Re: [PATCH v6 0/13] Add support for AXP192 PMIC

[Aidan MacDonald <aidanmacdonald.0x0@gmail.com>]

Hi Alex,

Jonathan Cameron <jic23@kernel.org> writes:

> On Fri, 7 Jun 2024 17:12:51 +0200
> Alex Bee <knaerzche@gmail.com> wrote:
>
>> Hi Aidan,
>>
>> Am 17.10.22 um 01:43 schrieb Aidan MacDonald:
>> > This series adds support for the AXP192 PMIC to the AXP20x MFD driver
>> > framework, including support for regulators, ADCs, and AC/USB/battery
>> > power supplies.
>> >
>> > v6 is a resend of v5 from July -- the patches haven't changed at all
>> > but I've rebased them on the latest git master branch.
>> I'm not entirely sure if I've found the latest version of the patches - at
>> least b4 didn't find a newer. It looks a lot like only mfd and usb-power
>> patches have been applied for some reason. Are you planing to resend the
>> other ones?

These patches were part of porting Linux to a music player I had, but I
lost interest in the project and I'm not really paying attention to the
mailing list anymore. As Jonathan already indicated, there were some
cross-tree dependencies on mfd, and I think on regmap-irq as well.
I didn't realize at first how much of a headache it was to deal with
these things. :)

Eventually I resubmitted the mfd patch separately and did the same for
the USB power patch (after removing the mfd dependency) so both of those
got merged. Didn't get around to doing the other patches unfortunately.

Regards,
Aidan

>
> This was delayed originally by a dependency on a header in mfd and that is
> obviously resolved now.  I think everyone was expecting a resend
> of the series or for Lee to pick up the dependent ones and so we all
> stopped tracking it.
>
> Anyhow, I had the two IIO cleanups already, but I've now picked up
> the 3rd patch (where the dependency was) as well.
>
> Thanks,
>
> Jonathan
>
>>
>> Regards,
>> Alex
>>
>> > Aidan MacDonald (13):
>> >    dt-bindings: mfd: add bindings for AXP192 MFD device
>> >    dt-bindings: iio: adc: axp209: Add AXP192 compatible
>> >    dt-bindings: power: supply: axp20x: Add AXP192 compatible
>> >    dt-bindings: power: axp20x-battery: Add AXP192 compatible
>> >    mfd: axp20x: Add support for AXP192
>> >    regulator: axp20x: Add support for AXP192
>> >    iio: adc: axp20x_adc: Minor code cleanups
>> >    iio: adc: axp20x_adc: Replace adc_en2 flag with adc_en2_mask field
>> >    iio: adc: axp20x_adc: Add support for AXP192
>> >    power: supply: axp20x_usb_power: Add support for AXP192
>> >    power: axp20x_battery: Add constant charge current table
>> >    power: axp20x_battery: Support battery status without fuel gauge
>> >    power: axp20x_battery: Add support for AXP192
>> >
>> >   .../bindings/iio/adc/x-powers,axp209-adc.yaml |  18 +
>> >   .../bindings/mfd/x-powers,axp152.yaml         |   1 +
>> >   .../x-powers,axp20x-battery-power-supply.yaml |   1 +
>> >   .../x-powers,axp20x-usb-power-supply.yaml     |   1 +
>> >   drivers/iio/adc/axp20x_adc.c                  | 356 ++++++++++++++++--
>> >   drivers/mfd/axp20x-i2c.c                      |   2 +
>> >   drivers/mfd/axp20x.c                          | 141 +++++++
>> >   drivers/power/supply/axp20x_battery.c         | 142 ++++++-
>> >   drivers/power/supply/axp20x_usb_power.c       |  84 ++++-
>> >   drivers/regulator/axp20x-regulator.c          | 100 ++++-
>> >   include/linux/mfd/axp20x.h                    |  84 +++++
>> >   11 files changed, 856 insertions(+), 74 deletions(-)
>> >