Re: [PATCH 00/17] iio:adc:ad7280a Cleanup and proposed staging graduation.

[Marcelo Schmitt <marcelo.schmitt1@gmail.com>]

Hey Jonathan,

On 06/14, Jonathan Cameron wrote:
> From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> 
> Hi All,
> 
> This one proved an interesting diversion.
> 
> Work done against a somewhat hacked up QEMU emulation of 3 daisy chained
> ad7280a devices (18 channels).  Note that the emulation isn't complete
> but does do chaining, CRC, and readout of channels etc in a fashion that
> worked with the original driver (up to the bug in patch 1) and continues
> to work with the updated version. I've not intention to upstream the
> emulation (as would need to make it more completed and flexible), but
> happy to share it with anyone who is interested.

I'm interested in seeing your device emulation with QEMU.
I was looking at the ad7150 emulation you shared earlier this year but had
some trouble getting the i2c slave created.

Being able to see it running, I may feel more confident to provide a review
for this set :)

Regards,

Marcelo
> 
> I briefly flirted with posting a patch to just drop the driver entirely,
> but the part is still available and it looked like fun + isn't going
> to greatly impact maintainability of the subsystem long term so is low
> cost even if it goes obsolete sometime soonish.
> 
> There are lots of things we could do after this set to improved the driver
> and make things more flexible, but it should basically 'just work'
> 
> Anyhow, as normal for staging graduations, last patch has rename detection
> turned off so that people can easily see what I am proposing we move
> out of staging.
> 
> Jonathan Cameron (17):
>   staging:iio:adc:ad7280a: Fix handing of device address bit reversing.
>   staging:iio:adc:ad7280a: Register define cleanup.
>   staging:iio:adc:ad7280a: rename _read() to _read_reg()
>   staging:iio:adc:ad7280a: Split buff[2] into tx and rx parts
>   staging:iio:adc:ad7280a: Use bitfield ops to managed fields in
>     transfers.
>   staging:iio:adc:ad7280a: Switch to standard event control
>   staging:iio:adc:ad7280a: Standardize extended ABI naming
>   staging:iio:adc:ad7280a: Drop unused timestamp channel.
>   staging:iio:adc:ad7280a: Trivial comment formatting cleanup
>   staging:iio:adc:ad7280a: Make oversampling_ratio a runtime control
>   staging:iio:adc:ad7280a: Cleanup includes
>   staging:iio:ad7280a: Reflect optionality of irq in ABI
>   staging:iio:adc:ad7280a: Use a local dev pointer to avoid &spi->dev
>   staging:iio:adc:ad7280a: Use device properties to replace platform
>     data.
>   dt-bindings:iio:adc:ad7280a: Add binding
>   iio:adc:ad7280a: Document ABI for cell balance switches
>   iio:adc:ad7280a: Move out of staging
> 
>  .../ABI/testing/sysfs-bus-iio-adc-ad7280a     |   14 +
>  .../bindings/iio/adc/adi,ad7280a.yaml         |   87 ++
>  drivers/iio/adc/Kconfig                       |   11 +
>  drivers/iio/adc/Makefile                      |    1 +
>  drivers/iio/adc/ad7280a.c                     | 1116 +++++++++++++++++
>  drivers/staging/iio/adc/Kconfig               |   11 -
>  drivers/staging/iio/adc/Makefile              |    1 -
>  drivers/staging/iio/adc/ad7280a.c             | 1044 ---------------
>  drivers/staging/iio/adc/ad7280a.h             |   37 -
>  9 files changed, 1229 insertions(+), 1093 deletions(-)
>  create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-adc-ad7280a
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml
>  create mode 100644 drivers/iio/adc/ad7280a.c
>  delete mode 100644 drivers/staging/iio/adc/ad7280a.c
>  delete mode 100644 drivers/staging/iio/adc/ad7280a.h
> 
> -- 
> 2.32.0
>