Re: [PATCH 0/3] ti,ads7950 device tree bindings

[David Lechner <david@lechnology.com>]

On 01/15/2017 07:58 AM, Jonathan Cameron wrote:
> On 11/01/17 17:52, David Lechner wrote:
>> This series adds device tree bindings for the TI ADS7950 family of A/DC chips.
>> The series includes the bindings documentation and some fixes to the iio driver
>> to make it work with the device tree bindings.
>>
>> FYI, the ads7950 driver has not made it into mainline yet, so no worries about
>> breaking anyone with these changes.
>>
> And here's the bit I failed to read!
>
> As an extra point, could you confirm what /sys/bus/iio/iio\:deviceX/name for this
> one reads?  I have a feeling this is another case of what Lars has been pointing
> out in other drivers this morning.  That name should be the device part number..
>

cat /sys/bus/iio/devices/iio\:device0/name
ads7957

This is the part number for the specific chip I am using. So, I am 
guessing that it is correct unless it is supposed to be upper case or 
something like that.



> Thanks,
>
> Jonathan
>> David Lechner (3):
>>   DT/bindings: Add bindings for TI ADS7950 A/DC chips
>>   iio: adc: ti-ads7950: Drop "ti-" prefix from module name
>>   iio: adc: ti-ads7950: Change regulator matching string to "vref"
>>
>>  .../devicetree/bindings/iio/adc/ti-ads7950.txt     | 23 ++++++++++++++++
>>  drivers/iio/adc/ti-ads7950.c                       | 32 +++++++++++-----------
>>  2 files changed, 39 insertions(+), 16 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-ads7950.txt
>>
>