Re: [PATCH v4 04/11] iio: accel: adxl313: add function to enable measurement

[Lothar Rubusch <l.rubusch@gmail.com>]

On Sun, Jun 8, 2025 at 5:27 PM Jonathan Cameron <jic23@kernel.org> wrote:
>
> On Sun,  1 Jun 2025 17:21:32 +0000
> Lothar Rubusch <l.rubusch@gmail.com> wrote:
>
> > Rework controlling measurement and standby of the sensor. Therefore,
> > replace writing the register directly by encapsulating this and dealing
> > with the return value in a separte function to enable and disable
> > measurement. This will help to avoid redundant code in all locations
> > where the sensor configuration needs to be adjusted, thus measurement will
> > be set to standby, in follow up patches.
> >
> > Further, reduce the control mask to only the measurement bit. The sleep bit
> > actually controls a different behavior (not just putting the sensor to
> > standby for configuration, but turning it into sleep mode) and it is not
> > used so far. In consequence, there is no need to cover sleep bit and
> > measurement with the same mask.
> >
> > Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
> This is a good bit to have as a precursor patch (as you have done)
> because it is refactoring the existing code.  It doesn't stand on it's
> own though given for now there is only one caller, so I won't pick it up
> until the patch that uses it is ready to go.
>

So, I'll leave this patch (in case I might refrase the commit message,
and I hope this is ok). I'm going to merge [v4 02/11] [v4 05/11] and
[v4 06/11] for a v5. Let me know if I got this wrong.

> Jonathan
>
> > ---
> >  drivers/iio/accel/adxl313.h      |  3 +--
> >  drivers/iio/accel/adxl313_core.c | 10 +++++++---
> >  2 files changed, 8 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/iio/accel/adxl313.h b/drivers/iio/accel/adxl313.h
> > index fc937bdf83b6..9bf2facdbf87 100644
> > --- a/drivers/iio/accel/adxl313.h
> > +++ b/drivers/iio/accel/adxl313.h
> > @@ -36,8 +36,7 @@
> >  #define ADXL313_RATE_MSK             GENMASK(3, 0)
> >  #define ADXL313_RATE_BASE            6
> >
> > -#define ADXL313_POWER_CTL_MSK                GENMASK(3, 2)
> > -#define ADXL313_MEASUREMENT_MODE     BIT(3)
> > +#define ADXL313_POWER_CTL_MSK                BIT(3)
> >
> >  #define ADXL313_RANGE_MSK            GENMASK(1, 0)
> >  #define ADXL313_RANGE_MAX            3
> > diff --git a/drivers/iio/accel/adxl313_core.c b/drivers/iio/accel/adxl313_core.c
> > index 0c893c286017..6170c9daa30f 100644
> > --- a/drivers/iio/accel/adxl313_core.c
> > +++ b/drivers/iio/accel/adxl313_core.c
> > @@ -63,6 +63,12 @@ bool adxl313_is_volatile_reg(struct device *dev, unsigned int reg)
> >  }
> >  EXPORT_SYMBOL_NS_GPL(adxl313_is_volatile_reg, "IIO_ADXL313");
> >
> > +static int adxl313_set_measure_en(struct adxl313_data *data, bool en)
> > +{
> > +     return regmap_assign_bits(data->regmap, ADXL313_REG_POWER_CTL,
> > +                               ADXL313_POWER_CTL_MSK, en);
> > +}
> > +
> >  static int adxl312_check_id(struct device *dev,
> >                           struct adxl313_data *data)
> >  {
> > @@ -410,9 +416,7 @@ static int adxl313_setup(struct device *dev, struct adxl313_data *data,
> >       }
> >
> >       /* Enables measurement mode */
> > -     return regmap_update_bits(data->regmap, ADXL313_REG_POWER_CTL,
> > -                               ADXL313_POWER_CTL_MSK,
> > -                               ADXL313_MEASUREMENT_MODE);
> > +     return adxl313_set_measure_en(data, true);
> >  }
> >
> >  /**
>