> The `odr` field in struct st_lsm6dsx_sensor contains a data rate
> value expressed in mHz, not in Hz.

ack, can you please the proper Fixes tag?

Regards,
Lorenzo

> 
> Signed-off-by: Francesco Lavra <flavra@baylibre.com>
> ---
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> index c225b246c8a5..bd366c6e282a 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> @@ -365,7 +365,7 @@ enum st_lsm6dsx_fifo_mode {
>   * @id: Sensor identifier.
>   * @hw: Pointer to instance of struct st_lsm6dsx_hw.
>   * @gain: Configured sensor sensitivity.
> - * @odr: Output data rate of the sensor [Hz].
> + * @odr: Output data rate of the sensor [mHz].
>   * @samples_to_discard: Number of samples to discard for filters settling time.
>   * @watermark: Sensor watermark level.
>   * @decimator: Sensor decimation factor.
> -- 
> 2.39.5
>