ad4080: add support for AD4081 and AD4084
2025-10-12 18:11 UTC (5+ messages)
` [PATCH v3 1/6] iio: adc: ad4080: fix chip identification
[PATCH v5 0/6] iio: accel: bma400: Refactor GENINTR config and register macros
2025-10-12 18:06 UTC (7+ messages)
` [PATCH v5 1/6] iio: accel: bma400: Reorganize and rename register and field macros
` [PATCH v5 2/6] iio: accel: bma400: Use macros for generic event configuration values
` [PATCH v5 3/6] iio: accel: bma400: Use index-based register addressing and lookup
` [PATCH v5 4/6] iio: accel: bma400: Replace bit shifts with FIELD_PREP() and FIELD_GET()
` [PATCH v5 5/6] iio: accel: bma400: Rename activity_event_en() to generic_event_en()
` [PATCH v5 6/6] iio: accel: bma400: Add detail to comments in GEN INTR configuration
[PATCH v5 0/2] iio: imu: smi330: add bosch smi330 driver
2025-10-12 17:58 UTC (7+ messages)
` [PATCH v5 1/2] dt-bindings: iio: imu: smi330: Add binding
` AW: "
[PATCH] iio: adc: Fix pm runtime clean-up in sun4i_gpadc_probe
2025-10-12 17:52 UTC (3+ messages)
[PATCH v2 0/2] iio: health: max30100: Add DT pulse-width support
2025-10-12 17:45 UTC (15+ messages)
` [PATCH v2 1/2] dt-bindings: iio: max30100: Add pulse-width property
` [PATCH v2 2/2] iio: health: max30100: Add pulse-width configuration via DT
[PATCH v4 0/2] iio: temperature: Add support for NXP P3T175x temperature sensors
2025-10-12 17:15 UTC (7+ messages)
` [PATCH v4 1/2] dt-bindings: iio: temperature: Add NXP P3T175x support
` [EXT] Re: [PATCH v4 0/2] iio: temperature: Add support for NXP P3T175x temperature sensors
[PATCH 0/2] iio: health: max30100: Add DT pulse-width support
2025-10-12 16:52 UTC (6+ messages)
` [PATCH 1/2] dt-bindings: iio: max30100: Add pulse-width property
[PATCH v7 0/9] iio: imu: new inv_icm45600 driver
2025-10-12 16:42 UTC (2+ messages)
[PATCH v4 0/6] iio: accel: bma400: Refactor GENINTR config and register macros
2025-10-12 15:55 UTC (6+ messages)
` [PATCH v4 1/6] iio: accel: bma400: Reorganize and rename register and field macros
` [PATCH v4 4/6] iio: accel: bma400: Replace bit shifts with FIELD_PREP and FIELD_GET
[PATCH v3 0/3] iio: buffer: Fix DMABUF mapping in some systems
2025-10-12 15:46 UTC (2+ messages)
[PATCH v9] dt-bindings: iio: Add Infineon DPS310 sensor documentation
2025-10-12 15:44 UTC (2+ messages)
[PATCH v2 0/3] iio: buffer: Fix DMABUF mapping in some systems
2025-10-12 15:34 UTC (6+ messages)
[PATCH 0/2] Remove ad9832.h and ad9834.h header files in drivers/staging/iio/frequency
2025-10-12 14:17 UTC (3+ messages)
` [PATCH 1/2] staging: iio: ad9834: remove empty ad9834.h file
[PATCH v4 0/6] Add ADCs support for RZ/T2H and RZ/N2H
2025-10-12 14:16 UTC (2+ messages)
[PATCH v3 0/5] iio: accel: bma400: Refactor GENINTR config and register macros
2025-10-12 14:04 UTC (9+ messages)
` [PATCH v3 1/5] iio: accel: bma400: Reorganize and rename register and field macros
` [PATCH v3 2/5] iio: accel: bma400: Use macros for generic event configuration values
[PATCH 0/2] iio: imu: st_lsm6dsx: Decouple sensor ODR from FIFO batch data rate
2025-10-10 18:50 UTC (15+ messages)
` [PATCH 2/2] "
[PATCH] iio: adc: spear_adc: cleans up and sorts the existing includes
2025-10-10 17:16 UTC (2+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).