Linux IIO development
 help / color / mirror / Atom feed
From: "Nuno Sá" <noname.nuno@gmail.com>
To: "Nicolás Antinori" <nico.antinori.7@gmail.com>
Cc: "Jonathan Cameron" <jic23@kernel.org>,
	"Andy Shevchenko" <andy@kernel.org>,
	"Brigham Campbell" <me@brighamcampbell.com>,
	"David Lechner" <dlechner@baylibre.com>,
	"Jori Koolstra" <jkoolstra@xs4all.nl>,
	"Nuno Sá" <nuno.sa@analog.com>,
	"Shuah Khan" <skhan@linuxfoundation.org>,
	linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-kernel-mentees@lists.linux.dev
Subject: Re: [PATCH] iio: humidity: am2315: add am2320 to i2c_device_id table
Date: Thu, 6 Aug 2026 10:46:13 +0100	[thread overview]
Message-ID: <anRXbXxTLUfUgEPd@nsa> (raw)
In-Reply-To: <20260805183733.1000550-1-nico.antinori.7@gmail.com>

On Wed, Aug 05, 2026 at 03:37:26PM -0300, Nicolás Antinori wrote:
> The AM2320 is fully compatible with the AM2315 sensor in terms of I2C
> communication protocol and measurement conversions.
> 
> Add the "am2320" entry to the i2c_device_id table.
> 
> Signed-off-by: Nicolás Antinori <nico.antinori.7@gmail.com>
> ---

One minor comment from me (maybe Jonathan can tweak it while applying).
With that:

Reviewed-by: Nuno Sá <nuno.sa@analog.com>

> Tested with Raspberry Pi 3b+
> 
> Used as reference AM2315 Datasheet [1] and AM2320 datasheet [2]
> 
> [1] https://cdn-shop.adafruit.com/datasheets/AM2315.pdf
> [2] https://cdn-shop.adafruit.com/product-files/3721/AM2320.pdf
> 
>  drivers/iio/humidity/Kconfig  | 4 ++--
>  drivers/iio/humidity/am2315.c | 3 ++-
>  2 files changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig
> index 54f11f000b6f..6907805945f3 100644
> --- a/drivers/iio/humidity/Kconfig
> +++ b/drivers/iio/humidity/Kconfig
> @@ -5,13 +5,13 @@
>  menu "Humidity sensors"
> 
>  config AM2315
> -	tristate "Aosong AM2315 relative humidity and temperature sensor"
> +	tristate "Aosong AM2315/AM2320 relative humidity and temperature sensor"
>  	depends on I2C
>  	select IIO_BUFFER
>  	select IIO_TRIGGERED_BUFFER
>  	help
>  	  If you say yes here you get support for the Aosong AM2315
> -	  relative humidity and ambient temperature sensor.
> +	  and AM2320 relative humidity and ambient temperature sensors.

The above (same on the tristate title) does not really scale nicely and
we've seen too often already. So I use something like "... and similar
devices"

- Nuno Sá

> 
>  	  This driver can also be built as a module. If so, the module will
>  	  be called am2315.
> diff --git a/drivers/iio/humidity/am2315.c b/drivers/iio/humidity/am2315.c
> index f29baa251f9f..5bce5eec45cc 100644
> --- a/drivers/iio/humidity/am2315.c
> +++ b/drivers/iio/humidity/am2315.c
> @@ -1,6 +1,6 @@
>  // SPDX-License-Identifier: GPL-2.0-only
>  /*
> - * Aosong AM2315 relative humidity and temperature
> + * Aosong AM2315/AM2320 relative humidity and temperature
>   *
>   * Copyright (c) 2016, Intel Corporation.
>   *
> @@ -251,6 +251,7 @@ static int am2315_probe(struct i2c_client *client)
> 
>  static const struct i2c_device_id am2315_i2c_id[] = {
>  	{ .name = "am2315" },
> +	{ .name = "am2320" },
>  	{ }
>  };
>  MODULE_DEVICE_TABLE(i2c, am2315_i2c_id);
> --
> 2.47.3
> 

  parent reply	other threads:[~2026-08-06  9:45 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-05 18:37 [PATCH] iio: humidity: am2315: add am2320 to i2c_device_id table Nicolás Antinori
2026-08-06  1:37 ` Marcelo Schmitt
2026-08-06  9:46 ` Nuno Sá [this message]
2026-08-06 21:34   ` Andy Shevchenko
2026-08-07 12:39     ` Nicolás Antinori

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=anRXbXxTLUfUgEPd@nsa \
    --to=noname.nuno@gmail.com \
    --cc=andy@kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=jic23@kernel.org \
    --cc=jkoolstra@xs4all.nl \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel-mentees@lists.linux.dev \
    --cc=linux-kernel@vger.kernel.org \
    --cc=me@brighamcampbell.com \
    --cc=nico.antinori.7@gmail.com \
    --cc=nuno.sa@analog.com \
    --cc=skhan@linuxfoundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox