Re: st_lsm6dsx minor issue

[Lorenzo Bianconi <lorenzo@kernel.org>]

[-- Attachment #1: Type: text/plain, Size: 1235 bytes --]

> On Thu, 8 Aug 2024 15:27:33 +0200
> Okba Slatnia <okbaslatnia@gmail.com> wrote:
> 
> > Hi all,

Hi Okba,

> > 
> > I'm building a yocto firmware based on Linux kernel version 5.15.148
> > and i'm facing a little limitation or problem preventing me from
> > changing the value of the sampling_frequency of the accelerator:
> > /sys/bus/iio/devices/iio:device0/sampling_frequency
> > despite i'm following the
> > /sys/bus/iio/devices/iio:device0/sampling_frequenc_available for the
> > possible values.
> > for the info , i can successfully change the sampling_frequency on
> > another yocto firmware based on Linux kernel version 4.19 and despite
> > keeping the same kernel flags confs i'm still facing this issue , i
> > made sure it's not an access right issue because i can change other
> > files in the same path with same access rights.

Can you please provide more details about the issue? Are you able to change
gyro sample frequency? Is the sensor-hub enabled?

Regards,
Lorenzo

> > 
> > Can you please help me and tell me if I missed anything ?
> > Thanks in advance.
> > Best Regards.
> > --
> > Okba
> 
> +CC Lorenzo on basis maybe he's seen this before?
> 
> Jonathan
> 
> > 
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]