From: Jonathan Cameron <jic23@kernel.org>
To: Linus Walleij <linus.walleij@linaro.org>, linux-iio@vger.kernel.org
Cc: Giuseppe Barba <giuseppe.barba@st.com>,
Denis Ciocca <denis.ciocca@st.com>,
Gregor Boirie <gregor.boirie@parrot.com>,
Crestez Dan Leonard <leonard.crestez@intel.com>
Subject: Re: [PATCH 1/4] iio: accel: st_accel: inline per-sensor data
Date: Sat, 12 Nov 2016 15:29:48 +0000 [thread overview]
Message-ID: <ccbc6b6d-c5a7-7fe0-b82d-a27780e6836e@kernel.org> (raw)
In-Reply-To: <1478704200-19046-2-git-send-email-linus.walleij@linaro.org>
On 09/11/16 15:09, Linus Walleij wrote:
> We have #defines for all the individual sensor registers and
> value/mask pairs #defined at the top of the file and used at
> exactly one spot.
>
> This is usually good if the #defines give a meaning to the
> opaque magic numbers.
>
> However in this case, the semantic meaning is inherent in the
> name of the C99-addressable fields, and that means duplication
> of information, and only makes the code hard to maintain since
> you every time have to add a new #define AND update the site
> where it is to be used.
>
> Get rid of the #defines and just open code the values into the
> appropriate struct elements. Make sure to explicitly address
> the .hz and .value fields in the st_sensor_odr_avl struct
> so that the meaning of all values is clear.
>
> This patch is purely syntactic should have no semantic effect.
>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Interesting that sensor type 5 has IG1 address / mask defined (previously) but
not used... hohum. I have no idea what those even are ;)
My only conselation in having just checked this is it must have
been even more boring to write as a patch!
Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to play with it.
Thanks,
Jonathan
> ---
> drivers/iio/accel/st_accel_core.c | 538 +++++++++++++-------------------------
> 1 file changed, 177 insertions(+), 361 deletions(-)
>
> diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
> index da3fb069ec5c..d21b2dbe7432 100644
> --- a/drivers/iio/accel/st_accel_core.c
> +++ b/drivers/iio/accel/st_accel_core.c
> @@ -43,194 +43,6 @@
> #define ST_ACCEL_FS_AVL_200G 200
> #define ST_ACCEL_FS_AVL_400G 400
>
> -/* CUSTOM VALUES FOR SENSOR 1 */
> -#define ST_ACCEL_1_WAI_EXP 0x33
> -#define ST_ACCEL_1_ODR_ADDR 0x20
> -#define ST_ACCEL_1_ODR_MASK 0xf0
> -#define ST_ACCEL_1_ODR_AVL_1HZ_VAL 0x01
> -#define ST_ACCEL_1_ODR_AVL_10HZ_VAL 0x02
> -#define ST_ACCEL_1_ODR_AVL_25HZ_VAL 0x03
> -#define ST_ACCEL_1_ODR_AVL_50HZ_VAL 0x04
> -#define ST_ACCEL_1_ODR_AVL_100HZ_VAL 0x05
> -#define ST_ACCEL_1_ODR_AVL_200HZ_VAL 0x06
> -#define ST_ACCEL_1_ODR_AVL_400HZ_VAL 0x07
> -#define ST_ACCEL_1_ODR_AVL_1600HZ_VAL 0x08
> -#define ST_ACCEL_1_FS_ADDR 0x23
> -#define ST_ACCEL_1_FS_MASK 0x30
> -#define ST_ACCEL_1_FS_AVL_2_VAL 0x00
> -#define ST_ACCEL_1_FS_AVL_4_VAL 0x01
> -#define ST_ACCEL_1_FS_AVL_8_VAL 0x02
> -#define ST_ACCEL_1_FS_AVL_16_VAL 0x03
> -#define ST_ACCEL_1_FS_AVL_2_GAIN IIO_G_TO_M_S_2(1000)
> -#define ST_ACCEL_1_FS_AVL_4_GAIN IIO_G_TO_M_S_2(2000)
> -#define ST_ACCEL_1_FS_AVL_8_GAIN IIO_G_TO_M_S_2(4000)
> -#define ST_ACCEL_1_FS_AVL_16_GAIN IIO_G_TO_M_S_2(12000)
> -#define ST_ACCEL_1_BDU_ADDR 0x23
> -#define ST_ACCEL_1_BDU_MASK 0x80
> -#define ST_ACCEL_1_DRDY_IRQ_ADDR 0x22
> -#define ST_ACCEL_1_DRDY_IRQ_INT1_MASK 0x10
> -#define ST_ACCEL_1_DRDY_IRQ_INT2_MASK 0x08
> -#define ST_ACCEL_1_IHL_IRQ_ADDR 0x25
> -#define ST_ACCEL_1_IHL_IRQ_MASK 0x02
