From: bugzilla-daemon@bugzilla.kernel.org
To: linux-iio@vger.kernel.org
Subject: [Bug 214751] New: Lenovo Yoga Chromebook C630 i7 missing support for sound, microphone, touchscreen and gyroscope
Date: Mon, 18 Oct 2021 10:45:22 +0000 [thread overview]
Message-ID: <bug-214751-217253@https.bugzilla.kernel.org/> (raw)
https://bugzilla.kernel.org/show_bug.cgi?id=214751
Bug ID: 214751
Summary: Lenovo Yoga Chromebook C630 i7 missing support for
sound, microphone, touchscreen and gyroscope
Product: Drivers
Version: 2.5
Kernel Version: Kernel: 5.14.9-1-default
Hardware: x86-64
OS: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: IIO
Assignee: drivers_iio@kernel-bugs.kernel.org
Reporter: waownn@gmail.com
Regression: No
Description of problem:
Lenovo Yoga Chromebook C630 missing support for sound, microphone, touchscreen
and gyroscope
I don't know
Steps to Reproduce:
Install openSUSE tumbleweed on Lenovo Yoga Chromebook C630 i7
Sound, microphone, touchscreen and gyroscope don't work
dmesg -l err
[ 0.102481] x86/cpu: SGX disabled by BIOS.
[ 1.773005] bbswitch: No discrete VGA device found
[ 6.557733] bbswitch: No discrete VGA device found
[ 7.619221] raydium_ts i2c-RAYD0001:00: failed to get reset gpio: -16
[ 7.644559] elants_i2c i2c-ELAN0001:00: nothing at this address
[ 7.778824] cros-ec-typec GOOG0014:00: No port entries found.
[ 8.992072] snd_soc_skl 0000:00:1f.3: Fallback tplg fw dfw_sst.bin load failed
with -2
[ 8.992190] snd_soc_skl 0000:00:1f.3: Failed to init topology!
[ 8.992269] snd_soc_skl 0000:00:1f.3: ASoC: error at snd_soc_component_probe on
0000:00:1f.3: -2 [ 8.992423] kbl_da7219_max98357a kbl_da7219_mx98357a: ASoC:
failed to instantiate card -2
dmesg -l warn
[ 0.112434] MDS CPU bug present and SMT on, data leak possible. See
https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more
details.
[ 0.112434] #2 #3 #4 #5 #6 #7
[ 0.797040] i8042**: PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp**
[ 0.797490] i8042**: Warning: Keylock active**
[ 1.745759] systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit
configured to use KillMode=none. This is unsafe, as it disables systemd's
process lifecycle management for the service. Please update your service to use
a safer KillMode=, such as 'mixed' or 'control-group'. Support for
KillMode=none is deprecated and will eventually be removed.
[ 1.772713] bbswitch**: loading out-of-tree module taints kernel.**
[ 7.619142] elants_i2c i2c-ELAN0001:00**: supply vcc33 not found, using dummy
regulator**
[ 7.619161] raydium_ts i2c-RAYD0001:00**: supply avdd not found, using dummy
regulator**
[ 7.619176] elants_i2c i2c-ELAN0001:00**: supply vccio not found, using dummy
regulator**
[ 7.619192] raydium_ts i2c-RAYD0001:00**: supply vccio not found, using dummy
regulator**
[ 7.764465] raydium_ts**: probe of i2c-RAYD0001:00 failed with error -16**
[ 7.780375] elan_i2c i2c-ELAN0000:00**: supply vcc not found, using dummy
regulator**
[ 8.377570] Could not create tracefs 'cros_ec_sensorhub_filter' directory
[ 8.377575] Could not create tracefs 'cros_ec_sensorhub_data' directory
[ 8.377578] Could not create tracefs 'cros_ec_sensorhub_timestamp' directory
[ 8.377583] Could not create tracefs 'cros_ec_request_done' directory
[ 8.377586] Could not create tracefs 'cros_ec_request_start' directory
[ 8.393085] da7219 i2c-DLGS7219:00**: Using default DAI clk names:
da7219-dai-wclk, da7219-dai-bclk**
[ 8.659892] thermal thermal_zone7**: failed to read out thermal zone (-61)**
[ 8.980605] HDMI HDA Codec ehdaudio0D2**: Max dais supported: 3**
[ 8.991953] snd_soc_skl 0000:00:1f.3**: Direct firmware load for
9d71-GOOGLE-NAMIMAX-0-tplg.bin failed with error -2**
[ 8.992017] snd_soc_skl 0000:00:1f.3**: Direct firmware load for
kbl_da7219_mx98357a-tplg.bin failed with error -2**
[ 8.992067] snd_soc_skl 0000:00:1f.3**: Direct firmware load for dfw_sst.bin
failed with error -2**
[ 8.992851] kbl_da7219_max98357a**: probe of kbl_da7219_mx98357a failed with
error -2**
[ 94.340046] pcieport 0000:00:1c.0**: PCIe Bus Error: severity=Corrected,
type=Physical Layer, (Receiver ID)**
[ 94.340051] pcieport 0000:00:1c.0**: device [8086:9d13] error
status/mask=00000001/00002000**
[ 94.340058] pcieport 0000:00:1c.0**: [ 0] RxErr**
--
You may reply to this email to add a comment.
You are receiving this mail because:
You are watching the assignee of the bug.
next reply other threads:[~2021-10-18 10:45 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-18 10:45 bugzilla-daemon [this message]
2021-10-19 12:27 ` [Bug 214751] Lenovo Yoga Chromebook C630 i7 missing support for sound, microphone, touchscreen and gyroscope bugzilla-daemon
2021-10-28 9:12 ` bugzilla-daemon
2021-10-31 11:26 ` bugzilla-daemon
2021-10-31 11:26 ` bugzilla-daemon
2021-10-31 11:28 ` bugzilla-daemon
2024-01-27 13:17 ` bugzilla-daemon
2024-01-27 13:19 ` bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-214751-217253@https.bugzilla.kernel.org/ \
--to=bugzilla-daemon@bugzilla.kernel.org \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).