messages from 2026-10-05 09:43:23 to 2026-10-10 06:53:41 UTC [more...]
[PATCH v5 00/10] iio: adc: Add TI ADS126X ADC family support
2026-10-10 6:52 UTC (5+ messages)
` [PATCH v5 01/10] dt-bindings: adc: add excitation-current-chopping property
` [PATCH v5 02/10] dt-bindings: iio: adc: support the TI ADS126x ADC family
` [PATCH v5 03/10] iio: adc: add the ti-ads1262 driver
` [PATCH v5 04/10] iio: adc: ti-ads1262: support per-channel sampling frequency
[PATCH v5 0/9] dmaengine: Support bus widths of 32 bytes and above
2026-10-10 2:45 UTC (12+ messages)
` [PATCH v5 1/9] "
` [PATCH v5 2/9] dmaengine: dma-axi-dmac: Use bus width capability helpers
` [PATCH v5 3/9] dmaengine: dw-axi-dmac: "
` [PATCH v5 4/9] dmaengine: qcom: gpi: "
` [PATCH v5 5/9] dmaengine: stm32-dma3: "
` [PATCH v5 6/9] iio: buffer-dmaengine: Use dma_slave_caps bus width accessors
` [PATCH v5 7/9] ALSA: pcm_dmaengine: Use dma_slave_caps bus width helpers
` [PATCH v5 8/9] spi: dw: "
` [PATCH v5 9/9] dmaengine: Drop legacy bus width fields from dma_slave_caps
[PATCH v2 0/2] iio: adc: ti-ads112c14: add gpio support
2026-10-09 23:25 UTC (3+ messages)
` [PATCH v2 1/2] iio: adc: ti-ads112c14: parameterize GPIO register field macros
` [PATCH v2 2/2] iio: adc: ti-ads112c14: add gpio support
[PATCH] iio: adc: ti-ads112c14: add gpio support
2026-10-09 23:14 UTC (5+ messages)
[PATCH v2 0/2] iio: adc: ti-ads112c14: minor fixes
2026-10-09 22:24 UTC (3+ messages)
` [PATCH v2 1/2] iio: adc: ti-ads112c14: fix negative settlingtime check
` [PATCH v2 2/2] iio: adc: ti-ads112c14: fix settlingtime creep on write back
[PATCH 0/3] iio: adc: stm32: add mdf support for stm32mp2
2026-10-09 19:12 UTC (14+ messages)
` [PATCH 1/3] dt-bindings: iio: adc: add bindings for stm32 mdf filter
[PATCH v2 0/8] Add ADC driver support for RZ/V2H(P) and RZ/V2N SoCs
2026-10-09 18:41 UTC (9+ messages)
` [PATCH v2 1/8] dt-bindings: iio: adc: renesas,r9a09g077-adc: Add RZ/V2H(P) and RZ/V2N support
` [PATCH v2 2/8] iio: adc: rzt2h: Wait for the analog part to stop after a forced stop
` [PATCH v2 3/8] iio: adc: rzt2h: Add chip-specific configuration
` [PATCH v2 4/8] iio: adc: rzt2h: Add optional reset support
` [PATCH v2 5/8] iio: adc: rzt2h: Prepare for SoCs without sample state registers
` [PATCH v2 6/8] iio: adc: rzt2h: Prepare for SoCs with different ADC info
` [PATCH v2 7/8] iio: adc: rzt2h: Use scan type for ADC scale
` [PATCH v2 8/8] iio: adc: rzt2h: Add support for RZ/V2H(P) SoC
[PATCH 0/6] iio: adc: ltc2497: add LTC2493 support and line-frequency rejection
2026-10-09 14:45 UTC (9+ messages)
` [PATCH 1/6] dt-bindings: iio: adc: lltc,ltc2497: add LTC2493 support
` [PATCH 2/6] iio: adc: ltc2497: "
` [PATCH 3/6] iio: adc: ltc2497: add LTC2493 internal temperature channel
` [PATCH 4/6] iio: adc: ltc2497: add 2x speed mode support for the LTC2493
` [PATCH 5/6] iio: adc: ltc2497: add FA/FB line-frequency rejection selection
` [PATCH 6/6] iio: adc: ltc2497: enable line-frequency rejection on LTC2493
[PATCH v6 0/6] Add support for InvenSense ICM-42370-P accelerometer
2026-10-09 14:12 UTC (7+ messages)
` [PATCH v6 1/6] dt-bindings: iio: imu: icm42600: Add ICM-42670-P
` [PATCH v6 2/6] iio: imu: inv_icm42607: Simplify IIO channel macros
` [PATCH v6 3/6] iio: imu: inv_icm42607: Initialize gyro based on chip_info
` [PATCH v6 4/6] iio: imu: inv_icm42607: Add support for ICM-42370-P
` [PATCH v6 5/6] iio: imu: inv_icm42607: Implement MREGx register access
` [PATCH v6 6/6] iio: imu: inv_icm42607: Add accelerometer calibbias support
[REGRESSION] amd_sfh: accelerometer broken since 6.19 ("Event data for report 1 was too short (15 vs 14)")
2026-10-09 11:49 UTC (3+ messages)
[PATCH v4 01/10] dmaengine: Move enum dma_slave_buswidth to a new header
2026-10-09 9:15 UTC (15+ messages)
[PATCH] counter: microchip-tcb-capture: fix clk reference leak
2026-10-09 5:57 UTC
[PATCH v6 00/14] HID: iio: Introduce devm_ APIs for HID sensors
2026-10-09 1:30 UTC (3+ messages)
[PATCH] iio: afe: iio-rescale: Add platform IDs
2026-10-08 21:27 UTC
[PATCH v4 0/3] Add support for Microchip PAC1711 Power Monitor
2026-10-08 16:46 UTC (6+ messages)
` [PATCH v4 1/3] iio: core: add IIO_CHARGE channel type
` [PATCH v4 2/3] dt-bindings: iio: adc: add support for PAC1711
` [PATCH v4 3/3] "
[PATCH] iio: adc: qcom-spmi-adc5-gen3: Allocate unique ADC_TM aux device IDs
2026-10-08 12:38 UTC (3+ messages)
[PATCH v2 0/6] iio: imu: Add support for the ADI ADIS16607
2026-10-08 10:14 UTC (8+ messages)
` [PATCH v2 1/6] iio: imu: adis: Add optional self_test callback and fix custom reset dispatch
` [PATCH v2 2/6] dt-bindings: iio: imu: Add bindings for ADI ADIS16607
` [PATCH v2 3/6] iio: imu: Add driver for the "
` [PATCH v2 4/6] iio: imu: adis16607: Add FIFO-based buffered/triggered capture
` [PATCH v2 5/6] iio: imu: adis16607: Add external clock sync support
` [PATCH v2 6/6] iio: imu: adis16607: Add calibration bias support for gyro/accel
[PATCH] iio: dac: ad5529r: Clean up definitions and regmap configuration
2026-10-08 9:19 UTC
[PATCH 0/2] iio: hid-sensors: fix shared callbacks in temperature and humidity
2026-10-08 7:55 UTC (9+ messages)
` [PATCH 1/2] iio: temperature: hid-sensor-temperature: Use per-instance callbacks
` [PATCH 2/2] iio: humidity: hid-sensor-humidity: "
` [PATCH v2 0/3] iio: hid-sensors: fix shared callbacks in temperature and humidity
` [PATCH v2 1/3] HID: hid-sensor-hub: Synchronize callback removal with raw events
` [PATCH v2 2/3] iio: temperature: hid-sensor-temperature: Use per-instance callbacks
` [PATCH v2 3/3] iio: humidity: hid-sensor-humidity: "
[PATCH] iio: accel: adxl313: add missing buffer selections in Kconfig
2026-10-08 7:41 UTC (2+ messages)
[PATCH] iio: accel: adxl345: select IIO_BUFFER and IIO_KFIFO_BUF
2026-10-08 7:31 UTC (2+ messages)
[PATCH v1 1/1] iio: Allow device drivers to specify IIO event unit type
2026-10-08 5:27 UTC
[PATCH] counter: rz-mtu3-cnt: put runtime PM ref if counter init fails
2026-10-08 2:05 UTC
[PATCH v2 00/15] MTU3 counter fixes and improvements
2026-10-08 2:02 UTC (4+ messages)
` "
[PATCH 5.15.y] iio: buffer: serialize buffer teardown with mode claims
2026-10-07 21:03 UTC (2+ messages)
[PATCH 6.1.y] iio: buffer: serialize buffer teardown with mode claims
2026-10-07 21:03 UTC (2+ messages)
[PATCH v6 0/2] iio: pressure: add Sensirion SDP31 driver