> -#define ST_ACCEL_1_MULTIREAD_BIT true
> -
> -/* CUSTOM VALUES FOR SENSOR 2 */
> -#define ST_ACCEL_2_WAI_EXP 0x32
> -#define ST_ACCEL_2_ODR_ADDR 0x20
> -#define ST_ACCEL_2_ODR_MASK 0x18
> -#define ST_ACCEL_2_ODR_AVL_50HZ_VAL 0x00
> -#define ST_ACCEL_2_ODR_AVL_100HZ_VAL 0x01
> -#define ST_ACCEL_2_ODR_AVL_400HZ_VAL 0x02
> -#define ST_ACCEL_2_ODR_AVL_1000HZ_VAL 0x03
> -#define ST_ACCEL_2_PW_ADDR 0x20
> -#define ST_ACCEL_2_PW_MASK 0xe0
> -#define ST_ACCEL_2_FS_ADDR 0x23
> -#define ST_ACCEL_2_FS_MASK 0x30
> -#define ST_ACCEL_2_FS_AVL_2_VAL 0X00
> -#define ST_ACCEL_2_FS_AVL_4_VAL 0X01
> -#define ST_ACCEL_2_FS_AVL_8_VAL 0x03
> -#define ST_ACCEL_2_FS_AVL_2_GAIN IIO_G_TO_M_S_2(1000)
> -#define ST_ACCEL_2_FS_AVL_4_GAIN IIO_G_TO_M_S_2(2000)
> -#define ST_ACCEL_2_FS_AVL_8_GAIN IIO_G_TO_M_S_2(3900)
> -#define ST_ACCEL_2_BDU_ADDR 0x23
> -#define ST_ACCEL_2_BDU_MASK 0x80
> -#define ST_ACCEL_2_DRDY_IRQ_ADDR 0x22
> -#define ST_ACCEL_2_DRDY_IRQ_INT1_MASK 0x02
> -#define ST_ACCEL_2_DRDY_IRQ_INT2_MASK 0x10
> -#define ST_ACCEL_2_IHL_IRQ_ADDR 0x22
> -#define ST_ACCEL_2_IHL_IRQ_MASK 0x80
> -#define ST_ACCEL_2_OD_IRQ_ADDR 0x22
> -#define ST_ACCEL_2_OD_IRQ_MASK 0x40
> -#define ST_ACCEL_2_MULTIREAD_BIT true
> -
> -/* CUSTOM VALUES FOR SENSOR 3 */
> -#define ST_ACCEL_3_WAI_EXP 0x40
> -#define ST_ACCEL_3_ODR_ADDR 0x20
> -#define ST_ACCEL_3_ODR_MASK 0xf0
> -#define ST_ACCEL_3_ODR_AVL_3HZ_VAL 0x01
> -#define ST_ACCEL_3_ODR_AVL_6HZ_VAL 0x02
> -#define ST_ACCEL_3_ODR_AVL_12HZ_VAL 0x03
> -#define ST_ACCEL_3_ODR_AVL_25HZ_VAL 0x04
> -#define ST_ACCEL_3_ODR_AVL_50HZ_VAL 0x05
> -#define ST_ACCEL_3_ODR_AVL_100HZ_VAL 0x06
> -#define ST_ACCEL_3_ODR_AVL_200HZ_VAL 0x07
> -#define ST_ACCEL_3_ODR_AVL_400HZ_VAL 0x08
> -#define ST_ACCEL_3_ODR_AVL_800HZ_VAL 0x09
> -#define ST_ACCEL_3_ODR_AVL_1600HZ_VAL 0x0a
> -#define ST_ACCEL_3_FS_ADDR 0x24
> -#define ST_ACCEL_3_FS_MASK 0x38
> -#define ST_ACCEL_3_FS_AVL_2_VAL 0X00
> -#define ST_ACCEL_3_FS_AVL_4_VAL 0X01
> -#define ST_ACCEL_3_FS_AVL_6_VAL 0x02
> -#define ST_ACCEL_3_FS_AVL_8_VAL 0x03
> -#define ST_ACCEL_3_FS_AVL_16_VAL 0x04
> -#define ST_ACCEL_3_FS_AVL_2_GAIN IIO_G_TO_M_S_2(61)
> -#define ST_ACCEL_3_FS_AVL_4_GAIN IIO_G_TO_M_S_2(122)
> -#define ST_ACCEL_3_FS_AVL_6_GAIN IIO_G_TO_M_S_2(183)
> -#define ST_ACCEL_3_FS_AVL_8_GAIN IIO_G_TO_M_S_2(244)
> -#define ST_ACCEL_3_FS_AVL_16_GAIN IIO_G_TO_M_S_2(732)
> -#define ST_ACCEL_3_BDU_ADDR 0x20
> -#define ST_ACCEL_3_BDU_MASK 0x08
> -#define ST_ACCEL_3_DRDY_IRQ_ADDR 0x23
> -#define ST_ACCEL_3_DRDY_IRQ_INT1_MASK 0x80
> -#define ST_ACCEL_3_DRDY_IRQ_INT2_MASK 0x00
> -#define ST_ACCEL_3_IHL_IRQ_ADDR 0x23
> -#define ST_ACCEL_3_IHL_IRQ_MASK 0x40
> -#define ST_ACCEL_3_IG1_EN_ADDR 0x23
> -#define ST_ACCEL_3_IG1_EN_MASK 0x08
> -#define ST_ACCEL_3_MULTIREAD_BIT false
> -
> -/* CUSTOM VALUES FOR SENSOR 4 */
> -#define ST_ACCEL_4_WAI_EXP 0x3a
> -#define ST_ACCEL_4_ODR_ADDR 0x20
> -#define ST_ACCEL_4_ODR_MASK 0x30 /* DF1 and DF0 */
> -#define ST_ACCEL_4_ODR_AVL_40HZ_VAL 0x00
> -#define ST_ACCEL_4_ODR_AVL_160HZ_VAL 0x01
> -#define ST_ACCEL_4_ODR_AVL_640HZ_VAL 0x02
> -#define ST_ACCEL_4_ODR_AVL_2560HZ_VAL 0x03
> -#define ST_ACCEL_4_PW_ADDR 0x20
> -#define ST_ACCEL_4_PW_MASK 0xc0
> -#define ST_ACCEL_4_FS_ADDR 0x21
> -#define ST_ACCEL_4_FS_MASK 0x80
> -#define ST_ACCEL_4_FS_AVL_2_VAL 0X00
> -#define ST_ACCEL_4_FS_AVL_6_VAL 0X01
> -#define ST_ACCEL_4_FS_AVL_2_GAIN IIO_G_TO_M_S_2(1024)
> -#define ST_ACCEL_4_FS_AVL_6_GAIN IIO_G_TO_M_S_2(340)
> -#define ST_ACCEL_4_BDU_ADDR 0x21
> -#define ST_ACCEL_4_BDU_MASK 0x40
> -#define ST_ACCEL_4_DRDY_IRQ_ADDR 0x21
> -#define ST_ACCEL_4_DRDY_IRQ_INT1_MASK 0x04
> -#define ST_ACCEL_4_MULTIREAD_BIT true
> -
> -/* CUSTOM VALUES FOR SENSOR 5 */
> -#define ST_ACCEL_5_WAI_EXP 0x3b
> -#define ST_ACCEL_5_ODR_ADDR 0x20
> -#define ST_ACCEL_5_ODR_MASK 0x80
> -#define ST_ACCEL_5_ODR_AVL_100HZ_VAL 0x00
> -#define ST_ACCEL_5_ODR_AVL_400HZ_VAL 0x01
> -#define ST_ACCEL_5_PW_ADDR 0x20
> -#define ST_ACCEL_5_PW_MASK 0x40
> -#define ST_ACCEL_5_FS_ADDR 0x20
> -#define ST_ACCEL_5_FS_MASK 0x20
> -#define ST_ACCEL_5_FS_AVL_2_VAL 0X00
> -#define ST_ACCEL_5_FS_AVL_8_VAL 0X01
> -/* TODO: check these resulting gain settings, these are not in the datsheet */
> -#define ST_ACCEL_5_FS_AVL_2_GAIN IIO_G_TO_M_S_2(18000)
> -#define ST_ACCEL_5_FS_AVL_8_GAIN IIO_G_TO_M_S_2(72000)
> -#define ST_ACCEL_5_DRDY_IRQ_ADDR 0x22
> -#define ST_ACCEL_5_DRDY_IRQ_INT1_MASK 0x04
> -#define ST_ACCEL_5_DRDY_IRQ_INT2_MASK 0x20
> -#define ST_ACCEL_5_IHL_IRQ_ADDR 0x22
> -#define ST_ACCEL_5_IHL_IRQ_MASK 0x80
> -#define ST_ACCEL_5_OD_IRQ_ADDR 0x22
> -#define ST_ACCEL_5_OD_IRQ_MASK 0x40
> -#define ST_ACCEL_5_IG1_EN_ADDR 0x21
> -#define ST_ACCEL_5_IG1_EN_MASK 0x08
> -#define ST_ACCEL_5_MULTIREAD_BIT false
> -
> -/* CUSTOM VALUES FOR SENSOR 6 */
> -#define ST_ACCEL_6_WAI_EXP 0x32
> -#define ST_ACCEL_6_ODR_ADDR 0x20
> -#define ST_ACCEL_6_ODR_MASK 0x18
> -#define ST_ACCEL_6_ODR_AVL_50HZ_VAL 0x00
> -#define ST_ACCEL_6_ODR_AVL_100HZ_VAL 0x01
> -#define ST_ACCEL_6_ODR_AVL_400HZ_VAL 0x02
> -#define ST_ACCEL_6_ODR_AVL_1000HZ_VAL 0x03
> -#define ST_ACCEL_6_PW_ADDR 0x20
> -#define ST_ACCEL_6_PW_MASK 0x20
> -#define ST_ACCEL_6_FS_ADDR 0x23
> -#define ST_ACCEL_6_FS_MASK 0x30
> -#define ST_ACCEL_6_FS_AVL_100_VAL 0x00
> -#define ST_ACCEL_6_FS_AVL_200_VAL 0x01
> -#define ST_ACCEL_6_FS_AVL_400_VAL 0x03
> -#define ST_ACCEL_6_FS_AVL_100_GAIN IIO_G_TO_M_S_2(49000)
> -#define ST_ACCEL_6_FS_AVL_200_GAIN IIO_G_TO_M_S_2(98000)
> -#define ST_ACCEL_6_FS_AVL_400_GAIN IIO_G_TO_M_S_2(195000)
> -#define ST_ACCEL_6_BDU_ADDR 0x23
> -#define ST_ACCEL_6_BDU_MASK 0x80
> -#define ST_ACCEL_6_DRDY_IRQ_ADDR 0x22
> -#define ST_ACCEL_6_DRDY_IRQ_INT1_MASK 0x02
> -#define ST_ACCEL_6_DRDY_IRQ_INT2_MASK 0x10
> -#define ST_ACCEL_6_IHL_IRQ_ADDR 0x22
> -#define ST_ACCEL_6_IHL_IRQ_MASK 0x80
> -#define ST_ACCEL_6_MULTIREAD_BIT true
> -
> -/* CUSTOM VALUES FOR SENSOR 7 */
> -#define ST_ACCEL_7_ODR_ADDR 0x20
> -#define ST_ACCEL_7_ODR_MASK 0x30
> -#define ST_ACCEL_7_ODR_AVL_280HZ_VAL 0x00
> -#define ST_ACCEL_7_ODR_AVL_560HZ_VAL 0x01
> -#define ST_ACCEL_7_ODR_AVL_1120HZ_VAL 0x02
> -#define ST_ACCEL_7_ODR_AVL_4480HZ_VAL 0x03
> -#define ST_ACCEL_7_PW_ADDR 0x20
> -#define ST_ACCEL_7_PW_MASK 0xc0
> -#define ST_ACCEL_7_FS_AVL_2_GAIN IIO_G_TO_M_S_2(488)
> -#define ST_ACCEL_7_BDU_ADDR 0x21
> -#define ST_ACCEL_7_BDU_MASK 0x40
> -#define ST_ACCEL_7_DRDY_IRQ_ADDR 0x21
> -#define ST_ACCEL_7_DRDY_IRQ_INT1_MASK 0x04
> -#define ST_ACCEL_7_MULTIREAD_BIT false
> -
> static const struct iio_chan_spec st_accel_8bit_channels[] = {
> ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
> BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
> @@ -281,7 +93,7 @@ static const struct iio_chan_spec st_accel_16bit_channels[] = {
>
> static const struct st_sensor_settings st_accel_sensors_settings[] = {
> {
> - .wai = ST_ACCEL_1_WAI_EXP,
> + .wai = 0x33,
> .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
> .sensors_supported = {
> [0] = LIS3DH_ACCEL_DEV_NAME,
> @@ -294,22 +106,22 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
> },
> .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
> .odr = {
> - .addr = ST_ACCEL_1_ODR_ADDR,
> - .mask = ST_ACCEL_1_ODR_MASK,
> + .addr = 0x20,
> + .mask = 0xf0,
> .odr_avl = {
> - { 1, ST_ACCEL_1_ODR_AVL_1HZ_VAL, },
> - { 10, ST_ACCEL_1_ODR_AVL_10HZ_VAL, },
> - { 25, ST_ACCEL_1_ODR_AVL_25HZ_VAL, },
> - { 50, ST_ACCEL_1_ODR_AVL_50HZ_VAL, },
> - { 100, ST_ACCEL_1_ODR_AVL_100HZ_VAL, },
> - { 200, ST_ACCEL_1_ODR_AVL_200HZ_VAL, },
> - { 400, ST_ACCEL_1_ODR_AVL_400HZ_VAL, },
> - { 1600, ST_ACCEL_1_ODR_AVL_1600HZ_VAL, },
> + { .hz = 1, .value = 0x01, },
> + { .hz = 10, .value = 0x02, },
> + { .hz = 25, .value = 0x03, },
> + { .hz = 50, .value = 0x04, },
> + { .hz = 100, .value = 0x05, },
> + { .hz = 200, .value = 0x06, },
> + { .hz = 400, .value = 0x07, },
> + { .hz = 1600, .value = 0x08, },
> },
> },
> .pw = {
> - .addr = ST_ACCEL_1_ODR_ADDR,
> - .mask = ST_ACCEL_1_ODR_MASK,
> + .addr = 0x20,
> + .mask = 0xf0,
> .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
> },
> .enable_axis = {
> @@ -317,48 +129,48 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
> .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
> },
> .fs = {
> - .addr = ST_ACCEL_1_FS_ADDR,
> - .mask = ST_ACCEL_1_FS_MASK,
> + .addr = 0x23,
> + .mask = 0x30,
> .fs_avl = {
> [0] = {
> .num = ST_ACCEL_FS_AVL_2G,
> - .value = ST_ACCEL_1_FS_AVL_2_VAL,
> - .gain = ST_ACCEL_1_FS_AVL_2_GAIN,
> + .value = 0x00,
> + .gain = IIO_G_TO_M_S_2(1000),
> },
> [1] = {
> .num = ST_ACCEL_FS_AVL_4G,
> - .value = ST_ACCEL_1_FS_AVL_4_VAL,
> - .gain = ST_ACCEL_1_FS_AVL_4_GAIN,
> + .value = 0x01,
> + .gain = IIO_G_TO_M_S_2(2000),
> },
> [2] = {
> .num = ST_ACCEL_FS_AVL_8G,
> - .value = ST_ACCEL_1_FS_AVL_8_VAL,
> - .gain = ST_ACCEL_1_FS_AVL_8_GAIN,
> + .value = 0x02,
> + .gain = IIO_G_TO_M_S_2(4000),
> },
> [3] = {
> .num = ST_ACCEL_FS_AVL_16G,
> - .value = ST_ACCEL_1_FS_AVL_16_VAL,
> - .gain = ST_ACCEL_1_FS_AVL_16_GAIN,
> + .value = 0x03,
> + .gain = IIO_G_TO_M_S_2(12000),
> },
> },
> },
> .bdu = {
> - .addr = ST_ACCEL_1_BDU_ADDR,
> - .mask = ST_ACCEL_1_BDU_MASK,
> + .addr = 0x23,
> + .mask = 0x80,
> },
> .drdy_irq = {
> - .addr = ST_ACCEL_1_DRDY_IRQ_ADDR,
> - .mask_int1 = ST_ACCEL_1_DRDY_IRQ_INT1_MASK,
> - .mask_int2 = ST_ACCEL_1_DRDY_IRQ_INT2_MASK,
> - .addr_ihl = ST_ACCEL_1_IHL_IRQ_ADDR,
> - .mask_ihl = ST_ACCEL_1_IHL_IRQ_MASK,
> + .addr = 0x22,
> + .mask_int1 = 0x10,
> + .mask_int2 = 0x08,
> + .addr_ihl = 0x25,
> + .mask_ihl = 0x02,
> .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
> },
> - .multi_read_bit = ST_ACCEL_1_MULTIREAD_BIT,
> + .multi_read_bit = true,
> .bootime = 2,
> },
> {
> - .wai = ST_ACCEL_2_WAI_EXP,
> + .wai = 0x32,
> .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
> .sensors_supported = {
> [0] = LIS331DLH_ACCEL_DEV_NAME,
> @@ -368,18 +180,18 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
> },
> .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
> .odr = {
> - .addr = ST_ACCEL_2_ODR_ADDR,
> - .mask = ST_ACCEL_2_ODR_MASK,
> + .addr = 0x20,
> + .mask = 0x18,
> .odr_avl = {
> - { 50, ST_ACCEL_2_ODR_AVL_50HZ_VAL, },
> - { 100, ST_ACCEL_2_ODR_AVL_100HZ_VAL, },
> - { 400, ST_ACCEL_2_ODR_AVL_400HZ_VAL, },
> - { 1000, ST_ACCEL_2_ODR_AVL_1000HZ_VAL, },
> + { .hz = 50, .value = 0x00, },
> + { .hz = 100, .value = 0x01, },
> + { .hz = 400, .value = 0x02, },
> + { .hz = 1000, .value = 0x03, },
> },
> },
> .pw = {
> - .addr = ST_ACCEL_2_PW_ADDR,
> - .mask = ST_ACCEL_2_PW_MASK,
> + .addr = 0x20,
> + .mask = 0xe0,
> .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
> .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
> },
> @@ -388,69 +200,69 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
> .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
> },
> .fs = {
> - .addr = ST_ACCEL_2_FS_ADDR,
> - .mask = ST_ACCEL_2_FS_MASK,
> + .addr = 0x23,
> + .mask = 0x30,
> .fs_avl = {
> [0] = {
> .num = ST_ACCEL_FS_AVL_2G,
> - .value = ST_ACCEL_2_FS_AVL_2_VAL,
> - .gain = ST_ACCEL_2_FS_AVL_2_GAIN,
> + .value = 0x00,
> + .gain = IIO_G_TO_M_S_2(1000),
> },
> [1] = {
> .num = ST_ACCEL_FS_AVL_4G,
> - .value = ST_ACCEL_2_FS_AVL_4_VAL,
> - .gain = ST_ACCEL_2_FS_AVL_4_GAIN,
> + .value = 0x01,
> + .gain = IIO_G_TO_M_S_2(2000),
> },
> [2] = {
> .num = ST_ACCEL_FS_AVL_8G,
> - .value = ST_ACCEL_2_FS_AVL_8_VAL,
> - .gain = ST_ACCEL_2_FS_AVL_8_GAIN,
> + .value = 0x03,
> + .gain = IIO_G_TO_M_S_2(3900),
> },
> },
> },
> .bdu = {
> - .addr = ST_ACCEL_2_BDU_ADDR,
> - .mask = ST_ACCEL_2_BDU_MASK,
> + .addr = 0x23,
> + .mask = 0x80,
> },
> .drdy_irq = {
> - .addr = ST_ACCEL_2_DRDY_IRQ_ADDR,
> - .mask_int1 = ST_ACCEL_2_DRDY_IRQ_INT1_MASK,
> - .mask_int2 = ST_ACCEL_2_DRDY_IRQ_INT2_MASK,
> - .addr_ihl = ST_ACCEL_2_IHL_IRQ_ADDR,
> - .mask_ihl = ST_ACCEL_2_IHL_IRQ_MASK,
> - .addr_od = ST_ACCEL_2_OD_IRQ_ADDR,
> - .mask_od = ST_ACCEL_2_OD_IRQ_MASK,
> + .addr = 0x22,
> + .mask_int1 = 0x02,
> + .mask_int2 = 0x10,
> + .addr_ihl = 0x22,
> + .mask_ihl = 0x80,
> + .addr_od = 0x22,
> + .mask_od = 0x40,
> .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
> },
> - .multi_read_bit = ST_ACCEL_2_MULTIREAD_BIT,
> + .multi_read_bit = true,
> .bootime = 2,
> },
> {
> - .wai = ST_ACCEL_3_WAI_EXP,
> + .wai = 0x40,
> .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
> .sensors_supported = {
> [0] = LSM330_ACCEL_DEV_NAME,
> },
> .ch = (struct iio_chan_spec *)st_accel_16bit_channels,
> .odr = {
> - .addr = ST_ACCEL_3_ODR_ADDR,
> - .mask = ST_ACCEL_3_ODR_MASK,
> + .addr = 0x20,
> + .mask = 0xf0,
> .odr_avl = {
> - { 3, ST_ACCEL_3_ODR_AVL_3HZ_VAL },
> - { 6, ST_ACCEL_3_ODR_AVL_6HZ_VAL, },
> - { 12, ST_ACCEL_3_ODR_AVL_12HZ_VAL, },
> - { 25, ST_ACCEL_3_ODR_AVL_25HZ_VAL, },
> - { 50, ST_ACCEL_3_ODR_AVL_50HZ_VAL, },
> - { 100, ST_ACCEL_3_ODR_AVL_100HZ_VAL, },
> - { 200, ST_ACCEL_3_ODR_AVL_200HZ_VAL, },
> - { 400, ST_ACCEL_3_ODR_AVL_400HZ_VAL, },
> - { 800, ST_ACCEL_3_ODR_AVL_800HZ_VAL, },
> - { 1600, ST_ACCEL_3_ODR_AVL_1600HZ_VAL, },
> + { .hz = 3, .value = 0x01, },
> + { .hz = 6, .value = 0x02, },
> + { .hz = 12, .value = 0x03, },
> + { .hz = 25, .value = 0x04, },
> + { .hz = 50, .value = 0x05, },
> + { .hz = 100, .value = 0x06, },
> + { .hz = 200, .value = 0x07, },
> + { .hz = 400, .value = 0x08, },
> + { .hz = 800, .value = 0x09, },
> + { .hz = 1600, .value = 0x0a, },
> },
> },
> .pw = {
> - .addr = ST_ACCEL_3_ODR_ADDR,
> - .mask = ST_ACCEL_3_ODR_MASK,
> + .addr = 0x20,
> + .mask = 0xf0,
> .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
> },
> .enable_axis = {
> @@ -458,75 +270,75 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
> .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
> },
> .fs = {
> - .addr = ST_ACCEL_3_FS_ADDR,
> - .mask = ST_ACCEL_3_FS_MASK,
> + .addr = 0x24,
> + .mask = 0x38,
> .fs_avl = {
> [0] = {
> .num = ST_ACCEL_FS_AVL_2G,
> - .value = ST_ACCEL_3_FS_AVL_2_VAL,
