messages from 2026-09-30 17:15:03 to 2026-10-05 09:43:17 UTC [more...]
[PATCH v4 00/15] iio: adc: xilinx-xadc: Add I2C interface support for System Management Wizard
2026-10-05 9:42 UTC (14+ messages)
` [PATCH v4 01/15] iio: adc: xilinx-xadc: Correct write edge in CFG
` [PATCH v4 02/15] iio: adc: xilinx-xadc: Fix coding style issues
` [PATCH v4 03/15] iio: adc: xilinx-xadc: Use kernel integer types
` [PATCH v4 04/15] iio: adc: xilinx-xadc: Drop unnecessary masking and dead code
` [PATCH v4 05/15] iio: adc: xilinx-xadc: Use bitfield helpers and bit macros
` [PATCH v4 06/15] iio: adc: xilinx-xadc: Use guard()/scoped_guard() for spinlock locking
` [PATCH v4 07/15] iio: adc: xilinx-xadc: Simplify common coding patterns
` [PATCH v4 08/15] iio: adc: xilinx-xadc: Add unit suffixes to macro names
` [PATCH v4 09/15] iio: adc: xilinx-xadc: Drop unused header files
` [PATCH v4 10/15] iio: adc: xilinx-xadc: Add clarifying comments
` [PATCH v4 11/15] iio: adc: xilinx-xadc: Refine Zynq read/write error handling on timeout/interrupt
` [PATCH v4 12/15] iio: adc: xilinx-xadc: Add helper functions for the device setup
` [PATCH v4 14/15] iio: adc: xilinx-xadc: Add .setup_channels() to struct xadc_ops
[PATCH v2 00/15] MTU3 counter fixes and improvements
2026-10-05 8:45 UTC (17+ messages)
` [PATCH v2 01/15] counter: rz-mtu3-cnt: put runtime PM on initialization error path
` [PATCH v2 02/15] counter: rz-mtu3-cnt: do not assign struct rz_mtu3_channel::dev
` [PATCH v2 03/15] counter: rz-mtu3-cnt: remove manual runtime PM handling
` [PATCH v2 04/15] counter: rz-mtu3-cnt: use device-managed pm_runtime_enable()
` [PATCH v2 05/15] counter: rz-mtu3-cnt: read enable value from cache
` [PATCH v2 06/15] counter: rz-mtu3-cnt: disable channel before releasing
` [PATCH v2 07/15] counter: rz-mtu3-cnt: unify ceiling values
` [PATCH v2 08/15] counter: rz-mtu3-cnt: cache "
` [PATCH v2 09/15] counter: rz-mtu3-cnt: cache count values
` [PATCH v2 10/15] counter: rz-mtu3-cnt: cache function values
` [PATCH v2 11/15] counter: rz-mtu3-cnt: cache external input phase clock value
` [PATCH v2 12/15] counter: rz-mtu3-cnt: cache direction values
` [PATCH v2 13/15] counter: rz-mtu3-cnt: keep cascade_counts_enable in sync with usage
` [PATCH v2 14/15] counter: rz-mtu3-cnt: drop conditional locks
` [PATCH v2 15/15] counter: rz-mtu3-cnt: use pm_runtime_resume_and_get()
[PATCH v5 0/6] Add support for InvenSense ICM-42370-P accelerometer
2026-10-05 0:51 UTC (21+ messages)
` [PATCH v5 1/6] dt-bindings: iio: imu: icm42600: Add ICM-42670-P
` [PATCH v5 2/6] iio: imu: inv_icm42607: Simplify IIO channel macros
` [PATCH v5 3/6] iio: imu: inv_icm42607: Initialize gyro based on chip_info
` [PATCH v5 4/6] iio: imu: inv_icm42607: Add support for ICM-42370-P
` [PATCH v5 5/6] iio: imu: inv_icm42607: Implement MREGx register access
` [PATCH v5 6/6] iio: imu: inv_icm42607: Add accelerometer calibbias support
[PATCH] iio: adc: mcp3422: use sysfs_emit() in show functions
2026-10-04 16:38 UTC (7+ messages)
` [PATCH v3 0/2] iio: adc: mcp3422: chip info and read_avail()
` [PATCH v3 1/2] iio: adc: mcp3422: describe parts with chip_info
` [PATCH v3 2/2] iio: adc: mcp3422: use read_avail() for available attributes
[PATCH 0/5] iio: dac: ad5758: fix DMA alignment, raw range, offset and 4-20 mA
2026-10-04 16:27 UTC (5+ messages)
` [PATCH 4/5] dt-bindings: iio: dac: adi,ad5758: Fix the 4 mA to 20 mA current range
[PATCH] iio: imu: inv_icm42600: drop stale vdd_supply kernel-doc
2026-10-04 10:43 UTC (3+ messages)
[PATCH] iio: common: scmi_sensors: fix truncating 64-bit divisions
2026-10-04 10:43 UTC (3+ messages)
[PATCH] iio: ssp: Serialize watchdog timer state changes
2026-10-04 9:31 UTC (7+ messages)
` [PATCH v2] "
[PATCH] iio: adc: qcom-spmi-adc5-gen3: fix lock annotations on mutex helpers
2026-10-04 8:42 UTC (2+ messages)
[PATCH v4 01/10] dmaengine: Move enum dma_slave_buswidth to a new header
2026-10-04 8:31 UTC (15+ messages)
[PATCH v5 0/2] iio: pressure: add Sensirion SDP31 driver
2026-10-04 7:53 UTC (5+ messages)
` [PATCH v5 1/2] dt-bindings: iio: pressure: add Sensirion SDP31
` [PATCH v5 2/2] iio: pressure: add Sensirion SDP31 driver
[PATCH 0/2] iio: proximity: Add Vishay VCNL36829 driver
2026-10-04 7:39 UTC (5+ messages)
` [PATCH 1/2] dt-bindings: iio: proximity: Add Vishay VCNL36829
` [PATCH 2/2] iio: proximity: Add driver for "
[PATCH v2] iio: temperature: ltc2983: pass leak detector type explicitly
2026-10-03 21:39 UTC (3+ messages)
[PATCH v12 0/5] iio: pressure: dps310: hardware FIFO support
2026-10-03 19:50 UTC (6+ messages)
` [PATCH v12 1/5] iio: pressure: dps310: use devm_mutex_init()
` [PATCH v12 2/5] iio: pressure: dps310: read buffered samples from the hardware FIFO
` [PATCH v12 3/5] iio: pressure: dps310: derive the drain interval from the watermark
` [PATCH v12 4/5] iio: pressure: dps310: implement .hwfifo_flush_to_buffer()
` [PATCH v12 5/5] iio: pressure: dps310: assert the lock at runtime too
[PATCH v11 0/5] iio: pressure: dps310: hardware FIFO support
2026-10-03 19:30 UTC (12+ messages)
` [PATCH v11 1/5] iio: pressure: dps310: use devm_mutex_init()
` [PATCH v11 2/5] iio: pressure: dps310: read buffered samples from the hardware FIFO
` [PATCH v11 3/5] iio: pressure: dps310: derive the drain interval from the watermark
` [PATCH v11 4/5] iio: pressure: dps310: implement .hwfifo_flush_to_buffer()
` [PATCH v11 5/5] iio: pressure: dps310: assert the lock at runtime too
[PATCH v4] iio: pressure: dps310: fix overflow in pressure compensation
2026-10-03 18:57 UTC
[PATCH] iio: temperature: ltc2983: avoid -Wstring-compare warning
2026-10-03 17:41 UTC (5+ messages)
[PATCH 0/3] staging: iio: accel: adis16203: fix axis mapping and cleanups
2026-10-03 15:27 UTC (6+ messages)
[PATCH 0/5] PM: runtime: Improve autosuspend child to parent propagation
2026-10-03 15:21 UTC (7+ messages)
` [PATCH 1/5] PM: runtime: Only queue an idle check for RPM-linked suppliers (part 2)
` [PATCH 2/5] PM: runtime: Convert last_busy to atomic64_t
` [PATCH 3/5] PM: runtime: Propagate last_busy from dependent to dependency
` [PATCH 4/5] PM: runtime: Add tests for last_busy propagation
` [PATCH 5/5] iio: adc: stm32-adc: Drop runtime_idle()
[PATCH] docs: iio: add documentation for ti-ads112c14 driver
2026-10-02 20:05 UTC
[REGRESSION] amd_sfh: accelerometer broken since 6.19 ("Event data for report 1 was too short (15 vs 14)")
2026-10-02 15:20 UTC (2+ messages)
[PATCH 0/4] Exynos850 ADC support and soc thermistor
2026-10-02 14:33 UTC (9+ messages)
` [PATCH 1/4] dt-bindings: iio: adc: samsung,exynos: Add Exynos850 compatible
` [PATCH 2/4] iio: adc: exynos_adc: add Exynos850 support
` [PATCH 3/4] arm64: dts: exynos850: add ADC node
` [PATCH 4/4] arm64: dts: exynos850-e850-96: add soc thermistor node
[PATCH] iio: temperature: ltc2983: avoid string comparison for leak detector
2026-10-02 13:40 UTC (5+ messages)