2026-10-07 20:51 UTC (3+ messages)
` [PATCH v6 1/2] dt-bindings: iio: pressure: add Sensirion SDP31
` [PATCH v6 2/2] iio: pressure: add Sensirion SDP31 driver
[PATCH v2] staging: iio: adt7316: use kstrtobool() for sysfs boolean parsing
2026-10-07 13:51 UTC
[PATCH 0/2] Add interrupt support on TMP117
2026-10-07 13:05 UTC (7+ messages)
` [PATCH 1/2] dt-bindings: iio: ti,tmp117: describe interrupts for TMP117
` [PATCH 2/2] iio: temperature: tmp117: add support for HIGH and LOW alerts
[PATCH v2 0/5] iio: dac: ad5758: fix the 4 mA to 20 mA current range
2026-10-07 10:24 UTC (4+ messages)
` [PATCH v2 4/5] dt-bindings: iio: dac: adi,ad5758: Fix "
` [PATCH v2 5/5] iio: dac: ad5758: "
[PATCH v4 00/13] iio: adc: ad4134: Enable greater sample rate data capture
2026-10-07 10:14 UTC (15+ messages)
` [PATCH v4 01/13] iio: adc: ad4134: Adjust register map range
` [PATCH v4 02/13] iio: adc: ad4134: Sign extend sample data
` [PATCH v4 03/13] iio: adc: ad4134: Update include list to comply with IWYU principles
` [PATCH v4 04/13] iio: adc: ad4134: Serialize single-read operations
` [PATCH v4 05/13] iio: adc: ad4134: Run shorter transfers when CRC is disabled
` [PATCH v4 06/13] iio: adc: ad4134: Add support for digital filter type selection
` [PATCH v4 07/13] iio: adc: ad4134: Support buffered data read
` [PATCH v4 08/13] dt-bindings: iio: adc: adi,ad4134: Document SPI connection mode
` [PATCH v4 09/13] dt-bindings: iio: adc: adi,ad4134: Document external multiplexer usage
` [PATCH v4 10/13] iio: adc: ad4134: Support SPI 4-wire mode
` [PATCH v4 11/13] dt-bindings: iio: adc: adi,ad4134: Document PWM usage
` [PATCH v4 12/13] iio: adc: ad4134: Support high-speed data capture
` [PATCH v4 13/13] Docs: iio: Add AD4134
[PATCH] iio: hid-sensor: Fix scale for magnetic north heading
2026-10-07 0:01 UTC
[PATCH 00/13] PM: runtime: Convert pm_runtime_put_autosuspend() and friends to a void function
2026-10-06 23:13 UTC (2+ messages)
` [PATCH 03/13] iio: Discard pm_runtime_put_autosuspend() return values
[RFC PATCH] iio: adis_buffer: fix buffer ordering for IIO core demultiplexing
2026-10-06 17:14 UTC (2+ messages)
` [PING][RFC "
[PATCH] staging: iio: adt7316: use kstrtobool() for sysfs boolean parsing
2026-10-06 15:10 UTC (2+ messages)
[PATCH 0/5] PM: runtime: Improve autosuspend child to parent propagation
2026-10-06 12:42 UTC (6+ messages)
` [PATCH 3/5] PM: runtime: Propagate last_busy from dependent to dependency
` [PATCH 5/5] iio: adc: stm32-adc: Drop runtime_idle()
[PATCH] staging: iio: adc: ad7816: remove obsolete driver
2026-10-06 11:51 UTC
[PATCH v2 0/2] iio: proximity: Add Vishay VCNL36829 driver
2026-10-06 11:44 UTC (4+ messages)
` [PATCH v2 1/2] dt-bindings: iio: proximity: Add Vishay VCNL36829
` [PATCH v2 2/2] iio: proximity: Add driver for "
[PATCH v4 00/15] iio: adc: stm32: add support for stm32mp23 and stm32mp25
2026-10-06 7:57 UTC (16+ messages)
` [PATCH v4 01/15] dt-bindings: iio: adc: stm32-adc: "
` [PATCH v4 02/15] iio: adc: stm32-adc: core: manage clock prescaler diversity
` [PATCH v4 03/15] iio: adc: stm32-adc: core: configurable number of interrupts
` [PATCH v4 04/15] iio: adc: stm32-adc: manage characterization voltage diversity
` [PATCH v4 05/15] iio: adc: stm32-adc: rework internal channels data
` [PATCH v4 06/15] iio: adc: stm32-adc: add vreg enable option to manage diversity
` [PATCH v4 07/15] iio: adc: stm32-adc: preferred style cleanup
` [PATCH v4 08/15] iio: adc: stm32-adc: add support for stm32mp25
` [PATCH v4 09/15] iio: adc: stm32-adc: add support for stm32mp23
` [PATCH v4 10/15] iio: adc: stm32-adc: add support for vddgpu on stm32mp23 and stm32mp25
` [PATCH v4 11/15] arm64: dts: st: add vrefint calibration on stm32mp23
` [PATCH v4 12/15] arm64: dts: st: add vrefint calibration on stm32mp25
` [PATCH v4 13/15] arm64: dts: st: add ADC nodes on stm32mp231
` [PATCH v4 14/15] arm64: dts: st: add ADC nodes on stm32mp251
` [PATCH v4 15/15] arm64: dts: st: add ADC support on stm32mp257f-ev1 board
[PATCH 00/12] iio: use designated initializers for acpi_device_id
2026-10-06 7:26 UTC (14+ messages)
` [PATCH 01/12] iio: accel: use named "
` [PATCH 02/12] iio: adc: "
` [PATCH 03/12] iio: dac: "
` [PATCH 04/12] iio: gyro: bmg160_i2c: "
` [PATCH 05/12] iio: humidity: "
` [PATCH 06/12] iio: imu: "
` [PATCH 07/12] iio: light: "
` [PATCH 08/12] iio: magnetometer: "
` [PATCH 09/12] iio: potentiometer: max5487: "
` [PATCH 10/12] iio: pressure: "
` [PATCH 11/12] iio: proximity: "
` [PATCH 12/12] iio: temperature: max30208: "
[PATCH v2 0/2] iio: imu: inv_icm42600: fix kernel-doc warnings
2026-10-06 6:46 UTC (4+ messages)
` [PATCH v2 1/2] iio: imu: inv_icm42600: drop stale vdd_supply kernel-doc
` [PATCH v2 2/2] iio: imu: inv_icm42600: fix kernel-doc Return: sections
[PATCH] iio: trigger: Return an error when the trigger has no free irq
2026-10-06 6:43 UTC (2+ messages)
[PATCH v2] iio: common: scmi_sensors: fix truncating 64-bit divisions
2026-10-06 4:52 UTC
[PATCH v5 0/6] Add support for InvenSense ICM-42370-P accelerometer
2026-10-05 15:02 UTC (6+ messages)
` [PATCH v5 5/6] iio: imu: inv_icm42607: Implement MREGx register access
[PATCH v3] iio: temperature: tsys02d: Fix state desynchronization on resolution write error
2026-10-05 14:19 UTC (2+ messages)
[PATCH v4 00/15] iio: adc: xilinx-xadc: Add I2C interface support for System Management Wizard
2026-10-05 13:13 UTC (10+ messages)
` [PATCH v4 06/15] iio: adc: xilinx-xadc: Use guard()/scoped_guard() for spinlock locking
` [PATCH v4 09/15] iio: adc: xilinx-xadc: Drop unused header files
` [PATCH v4 10/15] iio: adc: xilinx-xadc: Add clarifying comments
` [PATCH v4 13/15] iio: adc: xilinx-xadc: Split driver into core and platform files
` [PATCH v4 15/15] iio: adc: xilinx-xadc: Add I2C interface support
[PATCH 0/2] iio: imu: Add support for the ADI ADIS16607
2026-10-05 12:53 UTC (4+ messages)
` [PATCH 1/2] dt-bindings: iio: imu: Add bindings for "
[PATCH v3 0/3] iio: adc: aspeed: Fix SCU lookup for multi-SCU AST2700
2026-10-05 10:22 UTC (4+ messages)
` [PATCH v3 1/3] dt-bindings: iio: adc: Add syscon property for multi-SCU SoCs
` [PATCH v3 2/3] iio: adc: aspeed: Use syscon phandle for trimming data when available
` [PATCH v3 3/3] arm64: dts: aspeed: Add syscon phandle to AST2700 ADC nodes
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox