From: Gregor Boirie <gregor.boirie@parrot.com>
To: <linux-iio@vger.kernel.org>
Cc: Jonathan Cameron <jic23@kernel.org>,
Hartmut Knaack <knaack.h@gmx.de>,
Lars-Peter Clausen <lars@metafoo.de>,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
Linus Walleij <linus.walleij@linaro.org>,
Denis Ciocca <denis.ciocca@st.com>,
Giuseppe Barba <giuseppe.barba@st.com>,
Crestez Dan Leonard <leonard.crestez@intel.com>,
Gregor Boirie <gregor.boirie@parrot.com>
Subject: [PATCH v1 7/7] iio:st_pressure:lps22hb: temperature support
Date: Thu, 23 Jun 2016 15:49:49 +0200 [thread overview]
Message-ID: <b4869f2d40e47f62113559dfd98e0d38cac56cbb.1466687364.git.gregor.boirie@parrot.com> (raw)
In-Reply-To: <cover.1466687364.git.gregor.boirie@parrot.com>
Implement lps22hb temperature sampling channel.
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
---
drivers/iio/pressure/st_pressure_core.c | 28 +++++++++++++++++++++++++---
1 file changed, 25 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index fad54c3..fdc228c 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -196,6 +196,10 @@
* See LPS22HB datasheet:
* http://www2.st.com/resource/en/datasheet/lps22hb.pdf
*/
+
+/* LPS22HB temperature sensitivity */
+#define ST_PRESS_LPS22HB_LSB_PER_CELSIUS 100UL
+
#define ST_PRESS_LPS22HB_WAI_EXP 0xb1
#define ST_PRESS_LPS22HB_ODR_ADDR 0x10
#define ST_PRESS_LPS22HB_ODR_MASK 0x70
@@ -307,7 +311,24 @@ static const struct iio_chan_spec st_press_lps22hb_channels[] = {
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
.modified = 0,
},
- IIO_CHAN_SOFT_TIMESTAMP(1)
+ {
+ .type = IIO_TEMP,
+ .channel2 = IIO_NO_MOD,
+ .address = ST_TEMP_1_OUT_L_ADDR,
+ .scan_index = 1,
+ .scan_type = {
+ .sign = 's',
+ .realbits = 16,
+ .storagebits = 16,
+ .endianness = IIO_LE,
+ },
+ .info_mask_separate =
+ BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE),
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ .modified = 0,
+ },
+ IIO_CHAN_SOFT_TIMESTAMP(2)
};
static const struct st_sensor_settings st_press_sensors_settings[] = {
@@ -494,12 +515,13 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
.fs = {
.fs_avl = {
/*
- * Sensitivity values as defined in table 3 of
- * LPS22HB datasheet.
+ * Pressure and temperature sensitivity values
+ * as defined in table 3 of LPS22HB datasheet.
*/
[0] = {
.num = ST_PRESS_FS_AVL_1260MB,
.gain = ST_PRESS_KPASCAL_NANO_SCALE,
+ .gain2 = ST_PRESS_LPS22HB_LSB_PER_CELSIUS,
},
},
},
--
2.1.4
next prev parent reply other threads:[~2016-06-23 13:48 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-23 13:49 [PATCH v1 0/7] iio:st_pressure: improvements Gregor Boirie
2016-06-23 13:49 ` [PATCH v1 1/7] iio:st_pressure: fix sampling gains (bring inline with ABI) Gregor Boirie
2016-06-26 17:31 ` Jonathan Cameron
2016-06-23 13:49 ` [PATCH v1 2/7] iio:st_sensors: align on storagebits boundaries Gregor Boirie
2016-06-26 17:30 ` Jonathan Cameron
2016-06-23 13:49 ` [PATCH v1 3/7] iio:st_pressure: align storagebits on power of 2 Gregor Boirie
2016-06-26 17:32 ` Jonathan Cameron
2016-06-23 13:49 ` [PATCH v1 4/7] iio:st_pressure: document sampling gains Gregor Boirie
2016-06-26 17:34 ` Jonathan Cameron
2016-06-23 13:49 ` [PATCH v1 5/7] iio:st_pressure: temperature triggered buffering Gregor Boirie
2016-06-26 17:36 ` Jonathan Cameron
2016-06-23 13:49 ` [PATCH v1 6/7] iio:st_pressure:lps22hb: open drain support Gregor Boirie
2016-06-23 13:49 ` Gregor Boirie [this message]
2016-06-26 17:38 ` [PATCH v1 7/7] iio:st_pressure:lps22hb: temperature support Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b4869f2d40e47f62113559dfd98e0d38cac56cbb.1466687364.git.gregor.boirie@parrot.com \
--to=gregor.boirie@parrot.com \
--cc=denis.ciocca@st.com \
--cc=giuseppe.barba@st.com \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=leonard.crestez@intel.com \
--cc=linus.walleij@linaro.org \
--cc=linux-iio@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).