[PATCH 0/2] iio: imu: Add support for the ADI ADIS16607
2026-10-02 11:05 UTC (7+ messages)
` [PATCH 1/2] dt-bindings: iio: imu: Add bindings for "
` [PATCH 2/2] iio: imu: Add driver for the "
[PATCH 0/3] iio: adc: stm32: add mdf support for stm32mp2
2026-10-02 9:34 UTC (9+ messages)
` [PATCH 1/3] dt-bindings: iio: adc: add bindings for stm32 mdf filter
` [PATCH 2/3] iio: adc: add stm32 mdf support
[PATCH RFC 0/3] Add E notation support to kstrtodec64() and IIO sysfs writes
2026-10-02 9:28 UTC (8+ messages)
` [PATCH RFC 1/3] lib: kstrtox: support E notation in kstrtoudec64() and kstrtodec64()
` [PATCH RFC 2/3] lib: test-kstrtox: add E notation tests for kstrto[u]dec64()
` [PATCH RFC 3/3] iio: core: use kstrtodec64() to parse fixed-point values
[PATCH v3] iio: pressure: dps310: fix overflow in pressure compensation
2026-10-02 9:25 UTC (2+ messages)
[PATCH v2 0/3] iio: adc: aspeed: Fix SCU lookup for multi-SCU AST2700
2026-10-02 9:23 UTC (8+ messages)
` [PATCH v2 1/3] dt-bindings: iio: adc: Add syscon property for multi-SCU SoCs
` [PATCH v2 2/3] iio: adc: aspeed: Use syscon phandle for trimming data when available
` [PATCH v2 3/3] arm64: dts: aspeed: Add syscon phandle to AST2700 ADC nodes
[PATCH v5 00/10] iio: adc: ti-ads1015: modernize resource management and bitfield logic
2026-10-01 18:01 UTC (12+ messages)
` [PATCH v5 02/10] iio: adc: ti-ads1015: sort headers alphabetically
` [PATCH v5 03/10] iio: adc: ti-ads1015: return -ENODATA when match data is missing
` [PATCH v5 05/10] iio: adc: ti-ads1015: use dev_err_probe() for error handling
` [PATCH v5 09/10] iio: adc: ti-ads1015: inline ads1015_set_conv_mode()
` [PATCH v5 10/10] iio: adc: ti-ads1015: replace custom shift macros with FIELD_PREP/GET
[PULL] IIO: Fixes for late in the 7.3 cycle - (7.4 merge window soon enough)
2026-10-01 12:57 UTC (2+ messages)
[PULL] IIO: First set of new device support, features, cleanup and fixes for 7.4
2026-10-01 11:36 UTC (2+ messages)
[PATCH v10 0/4] iio: pressure: dps310: hardware FIFO support
2026-10-01 11:26 UTC (5+ messages)
` [PATCH v10 1/4] iio: pressure: dps310: read buffered samples from the hardware FIFO
[PATCH 0/3] iio: adc: aspeed: Fix SCU lookup for multi-SCU AST2700
2026-10-01 7:18 UTC (6+ messages)
` [PATCH 1/3] dt-bindings: iio: adc: Add syscon property for multi-SCU SoCs
` [PATCH 2/3] iio: adc: aspeed: Use syscon phandle for trimming data when available
` [PATCH 3/3] arm64: dts: aspeed: Add syscon phandle to AST2700 ADC nodes
[PATCH v3 00/13] iio: adc: ad4134: Enable greater sample rate data capture
2026-09-30 22:29 UTC (10+ messages)
` [PATCH v3 07/13] iio: adc: ad4134: Support buffered data read
` [PATCH v3 08/13] dt-bindings: iio: adc: adi,ad4134: Document SPI connection mode
` [PATCH v3 10/13] iio: adc: ad4134: Support SPI 4-wire mode
` [PATCH v3 12/13] iio: adc: ad4134: Support high-speed data capture
[PATCH v3 00/15] iio: adc: stm32: add support for stm32mp23 and stm32mp25
2026-09-30 21:18 UTC (3+ messages)
` [PATCH v3 01/15] dt-bindings: iio: adc: stm32-adc: "
[PATCH v2] HID: sensor-hub: Fail unfinished multi-value reads on remo
2026-09-30 17:59 UTC (5+ messages)
` [PATCH v3] HID: sensor-hub: Fail unfinished multi-value reads on removal
[PATCH 0/8] Add ADC support for RZ/V2H(P) and RZ/V2N SoCs
2026-09-30 17:14 UTC (4+ messages)
` [PATCH 8/8] iio: adc: rzt2h: Add support for RZ/V2H(P) SoC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox