messages from 2026-10-09 11:49:32 to 2026-10-13 11:21:52 UTC [more...]
[PATCH v2 0/6] iio: pressure: dps310: fix pressure overflow, add Zilltek ZTS8032
2026-10-13 11:21 UTC (7+ messages)
` [PATCH v2 1/6] iio: pressure: dps310: fix overflow in the pressure compensation
` [PATCH v2 2/6] dt-bindings: vendor-prefixes: Add ZillTek Technology
` [PATCH v2 3/6] dt-bindings: iio: pressure: infineon,dps310: Add Zilltek ZTS8032
` [PATCH v2 4/6] iio: pressure: dps310: add per-chip data
` [PATCH v2 5/6] iio: pressure: dps310: add an OF match table
` [PATCH v2 6/6] iio: pressure: dps310: add Zilltek ZTS8032 support
[PATCH 0/4] iio: adc: ade9000: add support for ADE9039
2026-10-13 9:51 UTC (11+ messages)
` [PATCH 1/4] iio: adc: ade9000: parameterise the reactive power channel
` [PATCH 2/4] dt-bindings: iio: adc: adi,ade9000: add adi,ade9039 compatible
` [PATCH 3/4] iio: adc: ade9000: add support for ADE9039
` [PATCH 4/4] docs: iio: ade9000: document ADE9039 support
[PATCH] iio: accel: adxl345: select IIO_BUFFER and IIO_KFIFO_BUF
2026-10-13 9:00 UTC (2+ messages)
[PATCH] staging: iio: addac: adt7316: use dev_err_probe() for ldac GPIO
2026-10-13 8:54 UTC (6+ messages)
[PATCH v6 0/6] Add support for InvenSense ICM-42370-P accelerometer
2026-10-13 7:42 UTC (15+ messages)
` [PATCH v6 1/6] dt-bindings: iio: imu: icm42600: Add ICM-42670-P
` [PATCH v6 2/6] iio: imu: inv_icm42607: Simplify IIO channel macros
` [PATCH v6 3/6] iio: imu: inv_icm42607: Initialize gyro based on chip_info
` [PATCH v6 4/6] iio: imu: inv_icm42607: Add support for ICM-42370-P
` [PATCH v6 5/6] iio: imu: inv_icm42607: Implement MREGx register access
` [PATCH v6 6/6] iio: imu: inv_icm42607: Add accelerometer calibbias support
[PATCH v4 00/13] iio: adc: ad4134: Enable greater sample rate data capture
2026-10-13 7:20 UTC (3+ messages)
` [PATCH v4 07/13] iio: adc: ad4134: Support buffered data read
[PATCH 0/5] PM: runtime: Improve autosuspend child to parent propagation
2026-10-13 6:11 UTC (7+ messages)
` [PATCH 3/5] PM: runtime: Propagate last_busy from dependent to dependency
[PATCH] iio: afe: rescale: always expose offset
2026-10-12 21:23 UTC (2+ messages)
[PATCH v2] iio: light: cm32181: add support for the CM32183
2026-10-12 21:21 UTC (4+ messages)
[PATCH] iio: dac: ad5529r: Clean up definitions and regmap configuration
2026-10-12 21:19 UTC (3+ messages)
[PATCH] iio: common: cros_ec_sensors: use sensor_scale union member for CALIBSCALE
2026-10-12 21:17 UTC (3+ messages)
[PATCH v2 0/8] Add ADC driver support for RZ/V2H(P) and RZ/V2N SoCs
2026-10-12 21:07 UTC (11+ messages)
` [PATCH v2 1/8] dt-bindings: iio: adc: renesas,r9a09g077-adc: Add RZ/V2H(P) and RZ/V2N support
` [PATCH v2 2/8] iio: adc: rzt2h: Wait for the analog part to stop after a forced stop
` [PATCH v2 3/8] iio: adc: rzt2h: Add chip-specific configuration
` [PATCH v2 4/8] iio: adc: rzt2h: Add optional reset support
` [PATCH v2 5/8] iio: adc: rzt2h: Prepare for SoCs without sample state registers
