From: William Breathitt Gray <vilhelm.gray@gmail.com>
To: David Lechner <david@lechnology.com>
Cc: linux-iio@vger.kernel.org,
Robert Nelson <robertcnelson@gmail.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/8] counter/ti-eqep: add support for direction
Date: Mon, 25 Oct 2021 16:29:55 +0900 [thread overview]
Message-ID: <YXZc8wdOuf0/6rwQ@shinobu> (raw)
In-Reply-To: <20211017013343.3385923-3-david@lechnology.com>
[-- Attachment #1: Type: text/plain, Size: 3694 bytes --]
On Sat, Oct 16, 2021 at 08:33:37PM -0500, David Lechner wrote:
> This adds support for direction to the TI eQEP counter driver. It adds
> both a direction attribute to sysfs and a direction change event to
> the chrdev. The direction change event type is new public API.
>
> Signed-off-by: David Lechner <david@lechnology.com>
Just one minor comment below regarding the IRQ handler; the rest of the
patch is fine.
> ---
> drivers/counter/ti-eqep.c | 33 +++++++++++++++++++++++++++++++++
> include/uapi/linux/counter.h | 2 ++
> 2 files changed, 35 insertions(+)
>
> diff --git a/drivers/counter/ti-eqep.c b/drivers/counter/ti-eqep.c
> index b7c79435e127..9881e5115da6 100644
> --- a/drivers/counter/ti-eqep.c
> +++ b/drivers/counter/ti-eqep.c
> @@ -106,6 +106,15 @@
> #define QCLR_PCE BIT(1)
> #define QCLR_INT BIT(0)
>
> +#define QEPSTS_UPEVNT BIT(7)
> +#define QEPSTS_FDF BIT(6)
> +#define QEPSTS_QDF BIT(5)
> +#define QEPSTS_QDLF BIT(4)
> +#define QEPSTS_COEF BIT(3)
> +#define QEPSTS_CDEF BIT(2)
> +#define QEPSTS_FIMF BIT(1)
> +#define QEPSTS_PCEF BIT(0)
> +
> /* EQEP Inputs */
> enum {
> TI_EQEP_SIGNAL_QEPA, /* QEPA/XCLK */
> @@ -286,6 +295,9 @@ static int ti_eqep_events_configure(struct counter_device *counter)
> case COUNTER_EVENT_UNDERFLOW:
> qeint |= QEINT_PCU;
> break;
> + case COUNTER_EVENT_DIRECTION_CHANGE:
> + qeint |= QEINT_QDC;
> + break;
> }
> }
>
> @@ -298,6 +310,7 @@ static int ti_eqep_watch_validate(struct counter_device *counter,
> switch (watch->event) {
> case COUNTER_EVENT_OVERFLOW:
> case COUNTER_EVENT_UNDERFLOW:
> + case COUNTER_EVENT_DIRECTION_CHANGE:
> return 0;
> default:
> return -EINVAL;
> @@ -371,11 +384,27 @@ static int ti_eqep_position_enable_write(struct counter_device *counter,
> return 0;
> }
>
> +static int ti_eqep_direction_read(struct counter_device *counter,
> + struct counter_count *count,
> + enum counter_count_direction *direction)
> +{
> + struct ti_eqep_cnt *priv = counter->priv;
> + u32 qepsts;
> +
> + regmap_read(priv->regmap16, QEPSTS, &qepsts);
> +
> + *direction = (qepsts & QEPSTS_QDF) ? COUNTER_COUNT_DIRECTION_FORWARD
> + : COUNTER_COUNT_DIRECTION_BACKWARD;
> +
> + return 0;
> +}
> +
> static struct counter_comp ti_eqep_position_ext[] = {
> COUNTER_COMP_CEILING(ti_eqep_position_ceiling_read,
> ti_eqep_position_ceiling_write),
> COUNTER_COMP_ENABLE(ti_eqep_position_enable_read,
> ti_eqep_position_enable_write),
> + COUNTER_COMP_DIRECTION(ti_eqep_direction_read),
> };
>
> static struct counter_signal ti_eqep_signals[] = {
> @@ -442,6 +471,10 @@ static irqreturn_t ti_eqep_irq_handler(int irq, void *dev_id)
> if (qflg & QFLG_PCU)
> counter_push_event(counter, COUNTER_EVENT_UNDERFLOW, 0);
>
> + if (qflg & QFLG_QDC)
> + counter_push_event(counter, COUNTER_EVENT_DIRECTION_CHANGE, 0);
> +
> +
> regmap_set_bits(priv->regmap16, QCLR, ~0);
As mentioned in the previous patch comments, you should try if possible
to clear only the interrupt flags for the events that you're actually
handling here.
William Breathitt Gray
>
> return IRQ_HANDLED;
> diff --git a/include/uapi/linux/counter.h b/include/uapi/linux/counter.h
> index d0aa95aeff7b..36dd3b474d09 100644
> --- a/include/uapi/linux/counter.h
> +++ b/include/uapi/linux/counter.h
> @@ -61,6 +61,8 @@ enum counter_event_type {
> COUNTER_EVENT_THRESHOLD,
> /* Index signal detected */
> COUNTER_EVENT_INDEX,
> + /* Direction change detected */
> + COUNTER_EVENT_DIRECTION_CHANGE,
> };
>
> /**
> --
> 2.25.1
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2021-10-25 7:30 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-17 1:33 [PATCH 0/8] counter: ti-eqep: implement features for speed measurement David Lechner
2021-10-17 1:33 ` [PATCH 1/8] counter/ti-eqep: implement over/underflow events David Lechner
2021-10-17 11:10 ` Jonathan Cameron
2021-10-25 7:13 ` William Breathitt Gray
2021-10-27 15:23 ` David Lechner
2021-10-28 6:41 ` William Breathitt Gray
2021-10-17 1:33 ` [PATCH 2/8] counter/ti-eqep: add support for direction David Lechner
2021-10-17 11:11 ` Jonathan Cameron
2021-10-25 7:29 ` William Breathitt Gray [this message]
2021-10-17 1:33 ` [PATCH 3/8] counter/ti-eqep: add support for unit timer David Lechner
2021-10-17 11:20 ` Jonathan Cameron
2021-10-25 8:48 ` William Breathitt Gray
2021-10-27 15:28 ` David Lechner
2021-10-28 7:48 ` William Breathitt Gray
2021-10-28 13:42 ` David Lechner
2021-10-30 8:35 ` William Breathitt Gray
2021-10-17 1:33 ` [PATCH 4/8] docs: counter: add unit timer sysfs attributes David Lechner
2021-10-17 11:23 ` Jonathan Cameron
2021-10-27 6:46 ` William Breathitt Gray
2021-10-27 15:30 ` David Lechner
2021-10-28 7:59 ` William Breathitt Gray
2021-10-30 16:40 ` David Lechner
2021-11-01 4:08 ` William Breathitt Gray
2021-11-01 5:27 ` William Breathitt Gray
2021-10-17 1:33 ` [PATCH 5/8] counter/ti-eqep: add support for latched position David Lechner
2021-10-27 7:44 ` William Breathitt Gray
2021-10-27 15:40 ` David Lechner
2021-10-28 8:12 ` William Breathitt Gray
2021-10-17 1:33 ` [PATCH 6/8] docs: counter: add latch_mode and latched_count sysfs attributes David Lechner
2021-10-17 11:26 ` Jonathan Cameron
2021-10-27 7:54 ` William Breathitt Gray
2021-10-27 17:00 ` David Lechner
2021-10-30 1:32 ` William Breathitt Gray
2021-10-30 14:39 ` Jonathan Cameron
2021-11-01 5:11 ` William Breathitt Gray
2021-10-17 1:33 ` [PATCH 7/8] counter/ti-eqep: add support for edge capture unit David Lechner
2021-10-17 11:29 ` Jonathan Cameron
2021-10-27 8:23 ` William Breathitt Gray
2021-10-27 17:28 ` David Lechner
2021-10-17 1:33 ` [PATCH 8/8] docs: counter: add edge_capture_unit_* attributes David Lechner
2021-10-27 8:26 ` William Breathitt Gray
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YXZc8wdOuf0/6rwQ@shinobu \
--to=vilhelm.gray@gmail.com \
--cc=david@lechnology.com \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robertcnelson@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox