linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sam Winchenbach <sam.winchenbach@framepointer.org>
To: Jonathan Cameron <jic23@kernel.org>
Cc: linux-kernel@vger.kernel.org, lars@metafoo.de,
	Michael.Hennerich@analog.com, antoniu.miclaus@analog.com,
	robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
	linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	bpellegrino@arka.org
Subject: Re: [PATCH v6 6/6] iio: filter: admv8818: Support frequencies >= 2^32
Date: Wed, 12 Mar 2025 08:16:00 -0400	[thread overview]
Message-ID: <Z9F7AJTCtFRIPHpw@65YTFL3.secure.tethers.com> (raw)
In-Reply-To: <20250308140143.411caf7b@jic23-huawei>

On Sat, Mar 08, 2025 at 02:01:43PM +0000, Jonathan Cameron wrote:
> On Fri,  7 Mar 2025 10:02:16 -0500
> Sam Winchenbach <sam.winchenbach@framepointer.org> wrote:
> 
> > From: Brian Pellegrino <bpellegrino@arka.org>
> > 
> > This patch allows writing u64 values to the ADMV8818's high and low-pass
> > filter frequencies. It includes the following changes:
> > 
> > - Rejects negative frequencies in admv8818_write_raw.
> > - Adds a write_raw_get_fmt function to admv8818's iio_info, returning
> >   IIO_VAL_INT_64 for the high and low-pass filter 3dB frequency channels.
> > 
> > Fixes: f34fe888ad05 ("iio:filter:admv8818: add support for ADMV8818")
> > Signed-off-by: Brian Pellegrino <bpellegrino@arka.org>
> > Signed-off-by: Sam Winchenbach <sam.winchenbach@framepointer.org>
> I only have that minor comment on patch 5.  If nothing else comes up
> and the dt binding ack comes in I may just tidy that up whilst applying.
> 

Sounds good. If given the opportunity I would like to submit
the patchset once more; I would like to use my work email
for author and signoff, and use the framepointer address
as an envelope. If I do this, I can update patch 5 as noted.
Would that be ok?

Thanks,
-Sam

> > ---
> >  drivers/iio/filter/admv8818.c | 17 +++++++++++++++++
> >  1 file changed, 17 insertions(+)
> > 
> > diff --git a/drivers/iio/filter/admv8818.c b/drivers/iio/filter/admv8818.c
> > index e9602bfd4af7..9785533d0cdd 100644
> > --- a/drivers/iio/filter/admv8818.c
> > +++ b/drivers/iio/filter/admv8818.c
> > @@ -402,6 +402,19 @@ static int admv8818_read_lpf_freq(struct admv8818_state *st, u64 *lpf_freq)
> >  	return ret;
> >  }
> >  
> > +static int admv8818_write_raw_get_fmt(struct iio_dev *indio_dev,
> > +								struct iio_chan_spec const *chan,
> > +								long mask)
> > +{
> > +	switch (mask) {
> > +	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
> > +	case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY:
> > +		return IIO_VAL_INT_64;
> > +	default:
> > +		return -EINVAL;
> > +	}
> > +}
> > +
> >  static int admv8818_write_raw(struct iio_dev *indio_dev,
> >  			      struct iio_chan_spec const *chan,
> >  			      int val, int val2, long info)
> > @@ -410,6 +423,9 @@ static int admv8818_write_raw(struct iio_dev *indio_dev,
> >  
> >  	u64 freq = ((u64)val2 << 32 | (u32)val);
> >  
> > +	if ((s64)freq < 0)
> > +		return -EINVAL;
> > +
> >  	switch (info) {
> >  	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
> >  		return admv8818_lpf_select(st, freq);
> > @@ -571,6 +587,7 @@ static int admv8818_set_mode(struct iio_dev *indio_dev,
> >  
> >  static const struct iio_info admv8818_info = {
> >  	.write_raw = admv8818_write_raw,
> > +	.write_raw_get_fmt = admv8818_write_raw_get_fmt,
> >  	.read_raw = admv8818_read_raw,
> >  	.debugfs_reg_access = &admv8818_reg_access,
> >  };
> 

  reply	other threads:[~2025-03-12 12:16 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-07 15:02 [PATCH v6 1/6] dt-bindings: iio: filter: Add lpf/hpf freq margins Sam Winchenbach
2025-03-07 15:02 ` [PATCH v6 2/6] iio: filter: admv8818: fix band 4, state 15 Sam Winchenbach
2025-03-07 15:02 ` [PATCH v6 3/6] iio: filter: admv8818: fix integer overflow Sam Winchenbach
2025-03-07 15:02 ` [PATCH v6 4/6] iio: filter: admv8818: fix range calculation Sam Winchenbach
2025-03-08 14:03   ` Jonathan Cameron
2025-03-07 15:02 ` [PATCH v6 5/6] driver core: Add support for writing 64 bit attrs Sam Winchenbach
2025-03-08 14:00   ` Jonathan Cameron
2025-03-07 15:02 ` [PATCH v6 6/6] iio: filter: admv8818: Support frequencies >= 2^32 Sam Winchenbach
2025-03-08 14:01   ` Jonathan Cameron
2025-03-12 12:16     ` Sam Winchenbach [this message]
2025-03-15 18:26       ` Jonathan Cameron
2025-03-16 13:54         ` Sam Winchenbach
2025-03-10  9:22 ` [PATCH v6 1/6] dt-bindings: iio: filter: Add lpf/hpf freq margins Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Z9F7AJTCtFRIPHpw@65YTFL3.secure.tethers.com \
    --to=sam.winchenbach@framepointer.org \
    --cc=Michael.Hennerich@analog.com \
    --cc=antoniu.miclaus@analog.com \
    --cc=bpellegrino@arka.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).