messages from 2026-05-27 14:35:29 to 2026-05-30 03:20:17 UTC [more...]
[PATCH V9 00/11] Add Invensense ICM42607
2026-05-30 3:17 UTC (2+ messages)
` [PATCH V9 01/11] dt-bindings: iio: imu: icm42600: Add mount-matrix to icm42600
[PATCH v3 0/3] iio: imu: inv_mpu6050: runtime pm fixes
2026-05-29 19:35 UTC (6+ messages)
` [PATCH v3 1/3] iio: imu: inv_mpu6050: fix unbalanced regulator_disable calls, when probe fails
[PATCH v2] iio: adc: ti-ads1015: use devm helpers to fix probe error paths
2026-05-29 18:37 UTC
[PATCH] iio: adc: ti-ads1015: use devm_pm_runtime_enable() to fix probe error path
2026-05-29 17:34 UTC (3+ messages)
[PATCH v2 0/4] iio: adc: Add support for LTC2378 and similar ADCs
2026-05-29 17:31 UTC (11+ messages)
` [PATCH v2 1/4] dt-bindings: iio: adc: Add ltc2378
` [PATCH v2 2/4] iio: adc: ltc2378: Add support for LTC2378-20 and similar ADCs
` [PATCH v2 3/4] iio: adc: ltc2378: Enable high-speed data capture
` [PATCH v2 4/4] iio: adc: ltc2378: Enable triggered buffer "
[PATCH 0/4] iio: PM-enable leak on probe error path (goto-variant drivers)
2026-05-29 17:23 UTC (10+ messages)
` [PATCH 1/4] iio: light: pa12203001: use devm_pm_runtime_enable() to fix probe error path
` [PATCH 2/4] iio: light: us5182d: "
` [PATCH 3/4] iio: light: apds9960: "
` [PATCH 4/4] iio: accel: mma8452: "
[PATCH v2 0/2] iio: adc: ad4080: add support for AD4884
2026-05-29 17:15 UTC (4+ messages)
` [PATCH v2 1/2] dt-bindings: iio: adc: ad4080: add AD4884 support
` [PATCH v2 2/2] iio: adc: ad4080: add support for AD4884
[PATCH RFC v3 0/6] iio: add Open Sensor Fusion OSF0 UART driver
2026-05-29 17:14 UTC (9+ messages)
` [PATCH RFC v3 1/6] dt-bindings: iio: add OSF GREEN sensor aggregation device
` [PATCH RFC v3 2/6] Documentation: iio: add Open Sensor Fusion protocol v0 reference
` [PATCH RFC v3 3/6] iio: osf: add protocol v0 decoding
` [PATCH RFC v3 4/6] iio: osf: add stream parser
` [PATCH RFC v3 5/6] iio: osf: add UART serdev transport
` [PATCH RFC v3 6/6] iio: osf: register IIO devices from capabilities
[PATCH v5] iio: chemical: scd30: Replace manual locking with RAII locking
2026-05-29 13:20 UTC (5+ messages)
[PATCH v2 0/6] mfd: lm3533: convert to OF bindings, improve support
2026-05-29 13:10 UTC (24+ messages)
` [PATCH v2 1/6] dt-bindings: leds: Document TI LM3533 LED controller
` [PATCH v2 2/6] mfd: lm3533: Convert to use OF bindings
` [PATCH v2 3/6] mfd: lm3533: Add support for VIN power supply
` [PATCH v2 4/6] mfd: lm3533: Set DMA mask
` [PATCH v2 5/6] video: backlight: lm3533_bl: Set initial mapping mode from DT
` [PATCH v2 6/6] video: leds: backlight: lm3533: Support getting LED sources "
[PATCH RFC v2 0/7] iio: add Open Sensor Fusion UART driver
2026-05-29 13:07 UTC (20+ messages)
` [PATCH RFC v2 2/7] Documentation: iio: add Open Sensor Fusion protocol v0 reference
` [PATCH RFC v2 3/7] iio: osf: add protocol v0 decoding
` [PATCH RFC v2 4/7] iio: osf: add stream parser
` [PATCH RFC v2 5/7] iio: osf: add UART serdev transport
` [PATCH RFC v2 6/7] iio: osf: register IIO devices from capabilities
` [PATCH RFC v2 7/7] MAINTAINERS: add Open Sensor Fusion IIO driver
[PATCH v13 0/6] iio: adc: ad4691: add driver for AD4691 multichannel SAR ADC family
2026-05-29 10:06 UTC (6+ messages)
` [PATCH v13 2/6] iio: adc: ad4691: add initial driver for AD4691 family
` [PATCH v13 5/6] iio: adc: ad4691: add oversampling support
[PATCH 0/4] iio: fix PM-enable leak on probe error path across 4 drivers
2026-05-29 11:11 UTC (6+ messages)
` [PATCH 1/4] iio: light: isl29028: use devm_pm_runtime_enable() to fix probe error path
` [PATCH 2/4] iio: light: tsl2583: "
` [PATCH 3/4] iio: temperature: mlx90614: "
` [PATCH 4/4] iio: accel: bmi088-accel: "
[PATCH v4] light: tsl2591: simplify tsl2591_persist functions via lookup table
2026-05-29 10:39 UTC (2+ messages)
[PATCH v14 0/6] iio: adc: ad4691: add driver for AD4691 multichannel SAR ADC family
2026-05-29 10:15 UTC (7+ messages)
` [PATCH v14 1/6] dt-bindings: iio: adc: add AD4691 family
` [PATCH v14 2/6] iio: adc: ad4691: add initial driver for "
` [PATCH v14 3/6] iio: adc: ad4691: add triggered buffer support
` [PATCH v14 4/6] iio: adc: ad4691: add SPI offload support
` [PATCH v14 5/6] iio: adc: ad4691: add oversampling support
` [PATCH v14 6/6] docs: iio: adc: ad4691: add driver documentation
[PATCH v3] counter: ti-eqep: use devm for runtime PM to fix probe error path
2026-05-29 9:58 UTC
[PATCH v2] counter: ti-eqep: balance pm_runtime on devm_clk_get_enabled() failure
2026-05-29 9:57 UTC (3+ messages)
[PATCH v3] iio: adc: qcom-spmi-iadc: balance enable_irq_wake() on driver unbind
2026-05-29 9:56 UTC
[PATCH v3 0/5] iio: adc: add AMD/Xilinx Versal SysMon driver
2026-05-29 9:03 UTC (18+ messages)
` [PATCH v3 1/5] dt-bindings: iio: adc: add xlnx,versal-sysmon binding
` [PATCH v3 2/5] iio: adc: add Versal SysMon driver
` [PATCH v3 3/5] iio: adc: versal-sysmon: add I2C driver
` [PATCH v3 4/5] iio: adc: versal-sysmon: add threshold event support
` [PATCH v3 5/5] iio: adc: versal-sysmon: add oversampling support
[PATCH v5 0/2] iio: adc: ad_sigma_delta: fix CS assertion and registerless device handling
2026-05-29 8:58 UTC (8+ messages)
` [PATCH v5 1/2] iio: adc: ad_sigma_delta: fix CS held asserted and state leaks
` [PATCH v5 2/2] iio: adc: ad_sigma_delta: fix clear_pending_event for registerless devices
[PATCH] iio: pressure: rohm-bm1390: notify trigger on all error paths
2026-05-29 8:21 UTC (7+ messages)
` [PATCH v2] "
[RFC PATCH v3 0/4] iio: position: add Rust driver for ams AS5600
2026-05-29 5:37 UTC (10+ messages)
` [RFC PATCH v3 1/4] i2c: rust: implement kernel::io::Io trait for I2cClient
` [RFC PATCH v3 2/4] rust: add minimal IIO subsystem abstractions
` [RFC PATCH v3 3/4] iio: position: add Rust driver for ams AS5600
` [RFC PATCH v3 4/4] iio: position: as5600: add Kconfig and Makefile entries
[PATCH 1/1] counter: intel-qep: Use devm_mutex_init()
2026-05-29 2:34 UTC (2+ messages)
[PATCH v2] counter: ftm-quaddec: use devm_mutex_init()
2026-05-29 2:08 UTC (6+ messages)
[PATCH RESEND v8 00/10] SPMI: Implement sub-devices and migrate drivers
2026-05-29 1:43 UTC (4+ messages)
[PATCH 1/4] iio: adc: add ti-ads1110
2026-05-28 19:10 UTC (10+ messages)
` [PATCH 2/4] add ti,ads1110.yaml
` [PATCH 3/4] update adc Kconfig with ads1110
` [PATCH 4/4] update adc MakeFile "
[PATCH v2] iio: light: al3010: read both ALS ADC registers again
2026-05-26 18:14 UTC (4+ messages)
` [PATCH v2] iio: light: al3320a: "
[PATCH 0/3] Subject: [PATCH 0/3] iio: adc: Add Axiado SARADC driver
2026-05-28 16:58 UTC (10+ messages)
` [PATCH 1/3] dt-bindings: iio: adc: add Axiado AX3000/AX3005 SARADC
` [PATCH 2/3] iio: adc: add Axiado SARADC driver
` [PATCH 3/3] MAINTAINERS: add Axiado SARADC driver entry
[PATCH v10 00/11] iio: adc: Add support for AVIA HX710B ADC
2026-05-28 14:09 UTC (13+ messages)
` [PATCH v10 02/11] dt-bindings: iio: adc: hx711: add VSUP supply property
` [PATCH v10 04/11] dt-bindings: iio: adc: hx711: add HX710B support
` [PATCH v10 11/11] iio: adc: hx711: add support for HX710B
[RFC PATCH v1 0/4] iio: add Sensirion SLF3x liquid flow sensor support
2026-05-28 13:56 UTC (24+ messages)
` [RFC PATCH v1 1/4] iio: types: add IIO_VOLUMEFLOW channel type
` [RFC PATCH v1 3/4] iio: flow: add Sensirion SLF3x liquid flow sensor driver
` [RFC PATCH v1 4/4] MAINTAINERS: add entry for Sensirion SLF3x "
` [PATCH v2 0/3] iio: flow: Sensirion SLF3S liquid flow sensor
` [PATCH v2 1/3] iio: types: add IIO_VOLUMEFLOW channel type
` [PATCH v2 2/3] dt-bindings: iio: flow: add Sensirion SLF3S liquid flow sensor
` [PATCH v2 3/3] iio: flow: add Sensirion SLF3S liquid flow sensor driver
[PATCH] iio: pressure: cros_ec_baro: simplify timestamp channel definition
2026-05-28 13:09 UTC (3+ messages)
[PATCH v2 0/5] iio: adc: add AMD/Xilinx Versal SysMon driver
2026-05-28 12:02 UTC (9+ messages)
` [PATCH v2 2/5] iio: adc: add "
[PATCH v1] iio: Use named initializers for platform_device_id arrays
2026-05-28 11:58 UTC (2+ messages)
[PATCH v2] iio: dac: mcp47feb02: refactor MCP47FEB02 I2C driver into two modules
2026-05-28 11:51 UTC (2+ messages)
[PATCH v4 0/8] iio: light: opt3001: driver cleanup
2026-05-28 7:10 UTC (8+ messages)
` [PATCH v4 1/8] iio: light: opt3001: move device registration to end of probe()
` [PATCH v4 3/8] iio: light: opt3001: ensure correct parenthesis alignment
` [PATCH v4 7/8] iio: light: opt3001: switch driver to managed resources
[PATCH v4 0/2] iio: light: add support for Broadcom APDS9999
2026-05-28 7:10 UTC (4+ messages)
` [PATCH v4 2/2] iio: light: add support for APDS9999 sensor
[PATCH v3] iio: accel: bmc150: use guard(mutex) for mutex handling
2026-05-27 17:15 UTC (3+ messages)
[PATCH v2] counter: interrupt-cnt: use devm_mutex_init()
2026-05-27 16:55 UTC (3+ messages)
[PATCH v4 0/9] iio: temperature: ltc2983: Add support for ADT7604
2026-05-27 16:51 UTC (19+ messages)
` [PATCH v4 1/9] iio: temperature: ltc2983: Fix n_wires default bypassing rotation check
` [PATCH v4 2/9] iio: temperature: ltc2983: Fix reinit_completion() called after conversion start
` [PATCH v4 3/9] iio: temperature: ltc2983: Fix macro parenthesization and rename
` [PATCH v4 4/9] iio: temperature: ltc2983: Use local device pointer consistently
` [PATCH v4 5/9] iio: temperature: ltc2983: Fix inconsistent channel wording in messages
` [PATCH v4 6/9] iio: temperature: ltc2983: Use fwnode_property_present() for optional properties
` [PATCH v4 7/9] iio: core: Add IIO_COVERAGE channel type
` [PATCH v4 8/9] dt-bindings: iio: temperature: Add ADT7604 support to adi,ltc2983
[PATCH v4 9/9] iio: temperature: ltc2983: Add support for ADT7604
2026-05-27 16:49 UTC (3+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox