messages from 2025-11-15 14:16:30 to 2025-11-24 16:02:40 UTC [more...]
[PATCH v4 0/6] Add support for the LTM8054 voltage regulator
2025-11-24 16:02 UTC (14+ messages)
` [PATCH v4 1/6] regulator: dt-bindings: Add Linear Technology LTM8054 regulator
` [PATCH v4 2/6] iio: inkern: Use namespaced exports
` [PATCH v4 3/6] iio: add processed write API
` [PATCH v4 4/6] iio: test: Add kunit tests for iio_divide_by_value()
` [PATCH v4 5/6] regulator: Support the LTM8054 voltage regulator
` [PATCH v4 6/6] regulator: ltm8054: Support output current limit control
[RESEND PATCH v2 0/2] iio: frequency: adf4377: add clock provider support
2025-11-24 12:09 UTC (5+ messages)
` [RESEND PATCH v2 1/2] dt-bindings: iio: frequency: adf4377: add clk provider
` [RESEND PATCH v2 2/2] iio: frequency: adf4377: add clk provider support
[PATCH 0/2] iio: pressure: add Honeywell ABP2 driver
2025-11-24 11:48 UTC (5+ messages)
` [PATCH 1/2] dt-bindings: iio: pressure: add honeywell,abp2030pa
` [PATCH 2/2] iio: pressure: add Honeywell ABP2 driver
[PATCH v2 0/9] Add support for AD4062 device family
2025-11-24 10:40 UTC (15+ messages)
` [PATCH v2 1/9] dt-bindings: iio: adc: Add adi,ad4062
` [PATCH v2 2/9] docs: iio: New docs for ad4062 driver
` [PATCH v2 3/9] iio: adc: Add support for ad4062
` [PATCH v2 4/9] docs: iio: ad4062: Add IIO Trigger support
` [PATCH v2 5/9] iio: adc: "
` [PATCH v2 6/9] docs: iio: ad4062: Add IIO Events support
` [PATCH v2 7/9] iio: adc: "
` [PATCH v2 8/9] docs: iio: ad4062: Add GPIO Controller support
` [PATCH v2 9/9] iio: adc: "
[PATCH 0/7] Add support for AD4062 device family
2025-11-24 9:24 UTC (15+ messages)
` [PATCH 3/7] iio: adc: Add support for ad4062
` [PATCH 5/7] iio: adc: ad4062: Add IIO Trigger support
` [PATCH 7/7] iio: adc: ad4062: Add IIO Events support
[PATCH v8 0/2] NXP SAR ADC IIO driver for s32g2/3 platforms
2025-11-22 17:06 UTC (5+ messages)
` [PATCH v8 1/2] dt-bindings: iio: adc: Add the NXP SAR ADC "
` [PATCH v8 2/2] iio: adc: Add the NXP SAR ADC support for the "
[PATCH v4 0/2] iio: amplifiers: add support for ADL8113 Low Noise Amplifier
2025-11-22 16:52 UTC (5+ messages)
` [PATCH v4 1/2] dt-bindings: iio: amplifiers: add adl8113
` [PATCH v4 2/2] iio: amplifiers: adl8113: add driver support
[PATCH 0/2] iio: Add support for TI ADS1X18 ADCs
2025-11-22 16:14 UTC (20+ messages)
` [PATCH 1/2] dt-bindings: iio: adc: Add TI ADS1018/ADS1118
` [PATCH 2/2] iio: adc: Add ti-ads1x18 driver
[PATCH 0/9] st_lsm6dsx: add tap event detection
2025-11-21 14:57 UTC (15+ messages)
` [PATCH 8/9] iio: imu: st_lsm6dsx: add event configurability on a per axis basis
[PULL] IIO: New device support, features and cleanup for 6.19
2025-11-21 14:26 UTC (2+ messages)
[PATCH v2 0/2] iio: frequency: adf4377: add clock provider support
2025-11-21 9:50 UTC (3+ messages)
` [PATCH v2 1/2] dt-bindings: iio: frequency: adf4377: add clk provider
` [PATCH v2 2/2] iio: frequency: adf4377: add clk provider support
[PATCH v2 0/9] st_lsm6dsx: add tap event detection
2025-11-21 9:34 UTC (20+ messages)
` [PATCH v2 1/9] iio: imu: st_lsm6dsx: fix iio_chan_spec for sensors without "
` [PATCH v2 2/9] iio: imu: st_lsm6dsx: make event_settings more generic
` [PATCH v2 3/9] iio: imu: st_lsm6dsx: move wakeup event enable mask to event_src
` [PATCH v2 4/9] iio: imu: st_lsm6dsx: rework code to check for enabled events
` [PATCH v2 5/9] iio: imu: st_lsm6dsx: remove event_threshold field from hw struct
` [PATCH v2 6/9] iio: imu: st_lsm6dsx: make event management functions generic
` [PATCH v2 7/9] iio: imu: st_lsm6dsx: add event configurability on a per axis basis
` [PATCH v2 8/9] iio: imu: st_lsm6dsx: add event spec parameter to iio_chan_spec initializer
` [PATCH v2 9/9] iio: imu: st_lsm6dsx: add tap event detection
[PATCH 0/2] iio: frequency: adf4377: add clock provider support
2025-11-21 3:13 UTC (8+ messages)
` [PATCH 1/2] dt-bindings: frequency: adf4377: add clk provider
` [PATCH 2/2] iio: frequency: adf4377: add clk provider support
[PATCH v7 0/2] NXP SAR ADC IIO driver for s32g2/3 platforms
2025-11-19 19:47 UTC (4+ messages)
` [PATCH v7 1/2] dt-bindings: iio: adc: Add the NXP SAR ADC "
` [PATCH v7 2/2] iio: adc: Add the NXP SAR ADC support for the "
[PATCH v2 0/3] iio: adc: Add AD4134 minimum I/O support
2025-11-19 18:38 UTC (6+ messages)
` [PATCH v2 1/3] dt-bindings: iio: adc: Add AD4134
` [PATCH v2 2/3] iio: adc: Initial support for AD4134
` [PATCH v2 3/3] Docs: iio: Add AD4134
[PATCH v6 0/2] NXP SAR ADC IIO driver for s32g2/3 platforms
2025-11-19 16:14 UTC (6+ messages)
` [PATCH v6 1/2] dt-bindings: iio: adc: Add the NXP SAR ADC "
` [PATCH v6 2/2] iio: adc: Add the NXP SAR ADC support for the "
[PATCH 0/2] Adding support for Microchip PAC1711
2025-11-19 15:58 UTC (5+ messages)
` [PATCH 2/2] iio: adc: adding support for PAC1711
[PATCH] staging: iio: adt7316: replace sprintf() with sysfs_emit()
2025-11-19 14:57 UTC (6+ messages)
[PATCH v6 00/26] Non-const bitfield helpers
2025-11-19 14:50 UTC (3+ messages)
[PATCH v2 0/6] spi: add multi-bus support
2025-11-19 14:45 UTC (10+ messages)
` [PATCH v2 1/6] spi: dt-bindings: Add spi-data-buses property
` [PATCH v2 4/6] spi: axi-spi-engine: support SPI_MULTI_BUS_MODE_STRIPE
` [PATCH v2 5/6] dt-bindings: iio: adc: adi,ad7380: add spi-buses property
[PATCH v3 0/3] iio: amplifiers: add support for ADL8113 Low Noise Amplifier
2025-11-19 9:09 UTC (11+ messages)
` [PATCH v3 1/3] dt-bindings: iio: amplifiers: add adl8113
` [PATCH v3 2/3] iio: amplifiers: adl8113: add driver support
` [PATCH v3 3/3] Documentation: ABI: adl8113: add documentation
[PATCH v3 0/5] Add support for the LTM8054 voltage regulator
2025-11-18 18:21 UTC (6+ messages)
` [PATCH v3 2/5] iio: add processed write API
[PATCH v4 0/2] iio: adc: Add support for TI ADS131M0x ADCs
2025-11-18 15:14 UTC (4+ messages)
` [PATCH v4 1/2] bindings: iio: adc: Add bindings "
` [PATCH v4 2/2] iio: adc: Add TI ADS131M0x ADC driver
[PATCH v5 0/2] NXP SAR ADC IIO driver for s32g2/3 platforms
2025-11-18 14:22 UTC (11+ messages)
` [PATCH v5 2/2] iio: adc: Add the NXP SAR ADC support for the "
[PATCH v2 0/2] iio: adc: ti-ads1120: Add driver and dt-binding
2025-11-18 14:04 UTC (7+ messages)
` [PATCH v2 1/2] dt-bindings: iio: adc: Add TI ADS1120 binding
` [PATCH v2 2/2] iio: adc: Add support for TI ADS1120
[PATCH] counter: interrupt-cnt: Drop IRQF_NO_THREAD flag
2025-11-18 10:30 UTC (6+ messages)
[PATCH 0/2] iio: frequency: adf4377: add clock provider support
2025-11-17 19:19 UTC (3+ messages)
` [PATCH 1/2] dt-bindings: frequency: adf4377: add clk provider
[PATCH] iio: dac: ad5686: add AD5695R to ad5686_chip_info_tbl
2025-11-17 16:23 UTC (3+ messages)
[PATCH v3 0/2] iio: adc: Add support for TI ADS131M0x ADCs
2025-11-17 12:18 UTC (5+ messages)
` [PATCH v3 2/2] iio: adc: Add TI ADS131M0x ADC driver
[PATCH 0/3] ADF41513/ADF41510 PLL frequency synthesizers
2025-11-17 8:37 UTC (7+ messages)
` [PATCH 1/3] iio: frequency: adf41513: driver implementation
[PATCH] iio: pressure: Arrange Makefile alphabetically
2025-11-16 15:22 UTC (3+ messages)
[Bug 220772] New: NULL pointer dereference in bmc150-accel-core
2025-11-16 12:05 UTC (5+ messages)
` [Bug 220772] "
[PATCH 0/2] arm64: dts: imx8qxp-mek: Add i2c1 sensors
2025-11-16 9:49 UTC (3+ messages)
` [PATCH 2/2] arm64: dts: imx8qxp-mek: Add sensors under i2c1 bus
[PATCH v1 1/1] iio: imu: inv_icm42600: Convert to uXX and sXX integer types
2025-11-15 18:50 UTC (4+ messages)
[PATCH] iio: accel: bmc150: Do not configure IRQ registers if no IRQ connected
2025-11-15 18:23 UTC (7+ messages)
[PATCH v2 0/3] iio: amplifiers: add support for ADL8113 Low Noise Amplifier
2025-11-15 18:12 UTC (5+ messages)
` [PATCH v2 2/3] iio: amplifiers: adl8113: add driver support
[PATCH v4 0/3] iio: mpl3115: support for events
2025-11-15 18:07 UTC (2+ messages)
[PATCH] iio: buffer: use dma_buf_unmap_attachment_unlocked() helper
2025-11-15 17:31 UTC (3+ messages)
[PATCH v1 0/3] iio: core: fix error path in iio_device_alloc()
2025-11-15 17:29 UTC (3+ messages)
[PATCH] iio: adc: ad7280a: handle spi_setup() errors in probe()
2025-11-15 17:14 UTC (3+ messages)
[PATCH v2 1/2] dt-bindings: iio: accel: adxl380: add new supported parts
2025-11-15 17:12 UTC (3+ messages)
` [PATCH v2 2/2] iio: accel: adxl380: add support for ADXL318 and ADXL319
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox