Re: [PATCH v2 3/6] iio: accel: mma8452: use local struct device

[Andy Shevchenko <andriy.shevchenko@intel.com>]

On Wed, Apr 22, 2026 at 10:26:40PM +0530, Sanjay Chitroda wrote:

> Introduce a local struct device pointer derived from &client->dev.
> This avoids repeated &client->dev usage and improves readability.

...

> static int mma8452_set_runtime_pm_state(struct i2c_client *client, bool on)
>  {
>  #ifdef CONFIG_PM

So, this seems to be a missed in the PM patch.

>  	int ret;
> +	struct device *dev = &client->dev;

Keep it in reversed xmas tree order.

>  	if (on)
> -		ret = pm_runtime_resume_and_get(&client->dev);
> +		ret = pm_runtime_resume_and_get(dev);
>  	else
> -		ret = pm_runtime_put_autosuspend(&client->dev);
> +		ret = pm_runtime_put_autosuspend(dev);
>  	if (ret < 0) {
> -		dev_err(&client->dev,
> +		dev_err(dev,
>  			"failed to change power state to %d\n", on);
>  
>  		return ret;

>  }

...

>  static int mma8452_probe(struct i2c_client *client)
>  {
>  	struct mma8452_data *data;
> +	struct device *dev = &client->dev;

Same here, reversed xmas tree order.

>  	struct iio_dev *indio_dev;
>  	int ret;

...

>  	data->chip_info = i2c_get_match_data(client);
>  	if (!data->chip_info)
> -		return dev_err_probe(&client->dev, -ENODEV,
> +		return dev_err_probe(dev, -ENODEV,
>  				     "unknown device model\n");

Now it's a single line.

...

>  	ret = regulator_enable(data->vdd_reg);
>  	if (ret) {
> -		dev_err(&client->dev, "failed to enable VDD regulator!\n");
> +		dev_err(dev, "failed to enable VDD regulator!\n");
>  		return ret;

Convert this to dev_err_probe() before doing this patch. In that patch you
introduce temporary dev variable already. Here will use in the other places.

>  	}
>  
>  	ret = regulator_enable(data->vddio_reg);
>  	if (ret) {
> -		dev_err(&client->dev, "failed to enable VDDIO regulator!\n");
> +		dev_err(dev, "failed to enable VDDIO regulator!\n");
>  		goto disable_regulator_vdd;

Ditto.

>  	}

...

> +	pm_runtime_set_autosuspend_delay(dev,
>  					 MMA8452_AUTO_SUSPEND_DELAY_MS);

Now a single line.

-- 
With Best Regards,
Andy Shevchenko