> - .gain = ST_ACCEL_3_FS_AVL_2_GAIN,
> + .value = 0x00,
> + .gain = IIO_G_TO_M_S_2(61),
> },
> [1] = {
> .num = ST_ACCEL_FS_AVL_4G,
> - .value = ST_ACCEL_3_FS_AVL_4_VAL,
> - .gain = ST_ACCEL_3_FS_AVL_4_GAIN,
> + .value = 0x01,
> + .gain = IIO_G_TO_M_S_2(122),
> },
> [2] = {
> .num = ST_ACCEL_FS_AVL_6G,
> - .value = ST_ACCEL_3_FS_AVL_6_VAL,
> - .gain = ST_ACCEL_3_FS_AVL_6_GAIN,
> + .value = 0x02,
> + .gain = IIO_G_TO_M_S_2(183),
> },
> [3] = {
> .num = ST_ACCEL_FS_AVL_8G,
> - .value = ST_ACCEL_3_FS_AVL_8_VAL,
> - .gain = ST_ACCEL_3_FS_AVL_8_GAIN,
> + .value = 0x03,
> + .gain = IIO_G_TO_M_S_2(244),
> },
> [4] = {
> .num = ST_ACCEL_FS_AVL_16G,
> - .value = ST_ACCEL_3_FS_AVL_16_VAL,
> - .gain = ST_ACCEL_3_FS_AVL_16_GAIN,
> + .value = 0x04,
> + .gain = IIO_G_TO_M_S_2(732),
> },
> },
> },
> .bdu = {
> - .addr = ST_ACCEL_3_BDU_ADDR,
> - .mask = ST_ACCEL_3_BDU_MASK,
> + .addr = 0x20,
> + .mask = 0x08,
> },
> .drdy_irq = {
> - .addr = ST_ACCEL_3_DRDY_IRQ_ADDR,
> - .mask_int1 = ST_ACCEL_3_DRDY_IRQ_INT1_MASK,
> - .mask_int2 = ST_ACCEL_3_DRDY_IRQ_INT2_MASK,
> - .addr_ihl = ST_ACCEL_3_IHL_IRQ_ADDR,
> - .mask_ihl = ST_ACCEL_3_IHL_IRQ_MASK,
> + .addr = 0x23,
> + .mask_int1 = 0x80,
> + .mask_int2 = 0x00,
> + .addr_ihl = 0x23,
> + .mask_ihl = 0x40,
> .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
> .ig1 = {
> - .en_addr = ST_ACCEL_3_IG1_EN_ADDR,
> - .en_mask = ST_ACCEL_3_IG1_EN_MASK,
> + .en_addr = 0x23,
> + .en_mask = 0x08,
> },
> },
> - .multi_read_bit = ST_ACCEL_3_MULTIREAD_BIT,
> + .multi_read_bit = false,
> .bootime = 2,
> },
> {
> - .wai = ST_ACCEL_4_WAI_EXP,
> + .wai = 0x3a,
> .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
> .sensors_supported = {
> [0] = LIS3LV02DL_ACCEL_DEV_NAME,
> },
> .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
> .odr = {
> - .addr = ST_ACCEL_4_ODR_ADDR,
> - .mask = ST_ACCEL_4_ODR_MASK,
> + .addr = 0x20,
> + .mask = 0x30, /* DF1 and DF0 */
> .odr_avl = {
> - { 40, ST_ACCEL_4_ODR_AVL_40HZ_VAL },
> - { 160, ST_ACCEL_4_ODR_AVL_160HZ_VAL, },
> - { 640, ST_ACCEL_4_ODR_AVL_640HZ_VAL, },
> - { 2560, ST_ACCEL_4_ODR_AVL_2560HZ_VAL, },
> + { .hz = 40, .value = 0x00, },
> + { .hz = 160, .value = 0x01, },
> + { .hz = 640, .value = 0x02, },
> + { .hz = 2560, .value = 0x03, },
> },
> },
> .pw = {
> - .addr = ST_ACCEL_4_PW_ADDR,
> - .mask = ST_ACCEL_4_PW_MASK,
> + .addr = 0x20,
> + .mask = 0xc0,
> .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
> .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
> },
> @@ -535,51 +347,51 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
> .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
> },
> .fs = {
> - .addr = ST_ACCEL_4_FS_ADDR,
> - .mask = ST_ACCEL_4_FS_MASK,
> + .addr = 0x21,
> + .mask = 0x80,
> .fs_avl = {
> [0] = {
> .num = ST_ACCEL_FS_AVL_2G,
> - .value = ST_ACCEL_4_FS_AVL_2_VAL,
> - .gain = ST_ACCEL_4_FS_AVL_2_GAIN,
> + .value = 0x00,
> + .gain = IIO_G_TO_M_S_2(1024),
> },
> [1] = {
> .num = ST_ACCEL_FS_AVL_6G,
> - .value = ST_ACCEL_4_FS_AVL_6_VAL,
> - .gain = ST_ACCEL_4_FS_AVL_6_GAIN,
> + .value = 0x01,
> + .gain = IIO_G_TO_M_S_2(340),
> },
> },
> },
> .bdu = {
> - .addr = ST_ACCEL_4_BDU_ADDR,
> - .mask = ST_ACCEL_4_BDU_MASK,
> + .addr = 0x21,
> + .mask = 0x40,
> },
> .drdy_irq = {
> - .addr = ST_ACCEL_4_DRDY_IRQ_ADDR,
> - .mask_int1 = ST_ACCEL_4_DRDY_IRQ_INT1_MASK,
> + .addr = 0x21,
> + .mask_int1 = 0x04,
> .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
> },
> - .multi_read_bit = ST_ACCEL_4_MULTIREAD_BIT,
> + .multi_read_bit = true,
> .bootime = 2, /* guess */
> },
> {
> - .wai = ST_ACCEL_5_WAI_EXP,
> + .wai = 0x3b,
> .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
> .sensors_supported = {
> [0] = LIS331DL_ACCEL_DEV_NAME,
> },
> .ch = (struct iio_chan_spec *)st_accel_8bit_channels,
> .odr = {
> - .addr = ST_ACCEL_5_ODR_ADDR,
> - .mask = ST_ACCEL_5_ODR_MASK,
> + .addr = 0x20,
> + .mask = 0x80,
> .odr_avl = {
> - { 100, ST_ACCEL_5_ODR_AVL_100HZ_VAL },
> - { 400, ST_ACCEL_5_ODR_AVL_400HZ_VAL, },
> + { .hz = 100, .value = 0x00, },
> + { .hz = 400, .value = 0x01, },
> },
> },
> .pw = {
> - .addr = ST_ACCEL_5_PW_ADDR,
> - .mask = ST_ACCEL_5_PW_MASK,
> + .addr = 0x20,
> + .mask = 0x40,
> .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
> .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
> },
> @@ -588,54 +400,58 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
> .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
> },
> .fs = {
> - .addr = ST_ACCEL_5_FS_ADDR,
> - .mask = ST_ACCEL_5_FS_MASK,
> + .addr = 0x20,
> + .mask = 0x20,
> + /*
> + * TODO: check these resulting gain settings, these are
> + * not in the datsheet
> + */
> .fs_avl = {
> [0] = {
> .num = ST_ACCEL_FS_AVL_2G,
> - .value = ST_ACCEL_5_FS_AVL_2_VAL,
> - .gain = ST_ACCEL_5_FS_AVL_2_GAIN,
> + .value = 0x00,
> + .gain = IIO_G_TO_M_S_2(18000),
> },
> [1] = {
> .num = ST_ACCEL_FS_AVL_8G,
> - .value = ST_ACCEL_5_FS_AVL_8_VAL,
> - .gain = ST_ACCEL_5_FS_AVL_8_GAIN,
> + .value = 0x01,
> + .gain = IIO_G_TO_M_S_2(72000),
> },
> },
> },
> .drdy_irq = {
> - .addr = ST_ACCEL_5_DRDY_IRQ_ADDR,
> - .mask_int1 = ST_ACCEL_5_DRDY_IRQ_INT1_MASK,
> - .mask_int2 = ST_ACCEL_5_DRDY_IRQ_INT2_MASK,
> - .addr_ihl = ST_ACCEL_5_IHL_IRQ_ADDR,
> - .mask_ihl = ST_ACCEL_5_IHL_IRQ_MASK,
> - .addr_od = ST_ACCEL_5_OD_IRQ_ADDR,
> - .mask_od = ST_ACCEL_5_OD_IRQ_MASK,
> + .addr = 0x22,
> + .mask_int1 = 0x04,
> + .mask_int2 = 0x20,
> + .addr_ihl = 0x22,
> + .mask_ihl = 0x80,
> + .addr_od = 0x22,
> + .mask_od = 0x40,
> .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
> },
> - .multi_read_bit = ST_ACCEL_5_MULTIREAD_BIT,
> + .multi_read_bit = false,
> .bootime = 2, /* guess */
> },
> {
> - .wai = ST_ACCEL_6_WAI_EXP,
> + .wai = 0x32,
> .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
> .sensors_supported = {
> [0] = H3LIS331DL_DRIVER_NAME,
> },
> .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
> .odr = {
> - .addr = ST_ACCEL_6_ODR_ADDR,
> - .mask = ST_ACCEL_6_ODR_MASK,
> + .addr = 0x20,
> + .mask = 0x18,
> .odr_avl = {
> - { 50, ST_ACCEL_6_ODR_AVL_50HZ_VAL },
> - { 100, ST_ACCEL_6_ODR_AVL_100HZ_VAL, },
> - { 400, ST_ACCEL_6_ODR_AVL_400HZ_VAL, },
> - { 1000, ST_ACCEL_6_ODR_AVL_1000HZ_VAL, },
> + { .hz = 50, .value = 0x00, },
> + { .hz = 100, .value = 0x01, },
> + { .hz = 400, .value = 0x02, },
> + { .hz = 1000, .value = 0x03, },
> },
> },
> .pw = {
> - .addr = ST_ACCEL_6_PW_ADDR,
> - .mask = ST_ACCEL_6_PW_MASK,
> + .addr = 0x20,
> + .mask = 0x20,
> .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
> .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
> },
> @@ -644,38 +460,38 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
> .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
> },
> .fs = {
> - .addr = ST_ACCEL_6_FS_ADDR,
> - .mask = ST_ACCEL_6_FS_MASK,
> + .addr = 0x23,
> + .mask = 0x30,
> .fs_avl = {
> [0] = {
> .num = ST_ACCEL_FS_AVL_100G,
> - .value = ST_ACCEL_6_FS_AVL_100_VAL,
> - .gain = ST_ACCEL_6_FS_AVL_100_GAIN,
> + .value = 0x00,
> + .gain = IIO_G_TO_M_S_2(49000),
> },
> [1] = {
> .num = ST_ACCEL_FS_AVL_200G,
> - .value = ST_ACCEL_6_FS_AVL_200_VAL,
> - .gain = ST_ACCEL_6_FS_AVL_200_GAIN,
> + .value = 0x01,
> + .gain = IIO_G_TO_M_S_2(98000),
> },
> [2] = {
> .num = ST_ACCEL_FS_AVL_400G,
> - .value = ST_ACCEL_6_FS_AVL_400_VAL,
> - .gain = ST_ACCEL_6_FS_AVL_400_GAIN,
> + .value = 0x03,
> + .gain = IIO_G_TO_M_S_2(195000),
> },
> },
> },
> .bdu = {
> - .addr = ST_ACCEL_6_BDU_ADDR,
> - .mask = ST_ACCEL_6_BDU_MASK,
> + .addr = 0x23,
> + .mask = 0x80,
> },
> .drdy_irq = {
> - .addr = ST_ACCEL_6_DRDY_IRQ_ADDR,
> - .mask_int1 = ST_ACCEL_6_DRDY_IRQ_INT1_MASK,
> - .mask_int2 = ST_ACCEL_6_DRDY_IRQ_INT2_MASK,
> - .addr_ihl = ST_ACCEL_6_IHL_IRQ_ADDR,
> - .mask_ihl = ST_ACCEL_6_IHL_IRQ_MASK,
> + .addr = 0x22,
> + .mask_int1 = 0x02,
> + .mask_int2 = 0x10,
> + .addr_ihl = 0x22,
> + .mask_ihl = 0x80,
> },
> - .multi_read_bit = ST_ACCEL_6_MULTIREAD_BIT,
> + .multi_read_bit = true,
> .bootime = 2,
> },
> {
> @@ -685,18 +501,18 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
> },
> .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
> .odr = {
> - .addr = ST_ACCEL_7_ODR_ADDR,
> - .mask = ST_ACCEL_7_ODR_MASK,
> + .addr = 0x20,
> + .mask = 0x30,
> .odr_avl = {
> - { 280, ST_ACCEL_7_ODR_AVL_280HZ_VAL, },
> - { 560, ST_ACCEL_7_ODR_AVL_560HZ_VAL, },
> - { 1120, ST_ACCEL_7_ODR_AVL_1120HZ_VAL, },
> - { 4480, ST_ACCEL_7_ODR_AVL_4480HZ_VAL, },
> + { .hz = 280, .value = 0x00, },
> + { .hz = 560, .value = 0x01, },
> + { .hz = 1120, .value = 0x02, },
> + { .hz = 4480, .value = 0x03, },
> },
> },
> .pw = {
> - .addr = ST_ACCEL_7_PW_ADDR,
> - .mask = ST_ACCEL_7_PW_MASK,
> + .addr = 0x20,
> + .mask = 0xc0,
> .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
> .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
> },
> @@ -708,7 +524,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
> .fs_avl = {
> [0] = {
> .num = ST_ACCEL_FS_AVL_2G,
> - .gain = ST_ACCEL_7_FS_AVL_2_GAIN,
> + .gain = IIO_G_TO_M_S_2(488),
> },
> },
> },
> @@ -719,11 +535,11 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
> .bdu = {
> },
> .drdy_irq = {
> - .addr = ST_ACCEL_7_DRDY_IRQ_ADDR,
> - .mask_int1 = ST_ACCEL_7_DRDY_IRQ_INT1_MASK,
> + .addr = 0x21,
> + .mask_int1 = 0x04,
> .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
> },
> - .multi_read_bit = ST_ACCEL_7_MULTIREAD_BIT,
> + .multi_read_bit = false,
> .bootime = 2,
> },
> };
>
next prev parent reply other threads:[~2016-11-12 15:29 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-09 15:09 [PATCH 0/4] ST Sensors: inline sensor data Linus Walleij
2016-11-09 15:09 ` [PATCH 1/4] iio: accel: st_accel: inline per-sensor data Linus Walleij
2016-11-12 15:29 ` Jonathan Cameron [this message]
2016-11-12 15:34 ` Jonathan Cameron
2016-11-09 15:09 ` [PATCH 2/4] iio: gyro: st_gyro: " Linus Walleij
2016-11-12 15:38 ` Jonathan Cameron
2016-11-09 15:09 ` [PATCH 3/4] iio: magn: st_magn: " Linus Walleij
2016-11-12 15:45 ` Jonathan Cameron
2016-11-09 15:10 ` [PATCH 4/4] iio: pressure: st_pressure: " Linus Walleij
2016-11-12 15:50 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ccbc6b6d-c5a7-7fe0-b82d-a27780e6836e@kernel.org \
--to=jic23@kernel.org \
--cc=denis.ciocca@st.com \
--cc=giuseppe.barba@st.com \
--cc=gregor.boirie@parrot.com \
--cc=leonard.crestez@intel.com \
--cc=linus.walleij@linaro.org \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).