` [PATCH v2 6/8] iio: adc: rzt2h: Prepare for SoCs with different ADC info
` [PATCH v2 7/8] iio: adc: rzt2h: Use scan type for ADC scale
` [PATCH v2 8/8] iio: adc: rzt2h: Add support for RZ/V2H(P) SoC
[PATCH v4 00/15] iio: adc: stm32: add support for stm32mp23 and stm32mp25
2026-10-12 21:07 UTC (4+ messages)
` [PATCH v4 05/15] iio: adc: stm32-adc: rework internal channels data
[PATCH] staging: iio: adt7316: use kstrtobool() for sysfs boolean parsing
2026-10-12 21:05 UTC (2+ messages)
[PATCH v5 00/10] iio: adc: Add TI ADS126X ADC family support
2026-10-12 21:02 UTC (12+ messages)
` [PATCH v5 01/10] dt-bindings: adc: add excitation-current-chopping property
` [PATCH v5 02/10] dt-bindings: iio: adc: support the TI ADS126x ADC family
` [PATCH v5 03/10] iio: adc: add the ti-ads1262 driver
` [PATCH v5 04/10] iio: adc: ti-ads1262: support per-channel sampling frequency
` [PATCH v5 05/10] iio: adc: ti-ads1262: support per-channel reference and gain
` [PATCH v5 06/10] iio: adc: ti-ads1262: support input chopping
` [PATCH v5 07/10] iio: adc: ti-ads1262: support excitation currents
` [PATCH v5 08/10] iio: adc: ti-ads1262: support triggered buffer sampling
` [PATCH v5 09/10] iio: adc: ti-ads1262: support REFOUT and VBIAS regulators
` [PATCH v5 10/10] iio: adc: ti-ads1262: support common mode supplies
[PATCH] iio: acpi: Accept comma separated values in ROTM strings
2026-10-12 20:55 UTC (2+ messages)
[PATCH 0/4] iio: pressure: dps310: fix pressure overflow, add Zilltek ZTS8032
2026-10-12 20:48 UTC (8+ messages)
` [PATCH 1/4] iio: pressure: dps310: fix overflow in the pressure compensation
` [PATCH 2/4] dt-bindings: vendor-prefixes: Add ZillTek Technology
` [PATCH 3/4] dt-bindings: iio: pressure: infineon,dps310: Add Zilltek ZTS8032
` [PATCH 4/4] iio: pressure: dps310: add Zilltek ZTS8032 support
[PATCH 0/1] iio: atlas-ezo: Fix humidity channel read support
2026-10-12 20:45 UTC (6+ messages)
` [PATCH 1/1] "
[PATCH 00/13] PM: runtime: Convert pm_runtime_put_autosuspend() and friends to a void function
2026-10-12 20:39 UTC (4+ messages)
` [PATCH 03/13] iio: Discard pm_runtime_put_autosuspend() return values
` (subset) [PATCH 00/13] PM: runtime: Convert pm_runtime_put_autosuspend() and friends to a void function
[PATCH v2 0/2] iio: proximity: Add Vishay VCNL36829 driver
2026-10-12 20:36 UTC (3+ messages)
` [PATCH v2 2/2] iio: proximity: Add driver for Vishay VCNL36829
[BUG] iio: gyro: mpu3050: use-after-free via trigger left on iio_trigger_list after unbind
2026-10-12 20:09 UTC (3+ messages)
[PATCH v11 0/8] iio: add Open Sensor Fusion UART support
2026-10-12 19:10 UTC (10+ messages)
` [PATCH v11 1/8] dt-bindings: iio: add Open Sensor Fusion device
` [PATCH v11 2/8] Documentation: iio: add Open Sensor Fusion driver overview
` [PATCH v11 3/8] iio: osf: add protocol decoding
` [PATCH v11 4/8] iio: osf: add validated stream parser
` [PATCH v11 5/8] iio: osf: add UART transport and core receive path
` [PATCH v11 6/8] iio: osf: add IIO devices from capability reports
` [PATCH v11 7/8] iio: osf: add core KUnit tests
` [PATCH v11 8/8] iio: osf: add IIO "
[PATCH] iio: light: vcnl4035: Fix reversed ALS mode bit
2026-10-12 15:51 UTC (2+ messages)
[PATCH v6 0/2] iio: pressure: add Sensirion SDP31 driver
2026-10-12 15:09 UTC (3+ messages)
` [PATCH v6 2/2] "
[PATCH RFC 0/3] Add E notation support to kstrtodec64() and IIO sysfs writes
2026-10-12 14:49 UTC (4+ messages)
` [PATCH RFC 3/3] iio: core: use kstrtodec64() to parse fixed-point values
[PATCH v5 0/9] dmaengine: Support bus widths of 32 bytes and above
2026-10-12 14:46 UTC (15+ messages)
` [PATCH v5 1/9] "
` [PATCH v5 2/9] dmaengine: dma-axi-dmac: Use bus width capability helpers
` [PATCH v5 3/9] dmaengine: dw-axi-dmac: "
` [PATCH v5 4/9] dmaengine: qcom: gpi: "
` [PATCH v5 5/9] dmaengine: stm32-dma3: "
` [PATCH v5 6/9] iio: buffer-dmaengine: Use dma_slave_caps bus width accessors
` [PATCH v5 7/9] ALSA: pcm_dmaengine: Use dma_slave_caps bus width helpers
` [PATCH v5 8/9] spi: dw: "
` [PATCH v5 9/9] dmaengine: Drop legacy bus width fields from dma_slave_caps
[PATCH] staging: iio: adc: ad7816: remove obsolete driver
2026-10-12 14:41 UTC (2+ messages)
[PATCH] iio: accel: adxl313: add missing buffer selections in Kconfig
2026-10-12 14:30 UTC (2+ messages)
[PATCH 0/3] staging: iio: accel: adis16203: fix axis mapping and cleanups
2026-10-12 13:22 UTC (4+ messages)
` [PATCH 2/3] staging: iio: accel: adis16203: add missing spi_device_id table
[PATCH 0/3] iio: adc: stm32: add mdf support for stm32mp2
2026-10-12 12:56 UTC (8+ messages)
` [PATCH 1/3] dt-bindings: iio: adc: add bindings for stm32 mdf filter
[PATCH v2 0/6] iio: imu: Add support for the ADI ADIS16607
2026-10-12 12:45 UTC (3+ messages)
` [PATCH v2 3/6] iio: imu: Add driver "
[PATCH 0/2] iio: imu: Add support for the ADI ADIS16607
2026-10-12 11:15 UTC (4+ messages)
` [PATCH 2/2] iio: imu: Add driver "
[PATCH 00/12] iio: use designated initializers for acpi_device_id
2026-10-12 11:01 UTC (7+ messages)
` [PATCH 01/12] iio: accel: use named "
` [PATCH 02/12] iio: adc: "
` [PATCH 07/12] iio: light: "
[PATCH v2] iio: temperature: ltc2983: pass leak detector type explicitly
2026-10-12 11:00 UTC (2+ messages)
[PATCH] iio: imu: inv_mpu6050: fix swapped accel and gyro startup times
2026-10-12 7:54 UTC (2+ messages)
[PATCH] iio: imu: inv_mpu6050: fix magnetometer scale of Y and Z axes
2026-10-12 7:50 UTC (2+ messages)
[PATCH v2 0/2] iio: magnetometer: fix the register restore on resume in mmc35240 and mmc5633
2026-10-12 5:00 UTC (3+ messages)
` [PATCH v2 1/2] iio: magnetometer: mmc35240: leave cache-only mode before the cache sync
` [PATCH v2 2/2] iio: magnetometer: mmc5633: "
[PATCH 0/2] iio: magnetometer: fix the register restore on resume in mmc35240 and mmc5633
2026-10-12 3:13 UTC (6+ messages)
` [PATCH 1/2] iio: magnetometer: mmc35240: leave cache-only mode before the cache sync
` [PATCH 2/2] iio: magnetometer: mmc5633: "
[PATCH] iio: imu: inv_mpu6050: fix kernel-doc warnings
2026-10-11 17:33 UTC (2+ messages)
[PATCH] iio: gyro: mpu3050: add missing trigger cleanup on remove
2026-10-11 17:12 UTC (2+ messages)
[PATCH 1/2] iio: accel: adxl345: propagate errors when reading event configuration
2026-10-11 16:59 UTC (3+ messages)
` [PATCH 2/2] iio: accel: adxl345: propagate errors when disabling activity events
[PATCH] iio: light: cm32181: add support for the CM32183
2026-10-11 16:48 UTC (2+ messages)
[PATCH] iio: dac: ad5686: fix channels member name in kernel-doc
2026-10-11 15:09 UTC (2+ messages)
[PATCH v12 0/5] iio: pressure: dps310: hardware FIFO support
2026-10-11 14:00 UTC (2+ messages)
[PATCH 0/2] Add interrupt support on TMP117
2026-10-11 13:57 UTC (3+ messages)
` [PATCH 2/2] iio: temperature: tmp117: add support for HIGH and LOW alerts
[PATCH v11 0/5] iio: pressure: dps310: hardware FIFO support
2026-10-11 13:42 UTC (6+ messages)
` [PATCH v11 5/5] iio: pressure: dps310: assert the lock at runtime too
[PATCH v4] iio: pressure: dps310: fix overflow in pressure compensation
2026-10-11 13:25 UTC (2+ messages)
[PATCH v3] iio: pressure: dps310: fix overflow in pressure compensation
2026-10-11 13:14 UTC (2+ messages)
[PATCH] iio: gyro: bmg160: reject duplicate event disable
2026-10-11 11:23 UTC (8+ messages)
` "
[PATCH v10 00/10] io: accel: mma8452: Allow open drain interrupt pin configuration
2026-10-11 13:00 UTC (8+ messages)
` [PATCH v10 03/10] iio: accel: mma8452: Fix runtime PM bugs in mma8452_read()
` [PATCH v10 10/10] iio: accel: mma8452: Support interrupt sharing
[PATCH] iio: imu: kmx61: reject duplicate event disable
2026-10-11 11:31 UTC (5+ messages)
` "
[PATCH v6 00/14] HID: iio: Introduce devm_ APIs for HID sensors
2026-10-11 10:56 UTC (2+ messages)
[PATCH v2 0/6] iio: adc: ade9000: add ADE9430 support
2026-10-11 10:45 UTC (4+ messages)
[PATCH] iio: accel: adxl345: update period cache after successful write
2026-10-11 10:18 UTC
[PATCH v5 0/2] Add support for AS7343 multi-spectral sensor
2026-10-11 3:12 UTC (5+ messages)
` [PATCH v5 2/2] iio: light: add AS7343 multi-spectral sensor driver
[PATCH v2 0/2] iio: adc: ti-ads112c14: add gpio support
2026-10-10 13:46 UTC (6+ messages)
` [PATCH v2 1/2] iio: adc: ti-ads112c14: parameterize GPIO register field macros
` [PATCH v2 2/2] iio: adc: ti-ads112c14: add gpio support
[PATCH 0/6] iio: adc: ltc2497: add LTC2493 support and line-frequency rejection
2026-10-10 7:05 UTC (6+ messages)
` [PATCH 1/6] dt-bindings: iio: adc: lltc,ltc2497: add LTC2493 support
` [PATCH 2/6] iio: adc: ltc2497: "
[PATCH] iio: adc: ti-ads112c14: add gpio support
2026-10-09 23:14 UTC (5+ messages)
[PATCH v2 0/2] iio: adc: ti-ads112c14: minor fixes
2026-10-09 22:24 UTC (3+ messages)
` [PATCH v2 1/2] iio: adc: ti-ads112c14: fix negative settlingtime check
` [PATCH v2 2/2] iio: adc: ti-ads112c14: fix settlingtime creep on write back
[REGRESSION] amd_sfh: accelerometer broken since 6.19 ("Event data for report 1 was too short (15 vs 14)")
2026-10-09 11:49 UTC (3+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox