From: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
To: Jonathan Cameron <jic23@kernel.org>
Cc: Lorenzo Bianconi <lorenzo@kernel.org>, linux-iio@vger.kernel.org
Subject: Re: [PATCH] iio: imu: st_lsm6dsx: move max_fifo_size in st_lsm6dsx_fifo_ops
Date: Sun, 26 Sep 2021 14:58:45 +0200 [thread overview]
Message-ID: <YVBuhVU/fcJjgTU6@lore-desk> (raw)
In-Reply-To: <20210926125916.6540ba7a@jic23-huawei>
[-- Attachment #1: Type: text/plain, Size: 5993 bytes --]
> On Thu, 23 Sep 2021 11:08:24 +0200
> Lorenzo Bianconi <lorenzo@kernel.org> wrote:
>
> > This patch does not introduce any logic change, just small code
> > rearrangement.
> Hi Lorenzo,
>
> Why? I can make an educated guess that it is to put all the fifo related stuff
> in one place, but you probably need to state that in the patch description.
yes, it seems to me it is logically correct to have fifo configuration in
fifo_ops. I will post v2 adding this in the commit log.
Regards,
Lorenzo
>
> Thanks,
>
> Jonathan
>
> >
> > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> > ---
> > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 4 ++--
> > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 16 +++++++++-------
> > 2 files changed, 11 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> > index 5ef55763a6cc..6ac4eac36458 100644
> > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> > @@ -143,6 +143,7 @@ struct st_lsm6dsx_fs_table_entry {
> > * @read_fifo: Read FIFO callback.
> > * @fifo_th: FIFO threshold register info (addr + mask).
> > * @fifo_diff: FIFO diff status register info (addr + mask).
> > + * @max_size: Sensor max fifo length in FIFO words.
> > * @th_wl: FIFO threshold word length.
> > */
> > struct st_lsm6dsx_fifo_ops {
> > @@ -156,6 +157,7 @@ struct st_lsm6dsx_fifo_ops {
> > u8 addr;
> > u16 mask;
> > } fifo_diff;
> > + u16 max_size;
> > u8 th_wl;
> > };
> >
> > @@ -271,7 +273,6 @@ struct st_lsm6dsx_ext_dev_settings {
> > * @reset: register address for reset.
> > * @boot: register address for boot.
> > * @bdu: register address for Block Data Update.
> > - * @max_fifo_size: Sensor max fifo length in FIFO words.
> > * @id: List of hw id/device name supported by the driver configuration.
> > * @channels: IIO channels supported by the device.
> > * @irq_config: interrupts related registers.
> > @@ -288,7 +289,6 @@ struct st_lsm6dsx_settings {
> > struct st_lsm6dsx_reg reset;
> > struct st_lsm6dsx_reg boot;
> > struct st_lsm6dsx_reg bdu;
> > - u16 max_fifo_size;
> > struct {
> > enum st_lsm6dsx_hw_id hw_id;
> > const char *name;
> > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > index db45f1fc0b81..0f54df85134a 100644
> > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > @@ -102,7 +102,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> > .addr = 0x22,
> > .mask = BIT(6),
> > },
> > - .max_fifo_size = 32,
> > .id = {
> > {
> > .hw_id = ST_LSM9DS1_ID,
> > @@ -194,6 +193,9 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> > .mask = BIT(4),
> > },
> > },
> > + .fifo_ops = {
> > + .max_size = 32,
> > + },
> > },
> > {
> > .reset = {
> > @@ -208,7 +210,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> > .addr = 0x12,
> > .mask = BIT(6),
> > },
> > - .max_fifo_size = 1365,
> > .id = {
> > {
> > .hw_id = ST_LSM6DS3_ID,
> > @@ -329,6 +330,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> > .addr = 0x3a,
> > .mask = GENMASK(11, 0),
> > },
> > + .max_size = 1365,
> > .th_wl = 3, /* 1LSB = 2B */
> > },
> > .ts_settings = {
> > @@ -374,7 +376,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> > .addr = 0x12,
> > .mask = BIT(6),
> > },
> > - .max_fifo_size = 682,
> > .id = {
> > {
> > .hw_id = ST_LSM6DS3H_ID,
> > @@ -495,6 +496,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> > .addr = 0x3a,
> > .mask = GENMASK(11, 0),
> > },
> > + .max_size = 682,
> > .th_wl = 3, /* 1LSB = 2B */
> > },
> > .ts_settings = {
> > @@ -540,7 +542,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> > .addr = 0x12,
> > .mask = BIT(6),
> > },
> > - .max_fifo_size = 682,
> > .id = {
> > {
> > .hw_id = ST_LSM6DSL_ID,
> > @@ -677,6 +678,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> > .addr = 0x3a,
> > .mask = GENMASK(10, 0),
> > },
> > + .max_size = 682,
> > .th_wl = 3, /* 1LSB = 2B */
> > },
> > .ts_settings = {
> > @@ -759,7 +761,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> > .addr = 0x12,
> > .mask = BIT(6),
> > },
> > - .max_fifo_size = 512,
> > .id = {
> > {
> > .hw_id = ST_LSM6DSR_ID,
> > @@ -910,6 +911,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> > .addr = 0x3a,
> > .mask = GENMASK(9, 0),
> > },
> > + .max_size = 512,
> > .th_wl = 1,
> > },
> > .ts_settings = {
> > @@ -984,7 +986,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> > .addr = 0x12,
> > .mask = BIT(6),
> > },
> > - .max_fifo_size = 512,
> > .id = {
> > {
> > .hw_id = ST_ASM330LHH_ID,
> > @@ -1119,6 +1120,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> > .addr = 0x3a,
> > .mask = GENMASK(9, 0),
> > },
> > + .max_size = 512,
> > .th_wl = 1,
> > },
> > .ts_settings = {
> > @@ -1603,7 +1605,7 @@ int st_lsm6dsx_set_watermark(struct iio_dev *iio_dev, unsigned int val)
> > struct st_lsm6dsx_hw *hw = sensor->hw;
> > int err;
> >
> > - if (val < 1 || val > hw->settings->max_fifo_size)
> > + if (val < 1 || val > hw->settings->fifo_ops.max_size)
> > return -EINVAL;
> >
> > mutex_lock(&hw->conf_lock);
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
prev parent reply other threads:[~2021-09-26 12:58 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-23 9:08 [PATCH] iio: imu: st_lsm6dsx: move max_fifo_size in st_lsm6dsx_fifo_ops Lorenzo Bianconi
2021-09-26 11:59 ` Jonathan Cameron
2021-09-26 12:58 ` Lorenzo Bianconi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YVBuhVU/fcJjgTU6@lore-desk \
--to=lorenzo.bianconi@redhat.com \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=lorenzo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox