messages from 2026-06-17 10:21:59 to 2026-06-20 17:49:06 UTC [more...]
[PATCH v2 0/5] Using dev_err_probe as it simplifies error handling and ensures consistent error reporting
2026-06-20 17:40 UTC (6+ messages)
` [PATCH v2 1/5] iio: adc: ti-adc081c: use dev_err_probe for probe time error
` [PATCH v2 2/5] iio: adc: ti-adc084s021: "
` [PATCH v2 3/5] iio: adc: ti-adc108s102: log buffer setup failure in probe
` [PATCH v2 4/5] iio: adc: ti-adc161s626: "
` [PATCH v2 5/5] iio: adc: ti-adc0832: "
[PATCH] iio: adc: ti-adc*: use dev_err_probe for probe time errors
2026-06-20 17:39 UTC (12+ messages)
` [PATCH 0/5] use dev_err_probe for probe time error
` [PATCH 1/5] iio: adc: ti-adc081c: "
` [PATCH 2/5] iio: adc: ti-adc084s021: "
` [PATCH 3/5] iio: adc: ti-adc108s102: log buffer setup failure in probe
` [PATCH 4/5] iio: adc: ti-adc161s626: "
` [PATCH 5/5] iio: adc: ti-adc0832: "
[PATCH v3 00/12] New features for the AD5686 IIO driver
2026-06-20 16:33 UTC (8+ messages)
` [PATCH v3 07/12] iio: dac: ad5686: add ldac gpio
` [PATCH v3 09/12] iio: dac: ad5686: implement new sync() op for the spi bus
` [PATCH v3 12/12] iio: dac: ad5686: add gain control support
[PATCH RFC 0/3] dt-bindings: iio: adc: Add reference, excitation and burn-out properties
2026-06-20 15:57 UTC (16+ messages)
` [PATCH RFC 1/3] dt-bindings: iio: adc: Add reference-source property
` [PATCH RFC 2/3] dt-bindings: iio: adc: Add excitation current sources properties
` [PATCH RFC 3/3] dt-bindings: iio: adc: Add burn-out current properties
[RFC PATCH 0/3] Add Sensirion STS30 temperature sensor driver
2026-06-20 15:15 UTC (7+ messages)
` [RFC PATCH 1/3] dt-bindings: iio: temperature: Add STS30 devicetree bindings
` [RFC PATCH 2/3] iio: temperature: Add STS30 temperature sensor driver
` [RFC PATCH 3/3] MAINTAINERS: Add entry for Sensirion STS30 driver
[PATCH v4] iio: accel: stk8ba50: Update includes to match IWYU
2026-06-20 6:55 UTC (2+ messages)
[PATCH v2] iio: ti-ads7138: Disable STATS_EN bit while reading conversion results
2026-06-20 6:36 UTC (3+ messages)
[PATCH v3 0/7] gpio: realtek: Add support for Realtek DHC RTD1625
2026-06-19 21:08 UTC (12+ messages)
` [PATCH v3 2/7] gpio: regmap: add gpio_regmap_get_gpiochip() accessor
[PATCH v1 00/13] iio: Use named initializers for device_id structures
2026-06-19 20:19 UTC (15+ messages)
` [PATCH v1 01/13] iio: Initialize i2c_device_id arrays using member names (part 2)
` [PATCH v1 02/13] iio: adc: ti-tsc2046: Simplify device abstraction
` [PATCH v1 03/13] iio: adc: ti-tsc2046: Drop unused member from private data
` [PATCH v1 04/13] iio: adc: max1241: Simplify device abstraction
` [PATCH v1 05/13] iio: dac: max5522: "
` [PATCH v1 06/13] iio: frequency: ad9523: Simplify driver a bit
` [PATCH v1 07/13] iio: imu: adis16550: Simplify device abstraction
` [PATCH v1 08/13] iio: magnetometer: hmc5843: "
` [PATCH v1 09/13] iio: accel: bmc150: Explicitly set spi .driver_data
` [PATCH v1 10/13] iio: Drop unused assignment of spi_device_id driver data
` [PATCH v1 11/13] iio: Initialize spi_device_id arrays using member names
` [PATCH v1 12/13] staging: iio: Drop unused assignment of spi_device_id driver data
` [PATCH v1 13/13] staging: iio: Initialize spi_device_id arrays using member names
[PATCH RFC 0/3] dmaengine: Support address bus widths of 32 bytes and above
2026-06-19 19:02 UTC (12+ messages)
` [PATCH RFC 1/3] "
` [PATCH RFC 2/3] dmaengine: dma-axi-dmac: Switch to bitmap-based address width masks
[PATCH v3 0/2] iio: dac: Add support for AD5529R DAC
2026-06-19 15:54 UTC (12+ messages)
` [PATCH v3 1/2] dt-bindings: iio: dac: Add AD5529R
[PATCH 5.15/6.12] iio: light: bh1780: fix PM runtime leak on error path
2026-06-19 14:34 UTC
[PATCH v3 0/5] iio: adc: Add support for LTC2378 and similar ADCs
2026-06-19 14:27 UTC (23+ messages)
` [PATCH v3 1/5] dt-bindings: iio: adc: Add ltc2378
` [PATCH v3 2/5] iio: adc: ltc2378: Add support for LTC2378-20 and similar ADCs
` [RFC PATCH v3 3/5] iio: buffer: Extend DMAengine buffer interfaces to take extra sysfs attributes
` [PATCH v3 4/5] iio: adc: ltc2378: Enable high-speed data capture
` [PATCH v3 5/5] iio: adc: ltc2378: Enable triggered buffer "
[PATCH V11 0/9] Add Invensense ICM42607
2026-06-19 13:54 UTC (3+ messages)
` [PATCH V11 4/9] iio: imu: inv_icm42607: Add I2C and SPI For icm42607
iio: accel: dmard09: in_accel_scale always returns -EINVAL
2026-06-19 12:10 UTC (5+ messages)
[PATCH 1/2] dt-bindings: misc: convert lis302.txt to YAML
2026-06-19 11:56 UTC (2+ messages)
` [PATCH 2/2] dt-bindings: iio: st-sensors: drop lis302dl-spi from deprecated list
[PATCH v3 0/3] iio: magnetometer: add driver for QST QMC5883L Sensor
2026-06-19 10:45 UTC (4+ messages)
` [PATCH v3 1/3] dt-bindings: add entry for qstcorp
` [PATCH v3 2/3] dt-bindings: iio: magnetometer: add QST QMC5883L Sensor
` [PATCH v3 3/3] iio: magnetometer: add driver for "
[PATCH v6 00/16] AD9910 Direct Digital Synthesizer
2026-06-19 9:20 UTC (25+ messages)
` [PATCH v6 01/16] iio: ABI: add attributes for altcurrent channels
` [PATCH v6 02/16] iio: ABI: scale and offset for frequency/phase channels
` [PATCH v6 03/16] iio: ABI: add parent entry for iio channels
` [PATCH v6 04/16] iio: add IIO_FREQUENCY channel type
` [PATCH v6 05/16] iio: core: support 64-bit register through debugfs
` [PATCH v6 06/16] iio: core: create local __iio_chan_prefix_emit() for reuse
` [PATCH v6 07/16] iio: core: add hierarchical channel relationships
` [PATCH v6 08/16] dt-bindings: iio: frequency: add ad9910
` [PATCH v6 09/16] iio: frequency: ad9910: initial driver implementation
` [PATCH v6 10/16] iio: frequency: ad9910: add basic parallel port support
` [PATCH v6 11/16] iio: frequency: ad9910: add digital ramp generator support
` [PATCH v6 12/16] iio: frequency: ad9910: add RAM mode support
` [PATCH v6 13/16] iio: frequency: ad9910: add output shift keying support
` [PATCH v6 14/16] iio: frequency: ad9910: show channel priority in debugfs
` [PATCH v6 15/16] iio: ABI: add docs for ad9910 sysfs entries
` [PATCH v6 16/16] docs: iio: add documentation for ad9910 driver
[PATCH v3] iio: accel: stk8ba50: Update includes to match IWYU
2026-06-19 9:14 UTC (3+ messages)
[PATCH] iio: light: tsl2591: replace persist switch statements with lookup table
2026-06-19 9:12 UTC (4+ messages)
[PATCH] ti-ads7138: Disable STATS_EN bit while reading conversion results
2026-06-19 8:20 UTC (2+ messages)
[PATCH v2 0/2] iio: magnetometer: add support for Melexis MLX90393
2026-06-19 6:40 UTC (10+ messages)
` [PATCH v2 1/2] dt-bindings: iio: magnetometer: add "
` [PATCH v2 2/2] iio: magnetometer: add support for "
[PATCH v2 0/2] iio: chemical: sps30, scd30
2026-06-18 21:27 UTC (9+ messages)
` [PATCH v2 1/2] iio: chemical: sps30: update email
` [PATCH v2 2/2] iio: chemical: scd30: "
[PATCH v6 0/2] add mcf54415 DAC driver
2026-06-18 21:04 UTC (3+ messages)
` [PATCH v6 1/2] iio: dac: add mcf54415 DAC
` [PATCH v6 2/2] m68k: defconfig: update stmark2 defconfig
[PATCH v2 0/2] firmware: arm_scmi: Ensure automatic module loading
2026-06-18 20:31 UTC (5+ messages)
` [PATCH v2 1/2] module: add SCMI device table alias support
` [PATCH v2 2/2] firmware: arm_scmi: request modules for discovered protocols
[PATCH v2 0/2] thermal: qcom: add support for PMIC5 Gen3 ADC thermal monitoring
2026-06-18 10:22 UTC (13+ messages)
` [PATCH v2 1/2] iio: adc: qcom-spmi-adc5-gen3: Share SDAM0 IRQ with ADC_TM auxiliary driver
` [PATCH v2 2/2] thermal: qcom: add support for PMIC5 Gen3 ADC thermal monitoring
[PATCH v10 0/5] iio: adc: add Versal SysMon driver
2026-06-18 10:14 UTC (6+ messages)
` [PATCH v10 1/5] dt-bindings: iio: adc: add xlnx,versal-sysmon binding
` [PATCH v10 2/5] iio: adc: add Versal SysMon driver
` [PATCH v10 3/5] iio: adc: versal-sysmon: add I2C driver
` [PATCH v10 4/5] iio: adc: versal-sysmon: add threshold event support
` [PATCH v10 5/5] iio: adc: versal-sysmon: add oversampling support
[PATCH v9 0/5] iio: adc: add Versal SysMon driver
2026-06-18 9:53 UTC (8+ messages)
` [PATCH v9 1/5] dt-bindings: iio: adc: add xlnx,versal-sysmon binding
` [PATCH v9 2/5] iio: adc: add Versal SysMon driver
` [PATCH v9 3/5] iio: adc: versal-sysmon: add I2C driver
` [PATCH v9 4/5] iio: adc: versal-sysmon: add threshold event support
` [PATCH v9 5/5] iio: adc: versal-sysmon: add oversampling support
[PATCH V13 0/9] Add Invensense ICM42607
2026-06-17 21:10 UTC (4+ messages)
` [PATCH V13 8/9] iio: imu: inv_icm42607: Add Gyroscope to icm42607
[PATCH 0/9] HID: iio: Fix race condition between callback registration and device exposure
2026-06-17 19:50 UTC (7+ messages)
` [PATCH 2/9] iio: orientation: hid-sensor-incl-3d: Fix race "
[PATCH 00/11] HID: iio: warning clean up and prefer kernel coding style
2026-06-17 19:03 UTC (3+ messages)
[PATCH v8 0/5] iio: adc: add Versal SysMon driver
2026-06-17 16:34 UTC (13+ messages)
` [PATCH v8 2/5] "
` [PATCH v8 3/5] iio: adc: versal-sysmon: add I2C driver
` [PATCH v8 4/5] iio: adc: versal-sysmon: add threshold event support
` [PATCH v8 5/5] iio: adc: versal-sysmon: add oversampling support
[PATCH 0/3] HID: iio: callback API signature match for usage_id
2026-06-17 15:52 UTC (2+ messages)
[PATCH 0/4] iio: adc: new ti-ads112c14 driver
2026-06-17 15:34 UTC (7+ messages)
` [PATCH 1/4] dt-bindings: iio: adc: add ti,ads122c14
[PATCH v2 0/3] iio: magnetometer: add driver for QST QMC5883L Sensor
2026-06-17 13:59 UTC (4+ messages)
` [PATCH v2 3/3] "
[PATCH v5 00/14] mfd: lm3533: convert to OF bindings, improve support
2026-06-17 10:32 UTC (3+ messages)
` [PATCH v5 02/14] mfd: lm3533: Remove driver specific regmap wrappers
[PATCH v6 0/8] iio: light: opt3001: driver cleanup
2026-06-17 10:21 UTC (3+ messages)
` [PATCH v6 8/8] iio: light: opt3001: add comment to mutex
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox