Linux IIO development
 help / color / mirror / Atom feed
 messages from 2026-11-17 08:24:25 to 2026-11-18 16:42:31 UTC [more...]

[PATCH v4 0/5] Battery temperature ADC plumbing on Qualcomm platforms
 2026-11-18 16:42 UTC  (7+ messages)
` [PATCH v4 1/5] iio: adc: qcom-spmi-adc5: Add battery thermal channels
` [PATCH v4 2/5] dt-bindings: thermal: generic-adc: Document #io-channel-cells
` [PATCH v4 3/5] thermal/drivers/generic-adc: Allow probe without TZ registration
` [PATCH v4 4/5] arm64: dts: qcom: pm7250b: Define battery temperature ADC channels
` [PATCH v4 5/5] arm64: dts: qcom: sm7225-fairphone-fp4: Add battery temperature node

[PATCH] iio: magnetometer: rm3100: check TMRC in rm3100_get_samp_freq()
 2026-11-18 16:41 UTC 

[PATCH v5 0/3] iio: adc: Add Nuvoton MA35D1 EADC support
 2026-11-18 16:33 UTC  (7+ messages)
` [PATCH v5 1/3] dt-bindings: iio: adc: Fix channel property validation
` [PATCH v5 2/3] dt-bindings: iio: adc: Add Nuvoton MA35D1 EADC
` [PATCH v5 3/3] iio: adc: Add Nuvoton MA35D1 EADC driver

[PATCH] iio: light: cm32181: Add support for CM32183
 2026-11-18 15:42 UTC  (3+ messages)

[PATCH v2 00/11] iio: adc: stm32: add mdf support for stm32mp2
 2026-11-18 15:17 UTC  (12+ messages)
` [PATCH v2 01/11] dt-bindings: iio: adc: add stm32mp2 mdf filter
` [PATCH v2 02/11] iio: adc: stm32-mdf: add core registration
` [PATCH v2 03/11] iio: adc: stm32-mdf: add cck clocks provider
` [PATCH v2 04/11] iio: adc: stm32-mdf: add serial interfaces support
` [PATCH v2 05/11] iio: adc: stm32-mdf: add digital filter device support
` [PATCH v2 06/11] iio: adc: stm32-mdf: configure cic filters and sample rates
` [PATCH v2 07/11] iio: adc: stm32-mdf: add direct iio conversion support
` [PATCH v2 08/11] iio: adc: stm32-mdf: add dma buffered acquisition support
` [PATCH v2 09/11] iio: adc: stm32-mdf: add external timer trigger support
` [PATCH v2 10/11] iio: adc: stm32-mdf: add dmic audio filter support
` [PATCH v2 11/11] ASoC: stm32: add mdf dai support

[PATCH] iio: adc: ti_am335x_adc: Fix potential use-after-free on DMA unbind
 2026-11-18 14:27 UTC 

[PATCH 0/2] Support ROHM BD79111 ADC/GPIO
 2026-11-18 14:19 UTC  (3+ messages)
` [PATCH 1/2] dt-bindings: iio: Support ROHM BD79111
` [PATCH 2/2] iio: adc: rohm-bd79112: "

[PATCH v2] iio: light: bh1745: fix 16-bit register accesses
 2026-11-18 14:17 UTC  (8+ messages)

[PATCH 00/15] IIO: a bunch of llm-found fixes
 2026-11-18 14:06 UTC  (5+ messages)
` [PATCH 12/15] iio: imu: inv_mpu6050: don't disable the IRQ under lock

[PATCH v3 0/5] iio: light: gp2ap020a00f: Add VCC supply and GP2AP030A00F support
 2026-11-18 13:46 UTC  (6+ messages)
` [PATCH v3 1/5] dt-bindings: iio: light: sharp,gp2ap020a00f: Add VCC supply
` [PATCH v3 2/5] dt-bindings: iio: light: sharp,gp2ap020a00f: Add GP2AP030A00F
` [PATCH v3 3/5] iio: light: gp2ap020a00f: Enable the VCC supply
` [PATCH v3 4/5] iio: light: gp2ap020a00f: Prepare for chip variants
` [PATCH v3 5/5] iio: light: gp2ap020a00f: Add GP2AP030A00F support

[PATCH v2 0/3] dma-buf: dma-fence: Remove dma_fence_init64()
 2026-11-18 13:45 UTC  (4+ messages)
` [PATCH v2 1/3] dma-buf: dma-fence: Add flags parameter to dma_fence_init()
` [PATCH v2 2/3] dma-buf: Port users of dma_fence_init64()
` [PATCH v2 3/3] dma-buf: dma-fence: Remove dma_fence_init64()

[PATCH v7 0/7] iio: imu: Add support for the ADI ADIS16607
 2026-11-18 13:17 UTC  (8+ messages)
` [PATCH v7 1/7] iio: imu: adis: Fix custom reset dispatch in adislib
` [PATCH v7 2/7] iio: imu: adis: Add optional self_test callback
` [PATCH v7 3/7] iio: imu: adis: Add optional init callback
` [PATCH v7 4/7] dt-bindings: iio: imu: Add bindings for ADI ADIS16607
` [PATCH v7 5/7] iio: imu: Add driver for the "
` [PATCH v7 6/7] iio: imu: adis16607: Add external clock sync support
` [PATCH v7 7/7] iio: imu: adis16607: Add calibration bias support for gyro/accel

[PATCH v3 0/2] Semtech SX9xxx: add a reviewer entry and binding maintainer
 2026-11-18 13:14 UTC  (10+ messages)
` [PATCH v3 1/2] dt-bindings: iio: proximity: semtech: add myself as maintainer
` [PATCH v3 2/2] MAINTAINERS: add a reviewer entry for the Semtech SX9xxx proximity drivers

[PATCH v1 0/5] Add support for ADA4355
 2026-11-18 13:04 UTC  (6+ messages)
` [PATCH v1 1/5] iio: backend: Add calibration source interface
` [PATCH v1 2/5] dt-bindings: iio: adc: Add AXI ADA4355 IP CORE
` [PATCH v1 3/5] iio: adc: adi-axi-adc: Support AXI ADA4355 IP core
` [PATCH v1 4/5] dt-bindings: iio: adc: Add ADA4355
` [PATCH v1 5/5] iio: adc: Add support for ADA4355 and similar ADCs

[PATCH] MAINTAINERS: add a reviewer entry for the Semtech SX9xxx proximity drivers
 2026-11-18 12:39 UTC  (3+ messages)

[PATCH RFC] regmap: kunit: add tests for values wider than val_bits
 2026-11-18 11:30 UTC  (3+ messages)

[PATCH v3] iio: light: bh1745: fix 16-bit register accesses
 2026-11-18 10:45 UTC 

[PATCH v2] staging: iio: adc: ad7816: use dev_err_probe() for GPIO lookups
 2026-11-18 10:10 UTC  (2+ messages)

[PATCH 0/6] iio: proximity: sx93xx: fix raw reads, thresholds, hysteresis and gain
 2026-11-18 10:06 UTC  (13+ messages)
` [PATCH 2/6] iio: proximity: sx9324: fix proximity threshold writes
` [PATCH 3/6] iio: proximity: sx9324: reject negative hysteresis values
` [PATCH 5/6] iio: proximity: sx9360: fix proximity threshold writes
` [PATCH 6/6] iio: proximity: sx9360: reject negative hysteresis values

[PATCH v2 0/4] iio: light: stk3310: stk3337 support + vdd supply
 2026-11-18 10:03 UTC  (7+ messages)
` [PATCH v2 1/4] dt-bindings: iio: light: stk33xx: add power supply support
` [PATCH v2 2/4] dt-bindings: iio: light: stk33xx: add stk3337
` [PATCH v2 3/4] iio: light: stk3310: add vdd regulator support
` [PATCH v2 4/4] iio: light: stk3310: add stk3337 support

[PATCH v1 0/3] iio: adc: Provide mult_fract() and make use of it
 2026-11-18  9:56 UTC  (8+ messages)
` [PATCH v1 1/3] math.h: Add mult_fract() that takes struct __Txx_fract as argument
` [PATCH v1 2/3] iio: adc: ad4030: Switch to use mult_fract() helper
` [PATCH v1 3/3] iio: adc: ltc2378: "

[PATCH v1 0/2] iio: proximity: add Imagis ISG5320A (Samsung Galaxy XCover5)
 2026-11-18  9:53 UTC  (9+ messages)
` [PATCH v2 1/2] dt-bindings: iio: proximity: add Imagis ISG5320A
  ` [PATCH v2 2/2] iio: proximity: add Imagis ISG5320A SAR sensor driver
` [PATCH v3 0/2] iio: proximity: add Imagis ISG5320A (Samsung Galaxy XCover5)
  ` [PATCH v3 1/2] dt-bindings: iio: proximity: add Imagis ISG5320A
  ` [PATCH v3 2/2] iio: proximity: add Imagis ISG5320A SAR sensor driver

[PATCH v4 1/4] dt-bindings: mfd: mxs-lradc: Fix interrupt order
 2026-11-18  8:56 UTC  (3+ messages)
` [PATCH v4 2/4] iio: adc: mxs-lradc: Fix trigger use-after-free on removal

[PATCH v5 00/16] iio: adc: xilinx-xadc: Add I2C interface support for System Management Wizard
 2026-11-18  8:52 UTC  (5+ messages)
` [PATCH v5 02/16] iio: adc: xilinx-xadc: Fix coding style issues
` [PATCH v5 04/16] iio: adc: xilinx-xadc: Drop unnecessary masking and dead code

[PATCH 00/35] iio: closing default trigger handling leaks
 2026-11-18  8:46 UTC  (4+ messages)
` [PATCH 06/35] iio: adc: ad7768-1: use default_trigger

[PATCH v1 1/1] iio: afe: rescale: Don't use ULL(1) << x instead of BIT(x)
 2026-11-18  8:28 UTC  (2+ messages)

[PATCH v1 1/1] iio: light: opt4060: Remove dead code
 2026-11-18  8:24 UTC  (2+ messages)

[PATCH v2 1/1] iio: dac: ad5766: Convert GENMASK() to use static parameters
 2026-11-18  7:36 UTC  (2+ messages)

[PATCH v3 0/2] iio: light: adux1020: guard() conversion and follow-up cleanup
 2026-11-18  7:29 UTC  (3+ messages)
` [PATCH v3 1/2] iio: light: adux1020: use guard() to simplify lock handling
` [PATCH v3 2/2] iio: light: adux1020: return early on unsupported channel types

[PATCH 0/5] iio: potentiometer: mcp4018: Add Analog Devices AD5246
 2026-11-17 20:04 UTC  (13+ messages)
` [PATCH 2/5] iio: potentiometer: mcp4018: Report the available wiper positions
` [PATCH 3/5] dt-bindings: iio: potentiometer: Add Analog Devices AD5246
` [PATCH 4/5] iio: potentiometer: mcp4018: Turn on the vdd supply
` [PATCH 5/5] iio: potentiometer: mcp4018: Add Analog Devices AD5246

[PATCH v2 0/2] iio: light: adux1020: guard() conversion and follow-up cleanup
 2026-11-17 19:06 UTC  (3+ messages)
` [PATCH v2 2/2] iio: light: adux1020: return early on unsupported channel types

[PATCH v1 1/1] iio: proximity: sx9324: Convert GENMASK() to use static parameters
 2026-11-17 19:01 UTC  (2+ messages)

[PATCH v2 0/3] iio: adc: mt6359-auxadc: various fixes
 2026-11-17 17:56 UTC  (4+ messages)
` [PATCH v2 1/3] iio: adc: mt6359-auxadc: correct channel types to IIO_VOLTAGE
` [PATCH v2 2/3] iio: adc: mt6359-auxadc: mask conversion ready bit in mt6358_read_imp
` [PATCH v2 3/3] iio: adc: mt6359-auxadc: fix scale calculation

[PATCH v5 0/2] iio: adc: add mt6397 PMIC AUXADC support
 2026-11-17 17:35 UTC  (6+ messages)
` [PATCH v5 2/2] iio: adc: mt6397-auxadc: add mt6397 PMIC AUXADC driver

[PATCH v3 00/14] MTU3 counter fixes and improvements
 2026-11-17 17:10 UTC  (26+ messages)
` [PATCH v3 01/14] counter: rz-mtu3-cnt: do not assign struct rz_mtu3_channel::dev
` [PATCH v3 02/14] counter: rz-mtu3-cnt: remove manual runtime PM handling
` [PATCH v3 03/14] counter: rz-mtu3-cnt: use device-managed pm_runtime_enable()
` [PATCH v3 04/14] counter: rz-mtu3-cnt: read enable value from cache
` [PATCH v3 05/14] counter: rz-mtu3-cnt: disable channel before releasing
` [PATCH v3 06/14] counter: rz-mtu3-cnt: unify ceiling values
` [PATCH v3 07/14] counter: rz-mtu3-cnt: cache "
` [PATCH v3 08/14] counter: rz-mtu3-cnt: cache count values
` [PATCH v3 09/14] counter: rz-mtu3-cnt: cache function values
` [PATCH v3 10/14] counter: rz-mtu3-cnt: cache external input phase clock value
` [PATCH v3 11/14] counter: rz-mtu3-cnt: cache direction values
` [PATCH v3 12/14] counter: rz-mtu3-cnt: keep cascade_counts_enable in sync with usage
` [PATCH v3 13/14] counter: rz-mtu3-cnt: drop conditional locks
` [PATCH v3 14/14] counter: rz-mtu3-cnt: use pm_runtime_resume_and_get()

[PATCH v4 0/3] iio: adc: at91_adc: fix trigger NULL deref and convert to devm_*
 2026-11-17 16:57 UTC  (8+ messages)
` [PATCH v4 1/3] iio: adc: at91_adc: fix NULL pointer dereference on trigger remove
` [PATCH v4 2/3] iio: adc: at91_adc: use local struct device pointer in probe
` [PATCH v4 3/3] iio: adc: at91_adc: convert to device-managed resources

[PATCH v1 1/1] iio: dac: ad5766: Convert GENMASK() to use static parameters
 2026-11-17 16:05 UTC 

[PATCH v2 0/2] Semtech SX9xxx: add a reviewer entry and binding maintainer
 2026-11-17 14:10 UTC  (4+ messages)
` [PATCH v2 1/2] dt-bindings: iio: proximity: semtech: add myself as maintainer
` [PATCH v2 2/2] MAINTAINERS: add a reviewer entry for the Semtech SX9xxx proximity drivers

[PATCH v2] iio: pressure: dps310: don't wait for new temperature in trigger handler
 2026-11-17 11:07 UTC  (10+ messages)

[PATCH] iio: adc: max1027: complete the EOC wait when using an external trigger
 2026-11-17 10:52 UTC  (2+ messages)

[PATCH] iio: light: bh1745: fix 16-bit register accesses
 2026-11-17 10:51 UTC  (4+ messages)

[PATCH 0/3] iio: pressure: dps310: add Goermicro SPL07-003
 2026-11-17 10:08 UTC  (7+ messages)
` [PATCH 1/3] dt-bindings: vendor-prefixes: Add Goermicro
` [PATCH 2/3] dt-bindings: iio: pressure: infineon,dps310: Add Goermicro SPL07-003
` [PATCH 3/3] iio: pressure: dps310: add Goermicro SPL07-003 support


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox